This known issue with Alcatel/Nokia OLT giving fake O5
ONU Status, OLT will hold OMCI Provisioning until correct OMCI Information
In this examplme, will be using Huawei HG8240H as example.
flash set GPON_PLOAM_FORMAT 1
flash set GPON_PLOAM_PASSWD DEFAULT012
flash set GPON_ONU_MODEL HG8240H
flash set GPON_SN HWTC12345678
flash set PON_VENDOR_ID HWTC
flash set HW_HWVER BF9.A
flash set OMCI_SW_VER1 V3R017C10S100
flash set OMCI_SW_VER2 V3R017C10S100
flash set OMCC_VER 128
flash set OMCI_TM_OPT 0
flash set OMCI_FAKE_OK 1
flash set OMCI_OLT_MODE 1
If still no luck, try flash all
to print all then see any OMCI_*
You can call to support center 0800-080-412
or using online chat from Hinet website to tell them "重整線路" to reset the OLT port and remove OMCI infomation lock.
You might try setting the following values, they were copied from a stock EdgeCore GG-11000 ONU:
flash set OMCC_VER 160
flash set OMCI_TM_OPT 1
If using DFP-34X-2C2
, one option to avoid the OMCI_SW_VER*
override after reboot is to set the following value, as discussed here:
flash set OMCI_OLT_MODE 21
The VLAN tag for the internet is not being mapped to 10
like the stock ONU, so check the output of omcicli mib get 84
to get the tag. In my case the VLAN tag for the internet is 885
.