This driver was merged into the official Linux kernel in 4.20 (see update 2018-12-15 below). If uname -srm shows 4.20 or greater, you already have this driver installed and likely have no use for the driver in this repo.
Installed today Xubuntu 19.04 and the pressure problem was back. I had to add the following file:
/usr/share/X11/xorg.conf.d/90-magictrackpad.conf
Section "InputClass"
Identifier "Touchpads"
Driver "libinput"
MatchProduct "Apple Inc. Magic Trackpad 2"
MatchDevicePath "/dev/input/event*"
EndSection
To pair via Bluetooth disconnect from USB, then turn it off and on again and you will find it when you search for devices.
Tried today the beta of Ubuntu 19.04 with Kernel 5.0 and the Magic Trackpad 2 works out of the box. No quirks needed.
As the pressure offsets have been removed from the official release, the driver needs a libinput quirks file. schmunk42 suggested the following quirks file in his comment torvalds/linux#332 (comment):
/etc/libinput/local-overrides.quirks
[Touchpad touch override]
MatchUdevType=touchpad
MatchName=*Magic Trackpad 2
AttrPressureRange=4:0
The driver will be included in the 4.20 release of the official linux kernel.
This means that the active development in this repository is stopped and you should use the official code for modifications.
- Thank you to everybody who helped, whether through testing or active development!
- https://github.com/bobbysue/Linux-Magic-Trackpad-2-Driver
- https://github.com/ponyfleisch/hid-magictrackpad2
- https://github.com/adam-h/Linux-Magic-Trackpad-2-Driver
This repository contains the linux hid-magicmouse driver with Magic Trackpad 2 support for Linux 4.18. For older kernels you might have to diff and backport.
The driver is tested in combination with the xf86-libinput and xf86-mtrack driver.
The driver supports bluetooth and USB. To connect the Trackpad via bluetooth, it must be clicked once after it is turned on, then the Trackpad tries to reconnect to the last paired (and trusted) connection.
Please help to test this driver and report issues.
You can just use the standard xf86-libinput driver and configure it through your Window-Manager-Settings. This driver works very well, but does not support three-finger-drag, but tap-to-drag.
An example configuration for mtrack can be found in:
usr/share/X11/xorg.conf.d/90-magictrackpad.conf
This configuration supports tap-to-click, two-finger-scroll and three-finger-drag. Though scrolling is not as smooth as with xf86-libinput. It can be used as starting point for your own configuration. Make sure, that you have xf86-input-mtrack-git installed and it gets loaded. You find more information about the options here: https://github.com/p2rkw/xf86-input-mtrack
@adam-h made a DKMS which can be used for testing:
Setup/install with:
cd scripts
sudo ./install.sh
Remove with:
sudo ./remove.sh
Or just use regular dkms commands once you've added ./linux/drivers/hid.
If the driver is not working, please make sure that the correct hid-magicmouse driver gets loaded and try the following steps:
cd linux/drivers/hid
make
sudo rmmod hid_magicmouse
sudo insmod ./hid-magicmouse.ko
tail -f ~/.local/share/xorg/Xorg.0.log
or for Ubuntu
tail -f /var/log/Xorg.0.log
Now unplug the trackpad and plug it back in, to see which driver gets loaded.