HNR-Flyme 6.7.12.29 IR (MM6.0.1) source files for AMOI L861 (aka Stonex One / Santin Dante-Marconi)
Built packages available for download at :
-
Main Repo L861 https://goo.gl/9GSjzW (subfolder \99_ROM_M_FLYMEOS_6_712x\01_HNR_COMPILED_PACKAGE )
-
NeedRom page https://www.needrom.com/download/l861-hnr-flyme-6-7-12-29ir/
-
This repo requires GIT >= 1.8.2 & GIT-LFS = check your git version & install/enable LFS. Instructions on https://github.com/git-lfs/git-lfs/wiki/Installation
-
Once repo has been downloaded/cloned check that custom_app.sh & custom_jar_sh have 755 permissions. Otherwise fix them.
-
Repo files have been already patched. Therefore, if You just want to build it, setup Flyme build environment (according to instructions below) and launch directly flyme fullota.
Author: FlymeDev_Finder(XDA:sunnyfinder)
Installing the JDK
Run the following:
$ sudo apt-get update
$ sudo apt-get install openjdk-8-jdk
Installing required packages
$ sudo apt-get install git-core gnupg flex bison gperf build-essential zip curl zlib1g-dev gcc-multilib g++-multilib libc6-dev-i386 lib32ncurses5-dev x11proto-core-dev libx11-dev lib32z-dev ccache libgl1-mesa-dev libxml2-utils xsltproc unzip
Configuring USB Access
Under GNU/Linux systems (and specifically under Ubuntu systems), regular users can't directly access USB devices by default. The system needs to be configured to allow such access.
The recommended approach is to create a file at /etc/udev/rules.d/51-android.rules (as the root user).
To do this, run the following command to download the 51-android.txt file attached to this site, modify it to include your username, and place it in the correct location:
$ wget -S -O - http://source.android.com/source/51-android.txt | sed "s/<username>/$USER/" | sudo tee >/dev/null /etc/udev/rules.d/51-android.rules; sudo udevadm control --reload-rules
Installing Repo
Repo is a tool that makes it easier to work with Git in the context of Android. For more information about Repo, see the Developing section.
To install Repo:
Make sure you have a bin/ directory in your home directory and that it is included in your path:
$ mkdir ~/bin
$ PATH=~/bin:$PATH
Download the Repo tool and ensure that it is executable:
$ curl https://storage.googleapis.com/git-repo-downloads/repo > ~/bin/repo
$ chmod a+x ~/bin/repo
Installing Android Studio
In order to build patchrom project, you must have Android Studio installed.
Download Link：https://developer.android.com/studio/index.html
Install Instructions：https://developer.android.com/studio/install.html
Add the SDK tools and platform-tools to PATH
$ sudo gedit .bashrc
Add the line:
export PATH=$PATH:/home/$username$/Android/Sdk/tools:/home/username/Anroid/Sdk/platform-tools
Save and exit. Then run the following:
$ source .bashrc
Downloading the Source
Use repo init with "-b" for download the branch you want
Use
$ repo sync
to upgrade to the latest code from flyme git
To initialize your local repository using the patchrom trees, use a command like this:
$ mkdir Flyme
$ cd Flyme
$ repo init -u https://github.com/FlymeOS/manifest.git -b marshmallow-6.0
Then to sync up:
$ repo sync -c -j4
If the connection has failed or the download code is too slow, use the following command:
$ repo init --repo-url git://github.com/FlymeOS/repo.git -u https://github.com/FlymeOS/manifest.git -b marshmallow-6.0 --no-repo-verify
$ repo sync --no-clone-bundle -c -j4
After downloading the code, run the following to initialize the build environment:
$ source build/envsetup.sh
Create new device’s folder (Such as: demo), the later work will be done in this folder:
$ mkdir -p devices/demo
$ cd devices/demo
Make sure your device has root privilege or a rooted kernel (preferred), and connect your phone to your computer, then open the phone’s USB debug mode. Then run the following to build a full Flyme patchrom :
Generate device’s config file – Makefile
The command will attempt to automatically extract boot.img and recovery.img from the device. If the extraction fails, you need to copy boot.img and recovery.img into the device’s folder, and then re-execute the command. Then you should modify the Makefile to config the correct device’s information
$ flyme config
Generate new device’s project folder
This will generate a stockrom.zip, flash this zip in recovery mode to ensure it works normally
$ flyme newproject
Automatically add the Flyme code into kernel and framework
$ flyme patchall
Resolve conflicts
Automatic patching may cause code merge conflicts. The conflict will be marked in the following form. You must resolve these conflicts in the device's folder.
<<<<<<< VENDOR
Vendor Code
=======
Flyme Code
>>>>>>> BOSP
Generate the completed Flyme ROM package
$ flyme fullota
Flyme Version Upgrade
Run the following to upgrade Flyme version for your device
$ flyme cleanall
$ make clean
$ flyme upgrade
If You experience R/W permission KO and/or 'cp stat' issues during fullota phase, switch before to shell environment with root privileges (sudo -s in Ubuntu for instance).
Just in case of issues with merge-passages, change APKTOOL_FRAME_PATH attribution in build/locals.mk (line 105), in order to match source dir for installed files - according to error message.
For instance, if you get :
<<<<<<<
apktool if(install framework): merged ...
I: Framework installed to: /root/.local/share/apktool/framework/1-merged_l861.apk
I: Framework installed to: /root/.local/share/apktool/framework/63-merged_l861.apk
I: Framework installed to: /root/.local/share/apktool/framework/2-merged_l861.apk
cp: cannot stat '/home/android/.local/share/apktool/framework//1-merged_l861.apk': No such file or directory
>>>>>>>
Apply the following changes to build/locals.mk :
<<<<<<<
APKTOOL_FRAME_PATH := /root/.local/share/apktool/framework
>>>>>>>
-
Github: Put new issue at Github (https://github.com/FlymeOS/manifest/issues/new)
-
Send an email to the Flyme Patchrom Engineer-Mr. Zou Junhua ([email protected]) with your log
-
Flyme Developer Hub(Telegram Group): https://t.me/joinchat/F29EBUL0GBexLoHo1gMTsg