[global.config]
as = 1
router-id = "1.1.1.1"
# listen port (by default 179)
port = 1790
# to disable listening
# port = -1
# listen address list (by default "0.0.0.0" and "::")
local-address-list = ["192.168.10.1", "2001:db8::1"]
[global.apply-policy.config]
import-policy-list = ["policy1"]
default-import-policy = "reject-route"
export-policy-list = ["policy2"]
default-export-policy = "accept-route"
[[rpki-servers]]
[rpki-servers.config]
address = "210.173.170.254"
port = 323
[[bmp-servers]]
[bmp-servers.config]
address = "127.0.0.1"
port = 11019
route-monitoring-policy = "pre-policy"
statistics-timeout = 3600
[[vrfs]]
[vrfs.config]
name = "vrf1"
# If id is omitted, automatically assigned.
id = 1
rd = "65000:100"
# Each configuration for import and export RTs;
# import-rt-list
# export-rt-list
# are preferred than both-rt-list.
both-rt-list = ["65000:100"]
[[mrt-dump]]
[mrt-dump.config]
dump-type = "updates"
file-name = "/tmp/log/2006/01/02.1504.dump"
dump-interval = 180
[zebra]
[zebra.config]
enabled = true
url = "unix:/var/run/quagga/zserv.api"
redistribute-route-type-list = ["connect"]
version = 2 # version used in Quagga on Ubuntu 16.04
[[neighbors]]
[neighbors.config]
peer-as = 2
# To disable AS checking set to 0
auth-password = "password"
neighbor-address = "192.168.10.2"
# override global.config.as value
local-as = 1000
remove-private-as = "all"
# To enable peer group setting, uncomment the following
#peer-group = "my-peer-group"
# Force sending Software Version Capability, default: disabled.
#send-software-version = true
[neighbors.as-path-options.config]
allow-own-as = 1
replace-peer-as = true
[neighbors.timers.config]
connect-retry = 5
hold-time = 9
keepalive-interval = 3
[neighbors.transport.config]
passive-mode = true
local-address = "192.168.10.1"
remote-port = 2016
ttl = 64 # default value on Linux
[neighbors.ebgp-multihop.config]
enabled = true
multihop-ttl = 100
[neighbors.route-reflector.config]
route-reflector-client = true
route-reflector-cluster-id = "192.168.0.1"
[neighbors.add-paths.config]
send-max = 8
receive = true
[neighbors.graceful-restart.config]
enabled = true
notification-enabled = true
long-lived-enabled = true
# graceful restart restart time
restart-time = 20
[[neighbors.afi-safis]]
[neighbors.afi-safis.config]
afi-safi-name = "ipv4-unicast"
[neighbors.afi-safis.prefix-limit.config]
max-prefixes = 1000
shutdown-threshold-pct = 80
[neighbors.afi-safis.mp-graceful-restart.config]
enabled = true
[neighbors.afi-safis.long-lived-graceful-restart.config]
enabled = true
# long lived graceful restart restart time
restart-time = 100000
[neighbors.afi-safis.add-paths.config]
# override neighbors.add-paths.config
receive = true
send-max = 8
[[neighbors.afi-safis]]
[neighbors.afi-safis.config]
afi-safi-name = "ipv6-unicast"
[[neighbors.afi-safis]]
[neighbors.afi-safis.config]
afi-safi-name = "ipv4-labelled-unicast"
[[neighbors.afi-safis]]
[neighbors.afi-safis.config]
afi-safi-name = "ipv6-labelled-unicast"
[[neighbors.afi-safis]]
[neighbors.afi-safis.config]
afi-safi-name = "l3vpn-ipv4-unicast"
[[neighbors.afi-safis]]
[neighbors.afi-safis.config]
afi-safi-name = "l3vpn-ipv6-unicast"
[[neighbors.afi-safis]]
[neighbors.afi-safis.config]
afi-safi-name = "l2vpn-evpn"
[[neighbors.afi-safis]]
[neighbors.afi-safis.config]
afi-safi-name = "l2vpn-vpls"
[[neighbors.afi-safis]]
[neighbors.afi-safis.config]
afi-safi-name = "rtc"
[[neighbors.afi-safis]]
[neighbors.afi-safis.config]
afi-safi-name = "ipv4-encap"
[[neighbors.afi-safis]]
[neighbors.afi-safis.config]
afi-safi-name = "ipv6-encap"
[[neighbors.afi-safis]]
[neighbors.afi-safis.config]
afi-safi-name = "ipv4-flowspec"
[[neighbors.afi-safis]]
[neighbors.afi-safis.config]
afi-safi-name = "ipv6-flowspec"
[[neighbors.afi-safis]]
[neighbors.afi-safis.config]
afi-safi-name = "ipv4-mup"
[[neighbors.afi-safis]]
[neighbors.afi-safis.config]
afi-safi-name = "ipv6-mup"
[[neighbors.afi-safis]]
[neighbors.afi-safis.config]
afi-safi-name = "opaque"
[neighbors.apply-policy.config]
import-policy-list = ["policy1"]
default-import-policy = "reject-route"
export-policy-list = ["policy2"]
default-export-policy = "accept-route"
in-policy-list = ["policy3"]
default-in-policy = "reject-route"
[neighbors.route-server.config]
route-server-client = true
# To enable TTL Security, uncomment the following.
# Please note that this feature is mututally exclusive with
# "neighbors.ebgp-multihop.config".
#[neighbors.ttl-security.config]
# enabled = true
# ttl-min = 255 # 255 means directly connected
[[neighbors]]
[neighbors.config]
peer-group = "my-peer-group"
neighbor-address = "127.0.0.2"
[[peer-groups]]
[peer-groups.config]
peer-group-name = "my-peer-group"
peer-as = 65000
send-software-version = true
[[peer-groups.afi-safis]]
[peer-groups.afi-safis.config]
afi-safi-name = "ipv4-unicast"
[[dynamic-neighbors]]
[dynamic-neighbors.config]
prefix = "20.0.0.0/24"
peer-group = "my-peer-group"
[[defined-sets.prefix-sets]]
prefix-set-name = "ps0"
[[defined-sets.prefix-sets.prefix-list]]
ip-prefix = "10.0.0.0/8"
masklength-range = "24..32"
[[defined-sets.neighbor-sets]]
neighbor-set-name = "ns0"
neighbor-info-list = ["192.168.10.2", "172.13.0.0/24"]
[[defined-sets.bgp-defined-sets.community-sets]]
community-set-name = "cs0"
community-list = ["100:100"]
[[defined-sets.bgp-defined-sets.ext-community-sets]]
ext-community-set-name = "es0"
ext-community-list = ["rt:100:100", "soo:200:200"]
[[defined-sets.bgp-defined-sets.as-path-sets]]
as-path-set-name = "as0"
as-path-list = ["^100", "200$"]
[[defined-sets.bgp-defined-sets.large-community-sets]]
large-community-set-name = "ls0"
large-community-list = ["100:100:100", "200:200:200"]
[[policy-definitions]]
name = "policy1"
[[policy-definitions.statements]]
[policy-definitions.statements.conditions.match-prefix-set]
prefix-set = "ps0"
match-set-options = "any"
[policy-definitions.statements.conditions.match-neighbor-set]
neighbor-set = "ns0"
match-set-options = "invert"
[policy-definitions.statements.conditions.bgp-conditions.match-community-set]
community-set = "cs0"
match-set-options = "all"
[policy-definitions.statements.conditions.bgp-conditions.match-large-community-set]
large-community-set = "ls0"
match-set-options = "all"
[policy-definitions.statements.actions.bgp-actions.set-as-path-prepend]
as = "last-as"
repeat-n = 5
[policy-definitions.statements.actions]
route-disposition = "accept-route"
[[policy-definitions.statements]]
[policy-definitions.statements.conditions.bgp-conditions.match-ext-community-set]
ext-community-set = "es0"
[policy-definitions.statements.actions]
route-disposition = "reject-route"
[[policy-definitions]]
name = "policy2"
[[policy-definitions.statements]]
[policy-definitions.statements.conditions.bgp-conditions.match-as-path-set]
as-path-set = "as0"
[policy-definitions.statements.actions]
route-disposition = "accept-route"
[policy-definitions.statements.actions.bgp-actions.set-community]
options = "add"
[policy-definitions.statements.actions.bgp-actions.set-community.set-community-method]
communities-list = ["100:200"]
[[policy-definitions]]
name = "policy3"
[[policy-definitions.statements]]
[policy-definitions.statements.conditions.bgp-conditions.match-as-path-set]
as-path-set = "as0"
[policy-definitions.statements.actions]
route-disposition = "accept-route"
[policy-definitions.statements.actions.bgp-actions.set-community]
options = "add"
[policy-definitions.statements.actions.bgp-actions.set-community.set-community-method]
communities-list = ["100:200"]
[[policy-definitions.statements]]
[policy-definitions.statements.conditions.match-prefix-set]
prefix-set = "ps0"
match-set-options = "invert"
[policy-definitions.statements.actions]
route-disposition = "accept-route"
[policy-definitions.statements.actions.bgp-actions.set-ext-community]
options = "replace"
[policy-definitions.statements.actions.bgp-actions.set-ext-community.set-ext-community-method]
communities-list = ["soo:100:200", "rt:300:400"]
[[policy-definitions.statements]]
[policy-definitions.statements.conditions.match-neighbor-set]
neighbor-set = "ns0"
[policy-definitions.statements.actions]
route-disposition = "accept-route"
[policy-definitions.statements.actions.bgp-actions.set-ext-community]
options = "remove"
[policy-definitions.statements.actions.bgp-actions.set-ext-community.set-ext-community-method]
communities-list = ["soo:500:600", "rt:700:800"]
[[policy-definitions.statements]]
[policy-definitions.statements.conditions.bgp-conditions]
next-hop-in-list = [
"10.0.100.1/32"
]
[policy-definitions.statements.actions]
route-disposition = "accept-route"
[[policy-definitions]]
name = "route-type-policy"
[[policy-definitions.statements]]
# this statement matches with locally generated routes
[policy-definitions.statements.conditions.bgp-conditions]
route-type = "local"
[policy-definitions.statements.actions]
route-disposition = "accept-route"
[[policy-definitions.statements]]
# this statement matches with routes from iBGP peers
[policy-definitions.statements.conditions.bgp-conditions]
route-type = "internal"
[policy-definitions.statements.actions]
route-disposition = "accept-route"
[[policy-definitions.statements]]
# this statement matches with routes from eBGP peers
[policy-definitions.statements.conditions.bgp-conditions]
route-type = "external"
[policy-definitions.statements.actions]
route-disposition = "accept-route"
[[policy-definitions]]
name = "large-communty-policy"
[[policy-definitions.statements]]
# this statement adds specified large communities
[policy-definitions.statements.actions]
route-disposition = "accept-route"
[policy-definitions.statements.actions.bgp-actions.set-large-community]
options = "add"
[policy-definitions.statements.actions.bgp-actions.set-large-community.set-large-community-method]
communities-list = ["100:200:300"]
[[policy-definitions.statements]]
# this statement adds specified large communities
[policy-definitions.statements.actions]
route-disposition = "accept-route"
[policy-definitions.statements.actions.bgp-actions.set-large-community]
options = "replace"
[policy-definitions.statements.actions.bgp-actions.set-large-community.set-large-community-method]
communities-list = ["100:200:300"]
[[policy-definitions.statements]]
# this statement removes specified large communities
# regular expression is also supported
[policy-definitions.statements.actions]
route-disposition = "accept-route"
[policy-definitions.statements.actions.bgp-actions.set-large-community]
options = "remove"
[policy-definitions.statements.actions.bgp-actions.set-large-community.set-large-community-method]
communities-list = ["100:200:300", "^200:"]