diff --git a/Printed-Parts/SCAD/rpi-zero-frame.scad b/Printed-Parts/SCAD/rpi-zero-frame.scad
index 7176149d..f8c743fa 100644
--- a/Printed-Parts/SCAD/rpi-zero-frame.scad
+++ b/Printed-Parts/SCAD/rpi-zero-frame.scad
@@ -1,5 +1,5 @@
 // PRUSA iteration4
-// RaspberryPi Zero frame
+// RaspberryPi Zero and RaspberryPi Zero 2 frame
 // GNU GPL v3
 // Josef Průša <iam@josefprusa.cz> and contributors
 // http://www.reprap.org/wiki/Prusa_Mendel
@@ -14,7 +14,7 @@ for (x=[0, 58])
         translate([x, y, -3])
             cylinder(d=6, h=3.01);
     }
-    
+
 for (x=[0, 58])
     hull(){
         for (y=[0, -23]) {
@@ -31,7 +31,10 @@ hull(){
 }
 
 translate([21, 1, -4.5/2])
-    cube([7, 4, 4.5], true);
+    cube([2, 4, 4.5], true);
+
+translate([32, 1, -4.5/2])
+    cube([4, 4, 4.5], true);
 
 difference() {
     union(){
@@ -45,10 +48,10 @@ difference() {
         translate([45, -3, -4.5])
             cube([10,8,2]);
     }
-    
+
     translate([3, -23+3, -4.55])
         cube([58-6, 23-6, 2.1]);
-    
+
     // pin holes
     for (x=[7.4:2.54:17]){
         translate([x, -24.3, -4.55])
@@ -56,11 +59,10 @@ difference() {
     }
     translate([7.4+6*2.54, -24.3+2.54, -4.55])
         cylinder(d=1.8, h=2.1);
-    
+
     translate([6+3, 0, -4.5/2-0.7])
         cube([12, 6.1, 1], true);
-    
-    
+
     // holes for EINSY pins
     hull(){
         for (x=[1.4, -1.2])
@@ -68,33 +70,33 @@ difference() {
                 translate([x, y, -4.55])
                     cylinder(d=2, h=2.1);
     }
-    
+
     hull(){
         for (x=[0, -2])
             translate([x, -24.3, -4.55])
                 cylinder(d=2, h=2.1);   // not valid manifold ?
     }
-    
+
     hull(){
         for (x=[30.4:2.54:41])
             for (y=[-22.79, -20.25])
                 translate([x, y, -4.55])
                     cylinder(d=2, h=2.1);
     }
-    
+
     hull(){
         for (x=[49.4, 51.94])
             for (y=[-25.33, -22.79, -20.25])
                 translate([x, y, -4.55])
                     cylinder(d=2, h=2.1);
     }
-    
+
     hull(){
         for (y=[-0.8, 1.74, 4.28])
             translate([51.2, y, -4.55])
                 cylinder(d=2, h=1.8);
     }
-    
+
     hull(){
         for (y=[-3.34, -0.8])
             translate([45, y, -4.55])
@@ -102,9 +104,9 @@ difference() {
     }
     translate([45, 4.28, -4.55])
         cylinder(d=2, h=1.8);
-    
+
     for (y=[-2.3, -4.84]){
         translate([-3.5, y, -4.55])
             cylinder(d=2, h=2.1);
     }
-}
\ No newline at end of file
+}