BoardConfig.mk

# inherit from the proprietary version
-include vendor/oppo/r5/BoardConfigVendor.mk

TARGET_NO_BOOTLOADER := true
TARGET_BOOTLOADER_BOARD_NAME := r5
TARGET_OTA_ASSERT_DEVICE := r5,R8106,R8107
TARGET_INIT_VENDOR_LIB := libinit_r5
TARGET_UNIFIED_DEVICE := true
TARGET_PLATFORM_DEVICE_BASE := /devices/soc.0/

# Platform
TARGET_BOARD_PLATFORM := msm8916
TARGET_BOARD_PLATFORM_GPU := qcom-adreno405

# Architecture
TARGET_CPU_VARIANT := krait
TARGET_CPU_ABI := armeabi-v7a
TARGET_CPU_ABI2 := armeabi
TARGET_ARCH := arm
TARGET_ARCH_VARIANT := armv7-a-neon
TARGET_CPU_SMP := true

# Krait optimizations
TARGET_USE_KRAIT_BIONIC_OPTIMIZATION := true

BOARD_KERNEL_SEPARATED_DT := true
BOARD_KERNEL_CMDLINE := console=ttyHSL0,115200,n8 androidboot.console=ttyHSL0 androidboot.hardware=qcom user_debug=31 msm_rtb.filter=0x237 ehci-hcd.park=3 androidboot.bootdevice=7824900.sdhci androidboot.selinux=permissive
BOARD_KERNEL_BASE := 0x80000000
BOARD_RAMDISK_OFFSET := 0x01000000
BOARD_KERNEL_PAGESIZE := 2048
BOARD_CUSTOM_BOOTIMG_MK := device/oppo/r5/mkbootimg.mk

BOARD_BOOTIMAGE_PARTITION_SIZE := 0x00F00000
BOARD_RECOVERYIMAGE_PARTITION_SIZE := 0x00F00000
BOARD_SYSTEMIMAGE_PARTITION_SIZE := 1388314624
BOARD_USERDATAIMAGE_PARTITION_SIZE := 3221225472
BOARD_FLASH_BLOCK_SIZE := 131072

# global
TARGET_SPECIFIC_HEADER_PATH := device/oppo/r5/include
BOARD_USES_QCOM_HARDWARE := true
TARGET_USES_QCOM_BSP := true
COMMON_GLOBAL_CFLAGS += -DQCOM_HARDWARE -DQCOM_BSP

# Display
TARGET_QCOM_DISPLAY_VARIANT := caf
USE_OPENGL_RENDERER := true
TARGET_USES_ION := true
TARGET_USES_C2D_COMPOSITION := true
OVERRIDE_RS_DRIVER := libRSDriver_adreno.so

# Time Daemon
BOARD_USES_QC_TIME_SERVICES := true

# Audio/media
TARGET_QCOM_AUDIO_VARIANT := caf
TARGET_QCOM_MEDIA_VARIANT := caf
TARGET_ENABLE_QC_AV_ENHANCEMENTS := true

# audio
BOARD_USES_ALSA_AUDIO:= true
AUDIO_FEATURE_ENABLED_COMPRESS_VOIP := true
AUDIO_FEATURE_ENABLED_EXTN_FORMATS := true
AUDIO_FEATURE_ENABLED_EXTN_POST_PROC := true
AUDIO_FEATURE_ENABLED_FLUENCE := true
AUDIO_FEATURE_ENABLED_HFP := true
AUDIO_FEATURE_ENABLED_PCM_OFFLOAD := true
AUDIO_FEATURE_ENABLED_FLAC_OFFLOAD := true
AUDIO_FEATURE_ENABLED_PROXY_DEVICE := true
AUDIO_FEATURE_ENABLED_USBAUDIO := true
AUDIO_FEATURE_ENABLED_COMPRESS_CAPTURE := true
AUDIO_FEATURE_ENABLED_INCALL_MUSIC := true

# Camera
COMMON_GLOBAL_CFLAGS += -DNEEDS_VECTORIMPL_SYMBOLS
USE_DEVICE_SPECIFIC_CAMERA := true

# Disable secure discard because it's SLOW
BOARD_SUPPRESS_SECURE_ERASE := true

# Bluetooth
BOARD_HAVE_BLUETOOTH := true
BOARD_HAVE_BLUETOOTH_QCOM := true
BLUETOOTH_HCI_USE_MCT := true
BOARD_BLUETOOTH_BDROID_BUILDCFG_INCLUDE_DIR := device/oppo/r5/bluetooth

# Wifi
BOARD_HAS_QCOM_WLAN              := true
BOARD_WLAN_DEVICE                := qcwcn
WPA_SUPPLICANT_VERSION           := VER_0_8_X
BOARD_WPA_SUPPLICANT_DRIVER      := NL80211
BOARD_WPA_SUPPLICANT_PRIVATE_LIB := lib_driver_cmd_$(BOARD_WLAN_DEVICE)
BOARD_HOSTAPD_DRIVER             := NL80211
BOARD_HOSTAPD_PRIVATE_LIB        := lib_driver_cmd_$(BOARD_WLAN_DEVICE)
WIFI_DRIVER_FW_PATH_STA          := "sta"
WIFI_DRIVER_FW_PATH_AP           := "ap"
WIFI_DRIVER_MODULE_PATH          := "/system/lib/modules/wlan.ko"
WIFI_DRIVER_MODULE_NAME          := "wlan"

BOARD_EGL_CFG := device/oppo/r5/configs/egl.cfg

# Compatibility with pre-kitkat Qualcomm sensor HALs
SENSORS_NEED_SETRATE_ON_ENABLE := true

# charger
BOARD_CHARGER_DISABLE_INIT_BLANK := true

# power hal
#TARGET_PROVIDES_POWERHAL := true

# SELinux
#-include device/qcom/sepolicy/sepolicy.mk

#BOARD_SEPOLICY_DIRS += \
#s    device/oppo/n1/sepolicy

# Recovery:Start

# Use this flag if the board has a ext4 partition larger than 2gb
BOARD_HAS_LARGE_FILESYSTEM := true
TARGET_USERIMAGES_USE_EXT4 := true

# TWRP specific build flags
TARGET_RECOVERY_FSTAB = device/oppo/r5/configs/fstab.qcom
TW_THEME := portrait_hdpi
RECOVERY_GRAPHICS_USE_LINELENGTH := true
TARGET_RECOVERY_PIXEL_FORMAT := "BGRA_8888"
TW_NO_USB_STORAGE := true
TW_INCLUDE_JB_CRYPTO := false
TW_NO_SCREEN_BLANK := true
TW_EXCLUDE_ENCRYPTED_BACKUPS := true
TW_INCLUDE_L_CRYPTO := true
TW_TARGET_USES_QCOM_BSP := true
TW_INPUT_BLACKLIST := "accelerometer"
TW_NEW_ION_HEAP := true
BOARD_HAS_NO_REAL_SDCARD := true
BOARD_USE_CUSTOM_RECOVERY_FONT := \"roboto_23x41.h\"