Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

"sudo uuu -v -b emmc ./imx-boot-sd.bin" stuck at 100%1:12>Okay (0.646s) on MX8MM #405

Open
anfigueroa opened this issue Dec 5, 2023 · 5 comments
Open

"sudo uuu -v -b emmc ./imx-boot-sd.bin" stuck at 100%1:12>Okay (0.646s) on MX8MM #405

anfigueroa opened this issue Dec 5, 2023 · 5 comments

Comments

@anfigueroa
Copy link

anfigueroa commented Dec 5, 2023 •
edited
Loading

Hi, we are trying to flash DART-MX8M-MINI boards using Raspberry Pi 4B as the flashing device. The Raspberries use Debian 12.2.

When running

sudo uuu -v -b emmc ./imx-boot-sd.bin

We get

uuu (Universal Update Utility) for nxp imx chips -- libuuu_1.5.141-3-g3a5beb6

Build in config:
	Pctl	 Chip		 Vid	 Pid	 BcdVersion
	==================================================
	SDPS:	 MX8QXP		 0x1fc9	 0x012f	 [0x0002..0xffff]
	SDPS:	 MX8QM		 0x1fc9	 0x0129	 [0x0002..0xffff]
	SDPS:	 MX8DXL		 0x1fc9	 0x0147
	SDPS:	 MX28		 0x15a2	 0x004f
	SDPS:	 MX815		 0x1fc9	 0x013e
	SDPS:	 MX865		 0x1fc9	 0x0146
	SDPS:	 MX8ULP		 0x1fc9	 0x014a
	SDPS:	 MX8ULP		 0x1fc9	 0x014b
	SDPS:	 MX93		 0x1fc9	 0x014e
	SDPS:	 MX95		 0x1fc9	 0x015d
	SDP:	 MX7D		 0x15a2	 0x0076
	SDP:	 MX6Q		 0x15a2	 0x0054
	SDP:	 MX6D		 0x15a2	 0x0061
	SDP:	 MX6SL		 0x15a2	 0x0063
	SDP:	 MX6SX		 0x15a2	 0x0071
	SDP:	 MX6UL		 0x15a2	 0x007d
	SDP:	 MX6ULL		 0x15a2	 0x0080
	SDP:	 MX6SLL		 0x1fc9	 0x0128
	SDP:	 MX7ULP		 0x1fc9	 0x0126
	SDP:	 MXRT106X	 0x1fc9	 0x0135
	SDP:	 MX8MM		 0x1fc9	 0x0134
	SDP:	 MX8MQ		 0x1fc9	 0x012b
	SDPU:	 SPL		 0x0525	 0xb4a4	 [0x0000..0x04ff]
	SDPV:	 SPL1		 0x0525	 0xb4a4	 [0x0500..0x9998]
	SDPV:	 SPL1		 0x1fc9	 0x0151	 [0x0500..0x9998]
	SDPU:	 SPL		 0x0525	 0xb4a4	 [0x9999..0x9999]
	SDPU:	 SPL		 0x3016	 0x1001	 [0x0000..0x04ff]
	SDPV:	 SPL1		 0x3016	 0x1001	 [0x0500..0x9998]
	FBK:	 		 0x066f	 0x9afe
	FBK:	 		 0x066f	 0x9bff
	FBK:	 		 0x1fc9	 0x0153
	FB:	 		 0x0525	 0xa4a5
	FB:	 		 0x18d1	 0x0d02
	FB:	 		 0x3016	 0x0001
	FB:	 		 0x1fc9	 0x0152
	FB:	 		 0x0483	 0x0afb

Run built-in script:
 
uuu_version 1.2.39

# @_flash.bin            | bootloader
# @_image   [_flash.bin] | image burn to emmc, default is the same as bootloader

# This command will be run when i.MX6/7 i.MX8MM, i.MX8MQ
SDP: boot -f imx-boot-sd.bin

# This command will be run when ROM support stream mode
# i.MX8QXP, i.MX8QM
SDPS: boot -f imx-boot-sd.bin

# These commands will be run when use SPL and will be skipped if no spl
# SDPU will be deprecated. please use SDPV instead of SDPU
# {
SDPU: delay 1000
SDPU: write -f imx-boot-sd.bin -offset 0x57c00
SDPU: jump
# }

# These commands will be run when use SPL and will be skipped if no spl
# if (SPL support SDPV)
# {
SDPV: delay 1000
SDPV: write -f imx-boot-sd.bin -skipspl
SDPV: jump
# }

FB: ucmd setenv fastboot_dev mmc
FB: ucmd setenv mmcdev ${emmc_dev}
FB: ucmd mmc dev ${emmc_dev}
FB: flash bootloader imx-boot-sd.bin
FB: ucmd if env exists emmc_ack; then ; else setenv emmc_ack 0; fi;
FB: ucmd mmc partconf ${emmc_dev} ${emmc_ack} 1 0
FB: Done


Wait for Known USB Device Appear...
New USB Device Attached at 1:12
1:12>Start Cmd:SDP: boot -f imx-boot-sd.bin
100%1:12>Okay (0.646s)

Sometimes we get

>Start Cmd:SDP: boot -f imx-boot-sd.bin
Wait for Known USB /
Wait for Known USB |

This same execution works perfectly fine in a M1 Macbook and in a Raspberry Pi Zero with same OS and versions.

We used the same SD card from the Pi Zero 2W to boot on the Pi 4 and it still wouldn't work. This leads us to think that there might be something that uuu is not able to do properly on the Pi 4. We also tried different Pi 4 boards, none work yet.

Any help would be much appreciated.
@agusgonzaleznic
Copy link

agusgonzaleznic commented Dec 6, 2023 •
edited
Loading

Hey! im having the same issue! It's just not working upon write on a raspberry pi 4b.

Most of the times im stuck in that stage and then i get

1:12>Fail HID(W):LIBUSB_ERROR_TIMEOUT(10s)

@anfigueroa
Copy link
Author

anfigueroa commented Dec 6, 2023 •
edited
Loading

Same error when trying to flash EVK bootloader, here is the execution with libusb debug:

pi@flashing-tool-02:~/mfgtools/uuu $ ./uuu -v -V -b emmc imx-boot-imx8mmevk-sd.bin-flash_evk
[timestamp] [threadID] facility level [function call] <message>
--------------------------------------------------------------------------------
[ 0.000316] [0000061d] libusb: debug [libusb_init] created default context
[ 0.000751] [0000061d] libusb: debug [libusb_init] libusb v1.0.26.11724
[ 0.000918] [0000061d] libusb: debug [usbi_add_event_source] add fd 3 events 1
[ 0.001050] [0000061d] libusb: debug [usbi_io_init] using timer for timeouts
[ 0.001141] [0000061d] libusb: debug [usbi_add_event_source] add fd 4 events 1
[ 0.001259] [0000061d] libusb: debug [get_kernel_version] reported kernel version is 6.1.0-rpi6-rpi-v8
[ 0.001634] [0000061d] libusb: debug [op_init] found usbfs at /dev/bus/usb
[ 0.001680] [0000061d] libusb: debug [op_init] max iso packet length is (likely) 98304 bytes
[ 0.001738] [0000061d] libusb: debug [op_init] sysfs is available
[ 0.002833] [0000061e] libusb: debug [linux_udev_event_thread_main] udev event thread entering
[ 0.022079] [0000061d] libusb: debug [linux_get_device_address] getting address for device: usb1 detached: 0
[ 0.022145] [0000061d] libusb: debug [linux_get_device_address] scan usb1
[ 0.022489] [0000061d] libusb: debug [linux_get_device_address] bus=1 dev=1
[ 0.022595] [0000061d] libusb: debug [linux_enumerate_device] busnum 1 devaddr 1 session_id 257
[ 0.022689] [0000061d] libusb: debug [linux_enumerate_device] allocating new device for 1/1 (session 257)
[ 0.023708] [0000061d] libusb: debug [linux_get_device_address] getting address for device: 1-1 detached: 0
[ 0.023816] [0000061d] libusb: debug [linux_get_device_address] scan 1-1
[ 0.024123] [0000061d] libusb: debug [linux_get_device_address] bus=1 dev=2
[ 0.024223] [0000061d] libusb: debug [linux_enumerate_device] busnum 1 devaddr 2 session_id 258
[ 0.024315] [0000061d] libusb: debug [linux_enumerate_device] allocating new device for 1/2 (session 258)
[ 0.024672] [0000061d] libusb: debug [linux_get_parent_info] dev 0x5599f7bce0 (1-1) has parent 0x5599f9f200 (usb1) port 1
[ 0.025659] [0000061d] libusb: debug [linux_get_device_address] getting address for device: 1-1.2 detached: 0
[ 0.025774] [0000061d] libusb: debug [linux_get_device_address] scan 1-1.2
[ 0.026074] [0000061d] libusb: debug [linux_get_device_address] bus=1 dev=3
[ 0.026174] [0000061d] libusb: debug [linux_enumerate_device] busnum 1 devaddr 3 session_id 259
[ 0.026264] [0000061d] libusb: debug [linux_enumerate_device] allocating new device for 1/3 (session 259)
[ 0.026558] [0000061d] libusb: debug [linux_get_parent_info] dev 0x5599f9f440 (1-1.2) has parent 0x5599f7bce0 (1-1) port 2
[ 0.027400] [0000061d] libusb: debug [linux_get_device_address] getting address for device: usb2 detached: 0
[ 0.027509] [0000061d] libusb: debug [linux_get_device_address] scan usb2
[ 0.027799] [0000061d] libusb: debug [linux_get_device_address] bus=2 dev=1
[ 0.027897] [0000061d] libusb: debug [linux_enumerate_device] busnum 2 devaddr 1 session_id 513
[ 0.027987] [0000061d] libusb: debug [linux_enumerate_device] allocating new device for 2/1 (session 513)
uuu (Universal Update Utility) for nxp imx chips -- libuuu_1.5.141-3-g3a5beb6

Build in config:
	Pctl	 Chip		 Vid	 Pid	 BcdVersion
	==================================================
	SDPS:	 MX8QXP		 0x1fc9	 0x012f	 [0x0002..0xffff]
	SDPS:	 MX8QM		 0x1fc9	 0x0129	 [0x0002..0xffff]
	SDPS:	 MX8DXL		 0x1fc9	 0x0147
	SDPS:	 MX28		 0x15a2	 0x004f
	SDPS:	 MX815		 0x1fc9	 0x013e
	SDPS:	 MX865		 0x1fc9	 0x0146
	SDPS:	 MX8ULP		 0x1fc9	 0x014a
	SDPS:	 MX8ULP		 0x1fc9	 0x014b
	SDPS:	 MX93		 0x1fc9	 0x014e
	SDPS:	 MX95		 0x1fc9	 0x015d
	SDP:	 MX7D		 0x15a2	 0x0076
	SDP:	 MX6Q		 0x15a2	 0x0054
	SDP:	 MX6D		 0x15a2	 0x0061
	SDP:	 MX6SL		 0x15a2	 0x0063
	SDP:	 MX6SX		 0x15a2	 0x0071
	SDP:	 MX6UL		 0x15a2	 0x007d
	SDP:	 MX6ULL		 0x15a2	 0x0080
	SDP:	 MX6SLL		 0x1fc9	 0x0128
	SDP:	 MX7ULP		 0x1fc9	 0x0126
	SDP:	 MXRT106X	 0x1fc9	 0x0135
	SDP:	 MX8MM		 0x1fc9	 0x0134
	SDP:	 MX8MQ		 0x1fc9	 0x012b
	SDPU:	 SPL		 0x0525	 0xb4a4	 [0x0000..0x04ff]
	SDPV:	 SPL1		 0x0525	 0xb4a4	 [0x0500..0x9998]
	SDPV:	 SPL1		 0x1fc9	 0x0151	 [0x0500..0x9998]
	SDPU:	 SPL		 0x0525	 0xb4a4	 [0x9999..0x9999]
	SDPU:	 SPL		 0x3016	 0x1001	 [0x0000..0x04ff]
	SDPV:	 SPL1		 0x3016	 0x1001	 [0x0500..0x9998]
	FBK:	 		 0x066f	 0x9afe
	FBK:	 		 0x066f	 0x9bff
	FBK:	 		 0x1fc9	 0x0153
	FB:	 		 0x0525	 0xa4a5
	FB:	 		 0x18d1	 0x0d02
	FB:	 		 0x3016	 0x0001
	FB:	 		 0x1fc9	 0x0152
	FB:	 		 0x0483	 0x0afb

Run built-in script:
 
uuu_version 1.2.39

# @_flash.bin            | bootloader
# @_image   [_flash.bin] | image burn to emmc, default is the same as bootloader

# This command will be run when i.MX6/7 i.MX8MM, i.MX8MQ
SDP: boot -f imx-boot-imx8mmevk-sd.bin-flash_evk

# This command will be run when ROM support stream mode
# i.MX8QXP, i.MX8QM
SDPS: boot -f imx-boot-imx8mmevk-sd.bin-flash_evk

# These commands will be run when use SPL and will be skipped if no spl
# SDPU will be deprecated. please use SDPV instead of SDPU
# {
SDPU: delay 1000
SDPU: write -f imx-boot-imx8mmevk-sd.bin-flash_evk -offset 0x57c00
SDPU: jump
# }

# These commands will be run when use SPL and will be skipped if no spl
# if (SPL support SDPV)
# {
SDPV: delay 1000
SDPV: write -f imx-boot-imx8mmevk-sd.bin-flash_evk -skipspl
SDPV: jump
# }

FB: ucmd setenv fastboot_dev mmc
FB: ucmd setenv mmcdev ${emmc_dev}
FB: ucmd mmc dev ${emmc_dev}
FB: flash bootloader imx-boot-imx8mmevk-sd.bin-flash_evk
FB: ucmd if env exists emmc_ack; then ; else setenv emmc_ack 0; fi;
FB: ucmd mmc partconf ${emmc_dev} ${emmc_ack} 1 0
FB: Done


Wait for Known USB Device Appear...
[ 0.036614] [0000061d] libusb: debug [libusb_get_device_list]  
[ 0.036679] [0000061d] libusb: debug [libusb_get_device_descriptor]  
[ 0.036728] [0000061d] libusb: debug [libusb_get_device_descriptor]  
[ 0.036921] [0000061d] libusb: debug [libusb_get_device_descriptor]  
[ 0.036960] [0000061d] libusb: debug [libusb_get_device_descriptor]  
New USB Device Attached at 1:12
[ 0.037113] [0000061f] libusb: debug [libusb_get_device_list]  
[ 0.037141] [0000061f] libusb: debug [libusb_open] open 1.3
[ 0.037212] [0000061f] libusb: debug [usbi_add_event_source] add fd 7 events 4
1:12>Start Cmd:SDPV: delay 1000
[ 0.237066] [0000061d] libusb: debug [libusb_get_device_list]  
[ 0.437190] [0000061d] libusb: debug [libusb_get_device_list]  
[ 0.637318] [0000061d] libusb: debug [libusb_get_device_list]  
[ 0.837454] [0000061d] libusb: debug [libusb_get_device_list]  
1:12>Okay (1s)
1:12>Start Cmd:SDPV: write -f imx-boot-imx8mmevk-sd.bin-flash_evk -skipspl
[ 1.037569] [0000061d] libusb: debug [libusb_get_device_list]  
[ 1.041228] [0000061f] libusb: debug [libusb_kernel_driver_active] interface 0
[ 1.041288] [0000061f] libusb: debug [libusb_claim_interface] interface 0
[ 1.041573] [0000061f] libusb: debug [libusb_submit_transfer] transfer 0x7fa0001d78
[ 1.041593] [0000061f] libusb: debug [add_to_flying_list] arm timer for timeout in 10000ms (first in line)
[ 1.041617] [0000061f] libusb: debug [submit_bulk_transfer] need 1 urbs for new transfer with length 17
[ 1.041703] [0000061f] libusb: debug [libusb_handle_events_timeout_completed] doing our own event handling
[ 1.041718] [0000061f] libusb: debug [handle_events] event sources modified, reallocating event data
[ 1.041747] [0000061f] libusb: debug [usbi_wait_for_events] poll() 3 fds with timeout in 60000ms
[ 1.237690] [0000061d] libusb: debug [libusb_get_device_list]  
[ 1.437814] [0000061d] libusb: debug [libusb_get_device_list]  
[ 1.637927] [0000061d] libusb: debug [libusb_get_device_list]  
[ 1.838046] [0000061d] libusb: debug [libusb_get_device_list]  
[ 2.038155] [0000061d] libusb: debug [libusb_get_device_list]  
[ 2.238266] [0000061d] libusb: debug [libusb_get_device_list]  
[ 2.438381] [0000061d] libusb: debug [libusb_get_device_list]  
[ 2.638491] [0000061d] libusb: debug [libusb_get_device_list]  
[ 2.838603] [0000061d] libusb: debug [libusb_get_device_list]  
[ 3.038718] [0000061d] libusb: debug [libusb_get_device_list]  
[ 3.238828] [0000061d] libusb: debug [libusb_get_device_list]  
[ 3.438935] [0000061d] libusb: debug [libusb_get_device_list]  
[ 3.639043] [0000061d] libusb: debug [libusb_get_device_list]  
[ 3.839150] [0000061d] libusb: debug [libusb_get_device_list]  
[ 4.039257] [0000061d] libusb: debug [libusb_get_device_list]  
[ 4.239363] [0000061d] libusb: debug [libusb_get_device_list]  
[ 4.439469] [0000061d] libusb: debug [libusb_get_device_list]  
[ 4.639582] [0000061d] libusb: debug [libusb_get_device_list]  
[ 4.839707] [0000061d] libusb: debug [libusb_get_device_list]  
[ 5.039848] [0000061d] libusb: debug [libusb_get_device_list]  
[ 5.240089] [0000061d] libusb: debug [libusb_get_device_list]  
[ 5.440290] [0000061d] libusb: debug [libusb_get_device_list]  
[ 5.640481] [0000061d] libusb: debug [libusb_get_device_list]  
[ 5.840658] [0000061d] libusb: debug [libusb_get_device_list]  
[ 6.040831] [0000061d] libusb: debug [libusb_get_device_list]  
[ 6.240999] [0000061d] libusb: debug [libusb_get_device_list]  
[ 6.441166] [0000061d] libusb: debug [libusb_get_device_list]  
[ 6.641337] [0000061d] libusb: debug [libusb_get_device_list]  
[ 6.841523] [0000061d] libusb: debug [libusb_get_device_list]  
[ 7.041695] [0000061d] libusb: debug [libusb_get_device_list]  
[ 7.241923] [0000061d] libusb: debug [libusb_get_device_list]  
[ 7.442154] [0000061d] libusb: debug [libusb_get_device_list]  
[ 7.642381] [0000061d] libusb: debug [libusb_get_device_list]  
[ 7.842603] [0000061d] libusb: debug [libusb_get_device_list]  
[ 8.042822] [0000061d] libusb: debug [libusb_get_device_list]  
[ 8.243048] [0000061d] libusb: debug [libusb_get_device_list]  
[ 8.443266] [0000061d] libusb: debug [libusb_get_device_list]  
[ 8.643488] [0000061d] libusb: debug [libusb_get_device_list]  
[ 8.843716] [0000061d] libusb: debug [libusb_get_device_list]  
[ 9.043943] [0000061d] libusb: debug [libusb_get_device_list]  
[ 9.244163] [0000061d] libusb: debug [libusb_get_device_list]  
[ 9.444382] [0000061d] libusb: debug [libusb_get_device_list]  
[ 9.644632] [0000061d] libusb: debug [libusb_get_device_list]  
[ 9.844853] [0000061d] libusb: debug [libusb_get_device_list]  
[10.045072] [0000061d] libusb: debug [libusb_get_device_list]  
[10.245289] [0000061d] libusb: debug [libusb_get_device_list]  
[10.445508] [0000061d] libusb: debug [libusb_get_device_list]  
[10.645730] [0000061d] libusb: debug [libusb_get_device_list]  
[10.845954] [0000061d] libusb: debug [libusb_get_device_list]  
[11.041670] [0000061f] libusb: debug [usbi_wait_for_events] poll() returned 1
[11.041737] [0000061f] libusb: debug [libusb_cancel_transfer] transfer 0x7fa0001d78
[11.042297] [0000061f] libusb: debug [arm_timer_for_next_timeout] no timeouts, disarming timer
[11.042373] [0000061f] libusb: debug [libusb_handle_events_timeout_completed] doing our own event handling
[11.042412] [0000061f] libusb: debug [usbi_wait_for_events] poll() 3 fds with timeout in 60000ms
[11.042480] [0000061f] libusb: debug [usbi_wait_for_events] poll() returned 1
[11.042537] [0000061f] libusb: debug [reap_for_handle] urb type=1 status=-2 transferred=0
[11.042600] [0000061f] libusb: debug [handle_bulk_completion] handling completion status -2 of bulk urb 1/1
[11.042639] [0000061f] libusb: debug [handle_bulk_completion] abnormal reap: urb status -2
[11.042672] [0000061f] libusb: debug [handle_bulk_completion] abnormal reap: last URB handled, reporting





[5:05](https://jucrworkspace.slack.com/archives/C04J95S90BD/p1701806711440889)
[11.042705] [0000061f] libusb: debug [usbi_handle_transfer_cancellation] detected timeout cancellation
[11.042763] [0000061f] libusb: debug [arm_timer_for_next_timeout] no timeouts, disarming timer
[11.042808] [0000061f] libusb: debug [usbi_handle_transfer_completion] transfer 0x7fa0001d78 has callback 0x7fa798cd40
[11.042845] [0000061f] libusb: debug [sync_transfer_cb] actual_length=0
[11.042919] [0000061f] libusb: debug [libusb_free_transfer] transfer 0x7fa0001d78
1:12>Fail HID(W):LIBUSB_ERROR_TIMEOUT(10.01s)
[11.043899] [0000061f] libusb: debug [libusb_close]  
[11.043956] [0000061f] libusb: debug [usbi_remove_event_source] remove fd 7


[11.147675] [0000061d] libusb: debug [libusb_exit] destroying default context
[11.147792] [0000061e] libusb: debug [linux_udev_event_thread_main] udev event thread exiting
[11.148089] [0000061d] libusb: debug [libusb_unref_device] destroy device 2.1
[11.148140] [0000061d] libusb: debug [libusb_unref_device] destroy device 1.3
[11.148176] [0000061d] libusb: debug [libusb_unref_device] destroy device 1.2
[11.148213] [0000061d] libusb: debug [libusb_unref_device] destroy device 1.1
[11.148249] [0000061d] libusb: debug [usbi_remove_event_source] remove fd 4
[11.148315] [0000061d] libusb: debug [usbi_remove_event_source] remove fd 3

@IrnaAP
Copy link

IrnaAP commented Dec 6, 2023

Hi, I am experiencing the same issue, any advice?

@nxpfrankli
Copy link
Contributor

I just by one pi 4. https://www.amazon.com/dp/B089ZSGF8M/ref=sspa_dk_detail_5?pd_rd_i=B089ZSGF8M&pd_rd_w=coWKu&content-id=amzn1.sym.f734d1a2-0bf9-4a26-ad34-2e1b969a5a75&pf_rd_p=f734d1a2-0bf9-4a26-ad34-2e1b969a5a75&pf_rd_r=EJN4TW1C2N9R3CVG743B&pd_rd_wg=ChEX2&pd_rd_r=3b307555-fc32-4df2-b268-c08bdc70096a&s=pc&sp_csd=d2lkZ2V0TmFtZT1zcF9kZXRhaWw&th=1

and use https://downloads.raspberrypi.com/raspios_arm64/images/raspios_arm64-2023-12-06/ image

It works wells with master of uuu

@capiman
Copy link
Contributor

capiman commented Apr 29, 2024

Perhaps worth trying out if latest version works for you...

Fix was done here:
#420

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Assignees
No one assigned
Labels
None yet
Projects
None yet
Milestone
No milestone
Development

No branches or pull requests
5 participants
@capiman @nxpfrankli @agusgonzaleznic @anfigueroa @IrnaAP