Won't boot

My device wont start up

If you device won't boot and leaves you on a black or white screen, then you will need to power off the device and then hold down the UP button while you power it on. This could take up to 10 seconds.

If this does not work, then try the same thing but this time holding the down button (Remembering to wait up to 10 seconds).

What this is doing is loading a different LCD driver to get your devices screen to work.

Once that is done you should be able to reboot normally without any issues.

Description

• UP key = LCD driver 1
• DOWN key = LCD driver 2
• OK/SELECT key = Reset/Automatic detection

Note: H2+ usually require you to hold the UP key on the first boot to configure them.

This is valid from nightly version n_220406 and stable release version: No stable release yet