Skip to content

Latest commit

 

History

History
195 lines (149 loc) · 6.98 KB

FLASH_GETSET_INFO.md

File metadata and controls

195 lines (149 loc) · 6.98 KB

Telnet Login:

List of default login

Explaination

ELAN_MAC_ADDR

12 Hexadecimal number maximum

GPON user can skip this because GPON encap inside GEM frame which is don't have MAC Address attached!

OUI

The first three sets of two hexadecimal numbers in a MAC Address identifies the card manufacturer

Organizationally Unique Identifier (OUI), it might require for GPON and EPON, example: flash set OUI DC2C6E

GPON_PLOAM_PASSWD

10 ASCII character or 20 HEX number for ODI DFP-34X-2C2

Need to set for OLT Authenticate your ONT stick, you can get from original ONT WebGUI.

GPON_SN

12 ASCII character maximum

Need to set for OLT Authenticate your ONT stick, enter your original ONT Serial Number, must be ASCII form HWTC12345678, you may need to convert first eight HEX digit serial number to ASCII, just like PON_VENDOR_ID

GPON_ONU_MODEL

8 ASCII character maximum

Need to set for OLT Authenticate your ONT stick, enter your original ONT Model, Example: HG8240H5

OMCI_OLT_MODE

Min 0, Max 3, Default is 0

Configure how ONT Stick handle OMCI from OLT:

Value Note OMCI Information
0 Default Mode Stock, some value are cannot be change
1 Huawei OLT Mode Huawei MA5671a
2 ZTE OLT Mode ZTE
3 Customized Mode Custom Software/Hardware Version, OMCC, etc...
21 Force own info by trigger segmention fault on DFP-34X-2C2 default value

0 and 3 behave differenly from V2801F, TWCGPON675 and DFP-34X-2C2, more testing is needed!

OMCI_FAKE_OK

0 = Disable, 1 = Enable, Default is 0

Some Fiber Vendor/Wholesale/ISP have explicit LAN Port Number provisioning or proprietary OMCI that ONT Stick cant not understand, this will make ONT Stick reply OK whatever OMCI OLT throw at!

OMCI_TM_OPT

Min 0, Max 2, Default is 2

This handle how OLT manage bandwidth, try change these value if you have slow down. found by @ccy

Value Info
0 Priority controlled
1 Rate controlled
2 Priority and Rate controlled

PON_VENDOR_ID

4 ASCII character maximum

Need to set for OLT Authenticate your ONT stick, please read your original ONT Serial Number, either in HEX digit or ASCII, if in HEX digit, you need convert first eight HEX digit to ASCII, for example 48575443 = HWTC.

Here some popular list if want to fool the OLT:

ID Vendor Name
HWTC Huawei
ZTEG ZTE
ALCL Nokia/Alcatel-Lucent
UBNT Ubiquiti
FHTT Fiber Home
RTKG Realtek
TPLG TP-Link
SCOM Sercomm
TMBB Technicolor

LAN_SDS_MODE

Min 1, Max 6

Configure how stick link negotiation with SFP, some router has specific issue, between PHY or MAC, (Layer 1 and Layer 2 perhaps?)

Value cat /proc/kmsg Mode Behavior ethtool Note
0 <4>change mode to 0(GE/FE PHY) TP 1GbaseT/100baseT 0x020 DFP-34X-2C2 Auto Detect
1 <4>change mode to 1(Fiber 1G) FIBER 1GbaseX 0x20000000000 V2801F Default
2 <4>change mode to 2(SGMII PHY) TP MII 1Gb PHY TWCGPON657 Default
3 <4>change mode to 3(SGMII MAC) MII 1Gb MAC DFP-34X-2C2 Default
4 <4>change mode to 4(HiSGMII PHY) TP MII 2.5Gb PHY
5 <4>change mode to 5(HiSGMII MAC) MII 2.5Gb MAC
6 <4>change mode to 6(2500BaseX) FIBER 2500baseX 0x8000
7 <4>change mode to 7(SGMII Force) TP? 1GbaseT DFP-34X-2C2

2.5Gb Compatibility

See Device List

DIRECT_BRIDGE_MODE

Min 0, Max 1, Default is 1

Not sure about this, it seem PON interface bridged to LAN under one br0 ?

DEVICE_TYPE

Min 0, Max 2, Default is 0

Value Mode Default
0 bridge V2801F, TWCGPON657, DFP-34X-2C2 (220304 & above)
1 router DFP-34X-2C2 (210702)
2 hybrid (both)

VLAN_CFG_TYPE

Min 0, Max 1, Default is 0

VLAN Configuration Type:

Value Mode
0 Auto Detect
1 Manual (which require VLAN_MANU_MODE to set)

VLAN_MANU_MODE

Min 0, Max 3, Default is 0

How ONU Stick handle VLAN from PON to ETH interface

Value Mode Note Explaination
0 Transparent Mode VLAN will mapped as is Map VLAN without changing original id
1 Tagging Mode VLAN Stacking / Q-in-Q Untag first VLAN layer and bridge as is
2 Remote Access Mode
3 Special Case Mode

PON_MODE

Min 1, Max 3, Default is 1

Configure ONT Stick in which mode:

Value Note
1 GPON
2 EPON
3 Ethernet

FIBER_MODE

Min 1, Max 3, Default is 0

If PON_MODE=3 is set, FIBER_MODE become available and update /proc/fiber_mode.

Value Note
0 Pre-defined
1 AN 1G
2 Auto
3 Force 1G
4 Force 100M

Enter echo 3 > /proc/fiber_mode can prevent V2801F from auto reboot, giving you time to fix VS_AUTH_KEY or firmware update, this will put XPON Stick become Ethernet Mode.

OMCI_VEIP_SLOT_ID

Integer Value, Default is 255

Virtual Ethernet Interface Point Slot Id, you may need find VEIP Id from old ONU, try save configuration and find veip, for example: Huawei HG8240H5

VS_AUTH_KEY

32 Hexadecimal number V2801F Only!

Changing ELAN_MAC_ADDR or/and HW_HWVER value, must generate new VS_AUTH_KEY. Failed to do so, V2801F stick will in auto reboot forever.

MAC_KEY

ODI DFP-DFP-34X-2C2 License Key, MD5 hashed MAC ADDRESS, introduced in 220304 firmware

Changing ELAN_MAC_ADDR value require to generate new MD5 hash of MAC_KEY

NOTE:

every flash set need reboot to take effect!

It's better that you download and save configuration, edit config.xml accordingly, it's better to empty value "" if not required, then upload modified config.xml back.

Flash Command (default)

flash set OMCI_OLT_MODE 0
flash set OMCI_FAKE_OK 0
flash set OMCI_TM_OPT 2
flash set VLAN_CFG_TYPE 0
flash set VLAN_MANU_MODE 0
flash set DIRECT_BRIDGE_MODE 1
flash set PON_MODE 1
flash set PON_VENDOR_ID GPON
flash set GPON_ONU_MODEL IGD
flash set GPON_SN GPONC6FFFFFF
flash set GPON_PLOAM_PASSWD 1234567890
flash set ELAN_MAC_ADDR 6cefc6ffffff
flash set FIBER_MODE 0
flash set DEVICE_TYPE 0
flash set OMCI_VEIP_SLOT_ID 255
flash set VS_AUTH_KEY 1CAFC40AC99B014BB013849A92942FEB
reboot