This document will address the most common issues you may have while running Stake Wars and setting up your node. Contributions and corrections are welcome!
- My validator is in the
current_validatorsset, but it's not producing blocks - I get
Telemetry dataerror in the logs - I get a
Peer stream errorwhile syncing with other nodes - My node seems stuck at 98% of the sync, without progressing
- My node is stuck at zero peers
- I get a
Server error: Timeoutwhen I use near-shell - I get a
type: 'UntypedError'if I try to use near-shell - I get a
KeyNotFounderror if I try to use near-shell - I get a timeout error from the RPC after I send a command
- I had a wallet created on nearprotocol.com, and now I can't access it anymore
- I try to login with near-shell, but I receive the
ERR_CONNECTION_REFUSEDerror on the website
- I used
near sendinstead ofnear callto my staking pool - I used
near stakeinstead ofnear callto stake funds to my pool - I get a
GuestPanicwhen I try to unstake funds from my staking pool - I get a
GuestPanicwhen I try to withdraw funds from my staking pool - I set up the wrong owner to my staking pool
This issue can happen if there's a mismatch of public_key or account_id between your validator node and the staking transaction.
On your node
Check if your node is actively validating blocks, by inspecting the logs with the command docker logs nearcore --tail 5 2>&1 | grep "V/" or nearup logs | grep "V/" -n 5 (the latter if you are not using Docker). If this command produces zero results, your node may be misconfigured.
Issue the command cat .near/betanet/validator_key.json | grep "account_id\|public_key". You should expect the following result:
"account_id": "c2.nearkat",
"public_key": "ed25519:Zk6cdWPxmK1H5cy3K3GbyDRUyHz9w8a9Q2Mb7ezKiHW",
Note this result and proceed to verify the staking pool configuration.
On your near-shell machine
Issue the command curl -d '{"jsonrpc": "2.0", "method": "validators", "id": "dontcare", "params": [null]}' -H 'Content-Type: application/json' https://rpc.betanet.near.org | jq -c '.result.current_validators[] | select(.account_id | contains ("c2.nearkat"))'. (Remember to replace c2.nearkat with the account_id from your validator_key.json)
You should expect the following result:
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
100 39719 100 39641 100 78 342k 690 --:--:-- --:--:-- --:--:-- 343k
{"account_id":"c2.nearkat","public_key":"ed25519:Zk6cdWPxmK1H5cy3K3GbyDRUyHz9w8a9Q2Mb7ezKiHW","is_slashed":false,"stake":"289982335519735189330363217693","shards":[0],"num_produced_blocks":196,"num_expected_blocks":197}
If the account_id or public_key are different from your validator_key.json, your pool is misconfigured, and you have to correct either the node or the staking pool config.
Remediation
If your account_id is wrong, follow these steps:
- Stop your node with
nearup stop - Edit the file
~/.near/betanet/validator.jsonand manually change theaccount_idwith the one from the RPC query - Delete the data folder with the command
rm -rf ~/.near/betanet/data - Restart your node
You might expect a result similar to this one:
Using officially compiled binary
Downloaded binary version is up to date
Our genesis version is up to date
Stake for user 'c2.nearkat' with 'ed25519:Zk6cdWPxmK1H5cy3K3GbyDRUyHz9w8a9Q2Mb7ezKiHW'
Starting NEAR client...
Node is running!
To check logs call: `nearup logs` or `nearup logs --follow`
If successful, num_produced_blocks will be higher than zero.
Otherwise, if your public_key is wrong, follow these steps:
- Issue the command
near call <ACCOUNT_ID> update_staking_key '{"stake_public_key":"ed25519:Zk6cdWPxmK1H5cy3K3GbyDRUyHz9w8a9Q2Mb7ezKiHW"}' --accountId <OWNER_ID> - Issue the command
curl -d '{"jsonrpc": "2.0", "method": "validators", "id": "dontcare", "params": [null]}' -H 'Content-Type: application/json' https://rpc.betanet.near.org | jq -c '.result.current_proposals[] | select(.account_id | contains ("<ACCOUNT_ID>"))'
(where <ACCOUNT_ID> is the ID of your staking pool, and <OWNER_ID> is your main wallet).
You might expect a result similar to this one:
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
100 33922 100 33844 100 78 367k 866 --:--:-- --:--:-- --:--:-- 368k
{"account_id":"c2.nearkat","public_key":"ed25519:Zk6cdWPxmK1H5cy3K3GbyDRUyHz9w8a9Q2Mb7ezKiHW","stake":"101665314574769168872143240913"}
If successful, num_produced_blocks will be higher than zero.
Remember to ping your staking pool to re-issue your staking transaction, as your node will most probably be kicked out in the next epoch, and you will lose your validator seat. Use the command near call <ACCOUNT_ID> ping '{}' --accountId <OWNER_ID>.
Sometimes, after you restart your node or shortly after an update, you may see this error in the logs:
Jun 10 23:17:30.014 INFO telemetry: Telemetry data could not be sent due to: Failed to connect to host: Timeout out while establishing connection
This is not an issue, you can safely ignore this error as it only impacts the ability of the BetaNet explorer to receive data from your node. As a result, it is possible that your node won't appear in the list at the address https://explorer.betanet.near.org/nodes/validators.
If you see an error similar to this one:
May 26 04:39:58.712 WARN network: Peer stream error: Os { code: 104, kind: ConnectionReset, message: "Connection reset by peer" }
it is possible that one of your peers disconnected your node. It may happen if:
- your node is not running the same version of the other peer
- your node is a validator, but it's producing zero blocks (see above)
If this message is repeated multiple times and your node gets zero connected peers, you may need to stop nearup, clean entirely the data in the folder at ~/.near/betanet, and start the node again.
Heads up: deleting this folder will generate a new public key for your node and will need a resync. As a result, your node may result offline and be kicked out.
The counter simply measures the number of blocks remaining to reach the tip of the chain, and not the amount of computation necessary to complete the operation. As a result, it is possible that certain blocks contain more information and need more time to be processed, showing slower progress.
If your node has no active peers, you may need to reset your .near/betanet folder, and generate a new node key. Check the in the logs if the number of peers is not 0/0/40:
Jun 10 23:18:15.092 INFO stats: # 6949467 Downloading headers 5% -/86 8/8/40 peers ⬇ 493.4kiB/s ⬆ 181.2kiB/s 0.00 bps 0 gas/s CPU: 80%, Mem: 462.5 MiB
Other peers may have banned your node because it is running an outdated release of nearcore.
On your node Issue one of these two commands:
docker logs nearcore 2>&1 | grep Buildif you are running nearup using Dockernearup logs | grep Buildif you are running nearup with the --nodocker switch
You should expect a result similar to this one:
Jun 10 23:17:11.628 INFO near: Version: 1.0.0, Build: b30864b8, Latest Protocol: 22
On your near-shell machine
Issue the command curl -d '{"jsonrpc": "2.0", "method": "status", "id": "dontcare", "params": [null]}' -H 'Content-Type: application/json' https://rpc.betanet.near.org | jq .result.version
You should expect a result similar to this one:
{
"version": "1.0.0",
"build": "b30864b8"
}
If you see different version or build, your node is running an outdated release of nearcore and needs a reset.
Remediation
- Stop nearup with
nearup stop - Make a backup copy of your validator_key.json file with the command
cp ~/.near/betanet/validator_key.json ~ - Clean the betanet folder with the command
rm -rf ~/.near/betanet - [ONLY FOR DOCKER USERS] run the command
docker system prune --volumesto clean up the containers and the cache - Start nearup again with the command
nearup betanet(remember to add--nodockerand the--binary-pathif you are using them) - Press enter, leaving empty the validator ID
- Stop nearup again with
nearup stop - Clean the data folder in
~/.near/betanet/data - Copy the validator key in the betanet folder with the command
cp ~/validator_key.json ~/.near/betanet/ - Start nearup again
At the end of this process, you should expect a message like the one below:
Using officially compiled binary
Downloaded binary version is up to date
Our genesis version is up to date
Stake for user 'c2.nearkat' with 'ed25519:Zk6cdWPxmK1H5cy3K3GbyDRUyHz9w8a9Q2Mb7ezKiHW'
Starting NEAR client...
Node is running!
To check logs call: `nearup logs` or `nearup logs --follow`
This process will use nearup scripts to generate the config files, the node keys and the genesis.json file from scratch while keeping the validator_key intact (which is used by the staking pool contract). Be sure that only one node at a time is using your validator_key.json, or you risk to double-sign blocks.
If you are on BetaNet, we often apply experimental features that can impact RPC's stability.
The error may look similar to this one:
Error: TypedError: [-32000] Server error: Timeout
at JsonRpcProvider.sendJsonRpc (/usr/lib/node_modules/near-shell/node_modules/near-api-js/lib/providers/json-rpc-provider.js:129:27)
at processTicksAndRejections (internal/process/task_queues.js:97:5)
at async Account.signAndSendTransaction (/usr/lib/node_modules/near-shell/node_modules/near-api-js/lib/account.js:97:22)
at async scheduleFunctionCall (/usr/lib/node_modules/near-shell/commands/call.js:30:34)
at async Object.handler (/usr/lib/node_modules/near-shell/utils/exit-on-error.js:4:9) {
type: 'UntypedError'
}
Remediation:
- Look for the transaction on the BetaNet Explorer
- Point near-shell to a local node
- The network is not producing new blocks
1. Look for the transaction on the BetaNet Explorer
Most of the time, your transaction was correctly sent to the network, regardless of the timeout error in near-shell.
If you don't see the transaction in the explorer, you can issue the command again and refres the explorer page.
2. Point near-shell to a local node
Download and run nearup on your local machine, and point near-shell to the localhost for the queries. As an example, the command near state test would become near state test --nodeUrl http://127.0.0.1:3030 --helperUrl http://127.0.0.1:3030.
You should see a result similar to this one:
Using options: {
nodeUrl: 'http://127.0.0.1:3030',
helperUrl: 'http://127.0.0.1:3030',
networkId: 'betanet',
contractName: undefined,
walletUrl: 'https://wallet.betanet.near.org',
useLedgerKey: "44'/397'/0'/0'/1'",
accountId: 'test',
initialBalance: null
}
Account test
{
amount: '78447050893413945551764297785000',
locked: '0',
code_hash: '11111111111111111111111111111111',
storage_usage: 182,
storage_paid_at: 0,
block_height: 7095636,
block_hash: '9ukamhGe6fFgDnHXWvUQJoJhWXVQqKxqEr7zmmugfyWs',
formattedAmount: '78,447,050.893413945551764297785'
}
3. The network is not producing new blocks
In the unlikely situation that NEAR Protocol is not producing new blocks, near-shell cannot issue commands that change the state of the ledger, such as near call or near login. In this case, you have to check the status of the network from the page at https://status.nearprotocol.com/ and wait when the services are back online to perform such actions.
Most of the time you can find the reason of the error by scrolling up a few lines:
Using options: {
networkId: 'default',
nodeUrl: 'https://rpc.testnet.near.org',
contractName: undefined,
walletUrl: 'https://wallet.testnet.near.org',
helperUrl: 'https://helper.testnet.near.org',
useLedgerKey: "44'/397'/0'/0'/1'",
accountId: 'nearkat',
initialBalance: null
}
Error: TypedError: [-32000] Server error: account nearkat does not exist while viewing
at JsonRpcProvider.sendJsonRpc (/usr/lib/node_modules/near-shell/node_modules/near-api-js/lib/providers/json-rpc-provider.js:129:27)
at processTicksAndRejections (internal/process/task_queues.js:97:5)
at async JsonRpcProvider.query (/usr/lib/node_modules/near-shell/node_modules/near-api-js/lib/providers/json-rpc-provider.js:61:24)
at async Account.fetchState (/usr/lib/node_modules/near-shell/node_modules/near-api-js/lib/account.js:46:23)
at async Account.state (/usr/lib/node_modules/near-shell/node_modules/near-api-js/lib/account.js:53:9)
at async Near.account (/usr/lib/node_modules/near-shell/node_modules/near-api-js/lib/near.js:41:9)
at async exports.viewAccount (/usr/lib/node_modules/near-shell/index.js:161:19)
at async Object.handler (/usr/lib/node_modules/near-shell/utils/exit-on-error.js:4:9) {
type: 'UntypedError'
}
Simply analyze the Error: line of the message. In this case, account nearkat does not exist while viewing means I'm trying to view the user nearkat on TestNet network and not BetaNet (as you can see in the walletUrl and helperUrl fields of the options).
Your near-shell may not have the keys to operate on your account, showing an error similar to the one below:
}
Sending 1 NEAR to test from bowen.test
Error: TypedError: Can not sign transactions for account bowen.test, no matching key pair found in Signer.
at Account.signAndSendTransaction (/usr/local/lib/node_modules/near-shell/node_modules/near-api-js/lib/account.js:91:19)
at async exports.sendMoney (/usr/local/lib/node_modules/near-shell/index.js:198:33)
at async Object.handler (/usr/local/lib/node_modules/near-shell/utils/exit-on-error.js:4:9) {
type: 'KeyNotFound'
}
Remediations
You can use near login again, and authorize your machine, or just copy your json key from your backups to the ~/.near-credentials/betanet/ folder. Previous versions of near-shell were storing credentials in the neardev folder, so if your account name is nearkat.betanet you may look for it with the command find -name "*nearkat*.json", showing results as below:
./betanet/c1.nearkat.betanet.json
./betanet/nearkat.betanet.json
./neardev/betanet/c2.nearkat.betanet.json
./neardev/betanet/c3.nearkat.betanet.json
./neardev/betanet/c1.nearkat.json
./neardev/betanet/c1.nearkat.betanet.json
./neardev/betanet/c2.nearkat.json
./neardev/betanet/nearkat.betanet.json
./neardev/betanet/nearkat.json
./.near-credentials/betanet/c2.nearkat.json
The files ./betanet/nearkat.betanet.json and ./neardev/betanet/nearkat.betanet.json contain a valid private key to control the account nearkat.betanet, so moving them to the directory ./.near-credentials/betanet/ will allow your near-shell to sign a transaction for that account.
Heads Up: This solution doesn't apply if you are using a Ledger Wallet.
NEAR RPC may be unresponsive or too slow to reply, generating this type of error. The first step is to control that all the services are running correctly from the url https://status.nearprotocol.com/.
If all services are operational, try to use the explorer yourself, by visiting the url https://explorer.betanet.near.org. If the explorer itself is slow or unresponsive, you can try to use your local node.
Remediation:
You can call the same RPC commands to your local node, replacing https://rpc.betanet.near.org with your node's IP address. As an example the command
curl -d '{"jsonrpc": "2.0", "method": "status", "id": "dontcare", "params": [null]}' -H 'Content-Type: application/json' https://rpc.betanet.near.org | jq
becomes
curl -d '{"jsonrpc": "2.0", "method": "status", "id": "dontcare", "params": [null]}' -H 'Content-Type: application/json' http://127.0.0.1:3030 | jq
(note that you have to use plain http, and specify the port 3030).
NEAR Protocol recently switched from the website nearprotocol.com to near.org. As a result, some cookies have been reset and your browser can't find your wallet.
Remediation: You have two main ways to recover your account:
- Use the method above to recover your json wallet file, and copy it where it is needed
- Recover your wallet using the recovery email, sms or seed passphrase
While option 1 is already documented above, option 2 requires additional steps if you want to use the recovery email with a magic link. More specifically, the magic link may still point to nearprotocol.com, so your recovery could fail.
Look for any email coming from [email protected] and copy/paste the "Recover Account" link on your favorite text editor.
The result should be similar to the one below:
http://undefined/recover-with-link/nearkat/crazy%20horse%20battery%20staple
Your seed passphrase is separated by %20, so you can manually separate the keys (in this case they are crazy, horse, battery, staple) and try to recover your account using the passphrase method.
Heads Up: always use the right wallet address to recover your account:
| Network | Wallet URL |
|---|---|
| MainNet | https://wallet.near.org |
| TestNet | https://wallet.testnet.near.org |
| BetaNet | https://wallet.betanet.near.org |
| DevNet | https://wallet.devnet.near.org |
Trying to use the right passphrase with the wrong wallet URL will produce no results.
You may encounter this error if you copy/paste the url from the login window. The login dialog may be similar to the one below:
~ $ near login
Using options: {
networkId: 'betanet',
nodeUrl: 'https://rpc.betanet.near.org',
contractName: undefined,
walletUrl: 'https://wallet.betanet.near.org',
helperUrl: 'https://helper.betanet.near.org',
helperAccount: 'betanet',
useLedgerKey: "44'/397'/0'/0'/1'",
initialBalance: null
}
Please authorize NEAR Shell on at least one of your accounts.
If your browser doesn't automatically open, please visit this URL
https://wallet.betanet.near.org/login/?title=NEAR+Shell&public_key=ed25519%3AAvQK7mV22ua7QW2Me4BCGzVL2XBMehk1oH6XUuAmQ5iZ&success_url=http%3A%2F%2F127.0.0.1%3A5000
Please authorize at least one account at the URL above.
Which account did you authorize for use with NEAR Shell?
Enter it here (if not redirected automatically):
Near-shell generates an URL to automatically redirect to http%3A%2F%2F127.0.0.1%3A5000, generating the error if your near-shell is not running locally but on a remote server.
Remediation This error has no impact on a successful login. Simply return to the shell window, and type the username you want to use on near-shell in the propmt screen. If successful, you should see a message similar to the one below:
Enter it here (if not redirected automatically):
nearkat.betanet
Logged in as [ nearkat.betanet ] with public key [ ed25519:AvQK7m... ] successfully
Heads up: most of the commands below imply that you are using the most recent Staking Pool Contract to participate in the Stake Wars.
This command will produce a loss of these funds. More specifically, the staking pool will use these funds as very generous rewards, distributing them to all delegators, based on their shares.
Remediation:
There is no remediation, as using the command near send will produce a key not found error:
}
Sending 10 NEAR to pepe.betanet from c2.nearkat
Error: TypedError: Can not sign transactions for account c2.nearkat, no matching key pair found in Signer.
at Account.signAndSendTransaction (/usr/lib/node_modules/near-shell/node_modules/near-api-js/lib/account.js:91:19)
at processTicksAndRejections (internal/process/task_queues.js:97:5)
at async exports.sendMoney (/usr/lib/node_modules/near-shell/index.js:198:33)
at async Object.handler (/usr/lib/node_modules/near-shell/utils/exit-on-error.js:4:9) {
type: 'KeyNotFound'
}
If your pool is correctly deployed, you shouldn't have the keys to perform this command. If you still have the keys to the staking pool, this command will generate an invalid state of the contract, locking your funds but not using them to stake as a validator.
Remediation:
Try to unstake your funds with the command near stake <POOL_ID> <VALIDATOR_PUBKEY> 0 --accountId <POOL_ID>, where 0 is the amount you want to stake with pool. After three epochs, you should be able to recover the funds and deploy a new pool from scratch.
Please note that:
- this solution won't work if you issue pool commands like
near call <POOL_ID> pingornear call <POOL_ID> stakeas they will re-stake the funds - moving the funds out of the pool with
near sendwill steal the tokens of other delegators and will put the contract into an inconsistent/unresponsive state - this solution wouldn't be possible if you deleted all the access keys to your pool
Use the command near keys <POOL_ID> | grep length to see if your pool is locked:
~ $ near keys blazenet | grep length
[ [length]: 0 ]
This error may appear when you use a command similar to this one:
near call c2.nearkat unstake '{"amount": "10094702816452052707222750328"}' --accountId pepe.betanet
This call is trying to unstake a certain amount of YoctoNEAR, with no success:
{
type: 'GuestPanic',
index: 0,
panic_msg: "panicked at 'The new total balance should not be less than the old total balance', src/lib.rs:509:9"
}
Remediation:
- Ping the contract
- Unstake the funds
- Send a small amount of NEAR tokens
In detail:
- Call the ping method with the command
near call <POOL_ID> ping '{}' --accountId <ACCOUNT_ID>, to spend some gas from <ACCOUNT_ID> and calculate the rewards of the pool. You should see a result similar to this:
~ $ near call blazenet ping '{}' --accountId pepe.betanet
Using options: {
accountId: 'pepe.betanet',
networkId: 'betanet',
nodeUrl: 'https://rpc.betanet.near.org',
contractName: 'blazenet',
walletUrl: 'https://wallet.betanet.near.org',
helperUrl: 'https://helper.betanet.near.org',
useLedgerKey: "44'/397'/0'/0'/1'",
gas: '100000000000000',
amount: '0',
methodName: 'ping',
args: '{}',
initialBalance: null
}
Scheduling a call: blazenet.ping({})
[blazenet]: Epoch 50: Contract received total rewards of 28434755107890138499172929 tokens. New total staked balance is 118722681336756467553977389908. Total number of shares 113966017752308135773807659229
[blazenet]: Total rewards fee is 2729550721834190531620296 stake shares.
''
- Unstake the funds
Use the command
near view <POOL_ID> get_account_staked_balance '{"account_id": "<ACCOUNT_ID"}'to receive the exact amount of YoctoNEAR available in the account. The result should be as follows:
~ $ near view blazenet get_account_staked_balance '{"account_id": "pepe.betanet"}'
Using options: {
networkId: 'betanet',
nodeUrl: 'https://rpc.betanet.near.org',
contractName: 'blazenet',
walletUrl: 'https://wallet.betanet.near.org',
helperUrl: 'https://helper.betanet.near.org',
useLedgerKey: "44'/397'/0'/0'/1'",
methodName: 'get_account_staked_balance',
args: '{"account_id": "pepe.betanet"}',
initialBalance: null
}
View call: blazenet.get_account_staked_balance({"account_id": "pepe.betanet"})
'25074462113250696720368460556'
Afterward, you can issue the command near call <POOL_ID> unstake '{"amount": "<AMOUNT>"}' --accountId <ACCOUNT_ID> where it is important to copy/paste an amount in YoctoNEAR wich is minor or equal to the amount above (25074462113250696720368460556), and set the <ACCOUNT_ID> with the owner of the staked funds (in this case --accountId pepe.betanet).
The result should be similar to the one below:
$ near call blazenet unstake '{"amount":"100"}' --accountId pepe.betanet
Using options: {
accountId: 'pepe.betanet',
networkId: 'betanet',
nodeUrl: 'https://rpc.betanet.near.org',
contractName: 'blazenet',
walletUrl: 'https://wallet.betanet.near.org',
helperUrl: 'https://helper.betanet.near.org',
useLedgerKey: "44'/397'/0'/0'/1'",
gas: '100000000000000',
amount: '0',
methodName: 'unstake',
args: '{"amount":"100"}',
initialBalance: null
}
Scheduling a call: blazenet.unstake({"amount":"100"})
[blazenet]: Epoch 49: Contract received total rewards of 954000293751552732160506517 tokens. New total staked balance is 118694246581648577415478217080. Total number of shares 113963288201586301583276039030
[blazenet]: Total rewards fee is 91597540363018443977531872 stake shares.
[blazenet]: @pepe.betanet unstaking 102. Spent 97 staking shares. Total 104 unstaked balance and 24250598102835383494138245619 staking shares
[blazenet]: Contract total staked balance is 118694246581648577415478216979. Total number of shares 113963288201586301583276038933
''
- If you still can't issue any
callmethod on your staking pool, it is possible that you need additional funds to pay for the storage (see the Introduction to NEAR Protocol’s Economics for more details). Sending 1 NEAR token should be enough. From the shell, you can issue the commandnear send <ACCOUNT_ID> <POOL_ID> 1to add some funds, and try if the contract becomes responsive again.
Heads Up: Any funds sent to a locked pool become inaccessible, so you won't be able to withdraw them later on.
The widthdraw command is used to move back to your wallet any unstaked funds in the pool. You have to check if:
- the amount you are trying to withdraw is higher than your unstaked balance
- the unstaked balance is not yet available and still in the lock-period You should see an error similar to the one below:
{
type: 'GuestPanic',
index: 0,
panic_msg: "panicked at 'Not enough unstaked balance to withdraw', src/lib.rs:224:9"
}
Remediation:
- Ping the contract
- View the available unstaked balance
- Verify if the funds are unlocked
In detail:
-
is documented above, and is easily performed with the command
near call <POOL_ID> call ping '{}' --accountId <ACCOUNT_ID>. -
requires the use of the command
near call <POOL_ID> get_account_unstaked_balance '{"account_id": "<ACCOUNT_ID>"}' --accountId <ACCOUNT_ID>to show the amount of YoctoNEAR available to withdraw. You should see a result similar to the one below:
~ $ near call blazenet get_account_unstaked_balance '{"account_id":"pepe.betanet"}' --accountId pepe.betanet
Using options: {
accountId: 'pepe.betanet',
networkId: 'betanet',
nodeUrl: 'https://rpc.betanet.near.org',
contractName: 'blazenet',
walletUrl: 'https://wallet.betanet.near.org',
helperUrl: 'https://helper.betanet.near.org',
useLedgerKey: "44'/397'/0'/0'/1'",
gas: '100000000000000',
amount: '0',
methodName: 'get_account_unstaked_balance',
args: '{"account_id":"pepe.betanet"}',
initialBalance: null
}
Scheduling a call: blazenet.get_account_unstaked_balance({"account_id":"pepe.betanet"})
'104'
104 is the balance available to withdraw.
- requires the use of the command
near call <POOL_ID> is_account_unstaked_balance_available '{"account_id": "<ACCOUNT_ID"}' --accountId <ACCOUNT_ID>to see if the funds are locked or not by the protocol. NEAR allows the withdraw of unstaked funds after 3 epochs, to mitigate attacks.
By issuing this command, you should get the following result:
~ $ near view blazenet is_account_unstaked_balance_available '{"account_id": "pepe.betanet"}'
Using options: {
networkId: 'betanet',
nodeUrl: 'https://rpc.betanet.near.org',
contractName: 'blazenet',
walletUrl: 'https://wallet.betanet.near.org',
helperUrl: 'https://helper.betanet.near.org',
useLedgerKey: "44'/397'/0'/0'/1'",
methodName: 'is_account_unstaked_balance_available',
args: '{"account_id": "pepe.betanet"}',
initialBalance: null
}
View call: blazenet.is_account_unstaked_balance_available({"account_id": "pepe.betanet"})
false
If the result is not true, your withdraw command will fail, with an error similar to the one below:
{
type: 'GuestPanic',
index: 0,
panic_msg: "panicked at 'The unstaked balance is not yet available due to unstaking delay', src/lib.rs:228:9"
}
Heads up: this remediation can't make a distinction between funds unstaked at different times. It would show a false statement even if a portion of your funds was available for withdraw (in the example above 4 YoctoNEAR are available out of the 104 unstaked).
When you deploy the staking pool, you have to specify the <POOL_ID> and the <OWNER_ID>. The former is an account that will have to be locked and will receive funds by other users (the delegators). The latter is the manager of the pool, which has specific methods to configure the pool (such as change the validator node public key or the fees).
Setting the <OWNER_ID> with the same account as the <POOL_ID> will lock your pool and will make you unable to change its parameters. As a result, when you lock your staking pool you lose the capability to change any of the parameters above. The solution is to re-deploy the pool and ask your delegators to manually move their funds. Your delegators will not lose funds, but they will have to unstake, wait three epochs, and withdraw any funds that were previously locked in your misconfigured pool.
You can check the pool owner id by using the command near view <POOL_ID> get_owner_id '{}'. The resulting account should be different from the <POOL_ID> itself:
~ $ near view c2.nearkat get_owner_id '{}'
Using options: {
networkId: 'betanet',
nodeUrl: 'https://rpc.betanet.near.org',
contractName: 'c2.nearkat',
walletUrl: 'https://wallet.betanet.near.org',
helperUrl: 'https://helper.betanet.near.org',
useLedgerKey: "44'/397'/0'/0'/1'",
methodName: 'get_owner_id',
args: '{}',
initialBalance: null
}
View call: c2.nearkat.get_owner_id({})
'c2.nearkat'
In the example above, the owner is the same of the pool address, so the only way to control the pool is to have keys to the account c2.nearkat.
Remediation: You and your delegators have to unstake the funds and move them to a new pool. Expect to have your node offline more than four epochs of time: three to unlock the funds, and up to two to receive a seat.
- Join the Validator chat at [https://near.chat].
- Ask questions on Stack Overflow, using the tags nearprotocol and nearprotocol-validator.
- Submit a bug (or ask for a new feature!) directly from the Stake Wars issues section.