Cant integrate with home assistant

[bugac]

So far im spending my 3 day, on this noob problem, cant find answer online. because I feel like I'm missing something, and I'm the only one in the world facing this problem
i made to work my M5StickC with my daikin altherma 3

but it is imposible to add these atributes as sensors to HA.

Found git example from here:

`sensor:

• platform: template
  sensors:
  espaltherma_outdoorairtemp:
  friendly_name: "Outdoor air temp"
  value_template: "{{ state_attr('sensor.althermasensors','Außenlufttemp.') }}"
  unit_of_measurement: '°C'
  espaltherma_fan:
  friendly_name: "Fan 1"
  value_template: "{{ state_attr('sensor.althermasensors','Ventilator 1 (10 rpm)') * 10 }}"
  unit_of_measurement: 'rpm'
  espaltherma_flow:
  friendly_name: "Flow sensor"
  value_template: "{{ state_attr('sensor.althermasensors','Durchflussmenge (l/min)') }}"
  unit_of_measurement: 'l/min'
  espaltherma_refigtemp:
  friendly_name: "Refig temp"
  value_template: "{{ state_attr('sensor.althermasensors','R3T-Kältemittel Flüssigkeitstemperatur') }}"
  unit_of_measurement: '°C'
  espaltherma_inverter:
  friendly_name: "INV current"
  value_template: "{{ state_attr('sensor.althermasensors','INV Primärstrom (A)') }}"
  unit_of_measurement: 'A'
  espaltherma_operationstate:
  friendly_name: "Error type"
  value_template: "{{ state_attr('sensor.althermasensors','Betrieb / Störung') }}"
  espaltherma_voltage:
  friendly_name: "Voltage (V)"
  value_template: "{{ state_attr('sensor.althermasensors','Spannung (V)') }}"
  espaltherma_wateroutlet:
  friendly_name: "Leaving water temp"
  value_template: "{{ state_attr('sensor.althermasensors','Auslass Wasser BUH Temp. (R2T)') }}"
  unit_of_measurement: '°C'
  espaltherma_operation:
  friendly_name: "Operation mode"
  value_template: "{{ state_attr('sensor.althermasensors','Aktuelle Betriebsart') }}"
  espaltherma_iuoperation:
  friendly_name: "Indoor Operation mode"
  value_template: "{{ state_attr('sensor.althermasensors','I/U betriebsart') }}"
  espaltherma_dhw:
  friendly_name: "DHW temp"
  value_template: "{{ state_attr('sensor.althermasensors','R5T-Brauchwassertemperatur im Speicher') }}"
  unit_of_measurement: '°C'
  espaltherma_cop:
  friendly_name: "COP"
  unit_of_measurement: 'COP'
  value_template: "{% if
  state_attr('sensor.althermasensors','Aktuelle Betriebsart') in ('Heating', 'Cooling')
  and state_attr('sensor.althermasensors','Frostschutz') == 'OFF'
  and state_attr('sensor.althermasensors','INV Primärstrom (A)') | float != 0
  %}
  {{
  (
  (
  state_attr('sensor.althermasensors','Durchflussmenge (l/min)') | float
  • 0.06
  • 1.16
  • (
    state_attr('sensor.althermasensors','Auslass Wasser Wärmetauscher Temp. (R1T)') | float
    • state_attr('sensor.althermasensors','R4T-Wasser Rücklauftemp. vor dem Plattenwärmetauscher') | float
      )
      )
      /
      (
      state_attr('sensor.althermasensors','INV Primärstrom (A)') | float
  • state_attr('sensor.althermasensors','Spannung (V)') | float
    / 1000
    )
    )
    | round(2)
    | abs
    }}
    {% else %}
    0
    {% endif %}"`

Added it to configuration.yaml

and all i got is this -

when im trying to configure any of these i see this message

maybe it's related to my problem that the sensors don't work?

what is wrong?

[bugac]

still no answer. Am I the only one having this problem?
Linking esp readings to home assistant UI?

[raomin]

Looks like you're linking german attribute names:

With English attribute definition:

[raomin]

your value_template should be more like:
value_template: "{{ state_attr('sensor.altherma','Operation Mode') }}"