Skip to content
This repository has been archived by the owner on Feb 8, 2024. It is now read-only.

Latest commit

 

History

History
220 lines (159 loc) · 7.79 KB

stacker_yaml.md

File metadata and controls

220 lines (159 loc) · 7.79 KB
Raw

The stacker.yaml file

When doing a stacker build, the behavior of stacker is specified by the yaml directives below. In addition to these, stacker allows variable substitions of several forms. For example, a line like:

$ONE ${{TWO}} ${{THREE:3}}

When run with stacker build --substitute ONE=1 --substitute TWO=2 is processed in stacker as:

1 2 3

That is, variables of the form $FOO or ${FOO} are supported, and variables with ${FOO:default} a default value will evaluate to their default if not specified on the command line. It is an error to specify a ${FOO} style without a default; to make the default an empty string, use ${FOO:}.

In addition to substitutions provided on the command line, the following variables are also available with their values from either command line flags or stacker-config file.

STACKER_STACKER_DIR config name 'stacker_dir', cli flag '--stacker-dir'-
STACKER_ROOTFS_DIR  config name 'rootfs_dir', cli flag '--roots-dir'
STACKER_OCI_DIR     config name 'oci_dir', cli flag '--oci-dir'

The stacker build environment will have the following environment variables available for reference:

  • STACKER_LAYER_NAME: the name of the layer being built. STACKER_LAYER_NAME will be my-build when the run section below is executed.

    my-build:
  run: echo "Your layer is ${STACKER_LAYER_NAME}"

from

The from directive describes the base image that stacker will start from. It takes the form:

from:
    type: $type
    url: $url
    tag: $tag
    insecure: true

Some directives are irrelevant depending on the type. Supported types are:

docker: url is required, insecure is optional. When insecure is specified, stacker attempts to connect via http instead of https to the Docker Hub.

tar: url is required, everything else is ignored.

oci: url is required, of the form path:tag. This uses the OCI image at url (which may be a local path).

built: tag is required, everything else is ignored. built bases this layer on a previously specified layer in the stacker file.

import

The import directive describes what files should be made available in /stacker during the run phase. There are three forms of importing supported today:

/path/to/file

Will import a file or directory from the local filesystem. If the file or directory changes between stacker builds, it will be hashed and the new file will be imported on subsequent builds.

http://example.com/foo.tar.gz

Will import foo.tar.gz and make it available in /stacker. Note that stacker will NOT update this file unless the cache is cleared, to avoid excess network usage. That means that updates after the first time stacker downloads the file will not be reflected.

stacker://$name/path/to/file

Will grab /path/to/file from the previously built layer $name.

import hash

The import directive also supports specifying the hash(sha256sum) of import source, for all the three forms presented above, for example:

import:
  - path: config.json
    hash: f55af805b012017bc....
  - path: http://example.com/foo.tar.gz
    hash: b458dfd63e7883a64....
  - path: stacker://$name/path/to/file
    hash: f805b012017bc769a....

Before copying the file it will check if the requested hash matches the actual one.

stacker build supports the flag --require-flag which checks that all http(s) remote imports have an hash in all stacker YAMLs.

This new import mode can be combined with the old one, for example:

import:
  - path: "config.json
    hash: "BEEFcafeaaaaAAAA...."
  - /path/to/file

overlay_dirs

This directive works only with OverlayFS backend storage.

The overlay_dirs directive describes what directories (content) from the host should be available in the container's filesystem. It preserves all file/dirs attributes but no owner or group.

overlay_dirs:
  - source: /path/to/directory
    dest: /usr/local/          ## optional arg, default is '/'
  - source: /path/to/directory2

This example will result in all the files/dirs from the host's /path/to/directory to be available under container's /usr/local/ and all the files/dirs from the host's /path/to/directory2 to be available under container's /

environment, labels, working_dir, volumes, cmd, entrypoint, user

These all correspond exactly to the similarly named bits in the OCI image config spec, and are available for users to pass things through to the runtime environment of the image.

generate_labels

The generate_labels entry is similar to run in that it contains a list of commands to run inside the generated rootfs. It runs after the run section is done, and its mutations to the filesystem are not recorded, except in one case /oci-labels. /oci-labels is a special directory where this code can write a file, and the name of the file will be the OCI label name, and the content will be the label content.

build_env and build_env_passthrough

By default, environment variables do not pass through (pollute) the build environment.

build_env: this is a dictionary with environment variable definitions. their values will be present in the build's environment.

build_env_passthrough: This is a list of regular expressions that work as a filter on which environment variables should be passed through from the current env into the container. To let all variables through simply set build_env_passthrough: [".*"]

If build_env_passthrough is not set, then the default value is to allow through proxy variables HTTP_PROXY, HTTPS_PROXY, FTP_PROXY, http_proxy, https_proxy, ftp_proxy.

Values in the build_env override values passed through via

full_command

Because of the odd behavior of cmd and entrypoint (and the inherited nature of these from previous stacker layers), full_command provides a way to set the full command that will be executed in the image, clearing out any previous cmd and entrypoint values that were set in the image.

build_only

build_only: indicates whether or not to include this layer in the final OCI image. This can be useful in conjunction with an import from this layer in another image, if you want to isolate the build environment for a binary but not include all of its build dependencies.

binds

binds: specifies bind mounts from the host to the container. There are two formats:

binds:
    - /foo/bar -> /bar/baz
- /zomg

The first one binds /foo/bar to /bar/baz, and the second host /zomg to container /zomg.

Right now there is no awareness of change for any of these bind mounts, so --no-cache should be used to re-build if the content of the bind mount has changed.

config

config key is a special type of entry in the root in the stacker.yaml file. It cannot contain a layer definition, it is used to provide configuration applicable for building all the layers defined in this file. For example,

config:
    prerequisites:
        - ../folder2/stacker.yaml
        - ../folder3/stacker.yaml
prerequisites

If the prerequisites list is present under the config key, stacker will make sure to build all the layers in the stacker.yaml files found at the paths contained in the list. This way stacker supports building multiple stacker.yaml files in the correct order.

In this particular case the parent folder of the current folder, let's call it parent, has 3 subfolders folder1, folder2 and folder3, each containing a stacker.yaml file. The example config above is in parent/folder1/stacker.yaml.

When stacker build -f parent/folder1/stacker.yaml is invoked, stacker would search for the other two stacker.yaml files and build them first, before building the stacker.yaml specified in the command line.