Skip to content

Latest commit

 

History

History
105 lines (85 loc) · 6.39 KB

README.md

File metadata and controls

105 lines (85 loc) · 6.39 KB

Service Provider meets Segment Routing...

This repository covers demo of Service Provider multi-vendor network running Segment Routing with various services on top.

... and OpenConfig

Whenever possible OpenConfig YANG modules are used to unify the configuration of Service Provider Fabric. Where it isn't possible (where OpenConfig YANG modules aren't created or not implemented by particular vendor), either vendor-native YANG modules or CLI-based Ansible playbooks are used.

Currently used network operation systems

  1. Arist EOS 4.21.1.1F
  2. Cisco IOS XR 6.5.1
  3. Nokia SR OS 16.0.R5
  4. Cumulus Linux 3.7.1

Available services

  1. IP VPN for IPV4 and IPV6 between all 3 PE
  2. EVPN (E-LAN fashion) between all 3 PE

Monitoring

InfluxData TICK (Telegraf and InfluxDB) + Grafana:

  1. Telegraf is using to collect data over SNMPv3 over IPv6 and store it in InfluxDB
  2. Another Telegraf insance collects syslog information on UDP port 6514 in RFC5424 format and stores it into another database in InfluxDB
  3. Grafana polls data out of InfluxDB to build graphs of interfaces' utilization and syslogs information

Development mode

This repositry is currently being developed, so expect the changes and pull the repository to get the latest version

To-do list

  1. Add automation for EVPNoSR services
  2. Add SR policies (static and dynamic using BGP-SR-TE)
  3. Add automatic chose of connection method use by device depending on its capabilities (CLI, NETCONF/YANG(native), NETCONF/YANG(OpenConfig))
  4. Add GRT routing service (BGP-LU for IPv4/IPv6) for Internet traffic

Version

The current version of the repository is 0.6.3

Change log

Version 0.1

  1. Initial topology is created.
  2. IP VPN is deployed.

Version 0.2

  1. Previous files are stored in backup folder in proper version.
  2. Underlay topology is updated. It starts with sp_ prefix.
  3. New overlay topology for EVPN (E-LAN) is created. It starts with evpn_elan_ prefix and located within topology folder.
  4. Initial configuration files are updated. Now all of them start with sp_ prefix.
  5. New final configuration files for EVPN (E-LAN) are created. Their names start with evpn_elan_ prefix.

Version 0.3

  1. Added folder ansible with automation of Service Provider Fabric configuration. More details in ansible/README.md.
  2. Initial configuration files are updated to anticipate minimal requirements for automation.
  3. Underlay topology file topology/sp_underlay.txt is updated with link prefixes for IPv4 and IPv6.
  4. Currently only underlay IGP (ISIS) and MPLS data plane (Segment Routing) is automated.
  5. New file with OOB topology is assed in topology/oob_management.txt.

Version 0.4

  1. Added LLDP configuration for underlay_mpls role. It's configured automatically on all Ethernet interfaces.
  2. Added BGP configuration for underla_bgp role to finalize creation of Service Provider Fabric. More details in ansible/README.md.
  3. Some changes in tasks structure in underlay_mpls role to unify and simplify the configuration and provide possibility to extend for new vendors.
  4. Added YANG tool yang_extractor_config.yml to obtain the configuration/states in particular YANG module from network function. More details in ansible/README.md.

Version 0.4.1

  1. New overlay topology for IP VPN (IPv4 and IPv6) is created. It starts with ip_vpn_ prefixi and located within topology folder.
  2. Files for EVPN (E-LAN) toplogies are slightly modified.
  3. Varios updated in README.md files across sub-folders.
  4. Underlay topology sp_underlay.txt is updated with the metic values of the interfaces.
  5. Template for configuration of Nokia for underlay_mpls roles is updated to include metric values.
  6. File main_final.yml from underlay_mpls/tasks is updated to apply via eos_config on Arista EOS network functions configuration commands not available in OpenConfig YANG modules.

Version 0.4.2

  1. Configuration of Nokia SR OS for underlay_mpls role is converted to NETCONF/YANG using Nokia native YANG modules.
  2. Configuration of Nokia SR OS for underlay_bgp role is converted to NETCONF/YANG using Nokia native YANG modules.

Version 0.5

  1. Automation for IP VPN service creation based on IETF L3VPN SVC (RFC 8299) is added. Check ansible\README.md for details how to launch.
  2. IETF L3VPN SVC service reqest is located in ansible\vars folder and starts with service_ip_vpn_ prefix.
  3. Information about default route target and route distinguishers range allocated for automated services is stored in ansible\group_vars\all\main.yml
  4. In ansible\files\ietf folders there are all IETF YANG models including L3VPN and L2VPN SVC clonned from official GitHub of Yang.
  5. To role underlay_bgp added configuration of default route policy (action: accept_route) to be used later for customer route fileting.
  6. Added customer provisioning for IP VPN using ansible\customer_equipment.yml.

Version 0.5.1

  1. Added automated configuration of SNMP version 3. More details in ansible/README.md.

Version 0.5.2

  1. Management IP addresses are changed to IPv6, so from now on the communication between management host and all VNFs is over IPv6.
  2. File hosts with actual state of project's /etc/hosts is added to files folder.

Version 0.6

  1. Added monitoring using InfluxData TICK and Grafana. Automated installation and operation over management_cloud.yml playbook. More details in ansible\README.md.
  2. OOB topology topology/oob_management.txt is updated with containers' network (Docker bridge).
  3. Mapping of IP to VNF hostname for OOB is stored in ansible/vars/etc_hosts.yml.
  4. Added ansible role to update /etc/hosts with proper OOB IPv6 addresses of network VNFs. More details in ansible\README.md.
  5. Added topology/monitoring_architecture.txt scheme with explanation how the Service Provider Fabric is monitored.

Version 0.6.1

  1. Added automated generation of self-signed certificate on InfluxDB.
  2. Communication between Telegraf and InfluxDB is moved to HTTPS.
  3. Communication between Grafana and InfluxDB is moved to HTTPS.
  4. Communication between Grafana and user is moved to HTTPS.

Version 0.6.2

  1. Automatical linking of IP addresses between containers.

Version 0.6.3

  1. Rebuild the role of cloud_monitoring.
  2. Added telegraf_syslog container, which collects the syslog information. BTW, the current limitation that it supports only RFC 5424 format, whereas Cisco, Arista and Nokia send the info in RFC 3164 format, what isn't yet compatible.