Simple DNS that's visible on both the guest and the host.
Spins up a small DNS server and redirects DNS traffic from your VMs to use it, automatically registers/deregisters IP addresseses of guests as they come up and down.
Install under Vagrant (1.1 or later):
$ vagrant plugin install landrush
Enable the plugin in your Vagrantfile:
config.landrush.enable
Bring up a machine that has a hostname set (see the Vagrantfile for an example)
$ vagrant up
And you should be able to get your hostname from your host:
$ dig -p 10053 @localhost myhost.vagrant.dev
If you shut down your guest, the entries associated with it will be removed.
Every time a VM is started, its IP address is automatically detected and a DNS record is created that maps the hostname to its IP.
If for any reason the auto-detection detects no IP address or the wrong IP address, or you want to override it, you can do like so:
config.landrush.host_ip_address = '1.2.3.4'
If you are using a multi-machine Vagrantfile, configure this inside each of your config.vm.define sections.
You can add static host entries to the DNS server in your Vagrantfile like so:
config.landrush.host 'myhost.example.com', '1.2.3.4'
This is great for overriding production services for nodes you might be testing locally. For example, perhaps you might want to override the hostname of your puppetmaster to point to a local vagrant box instead.
For your convenience, any subdomain of a DNS entry known to landrush will resolve to the same IP address as the entry. For example: given myhost.vagrant.dev -> 1.2.3.4, both foo.myhost.vagrant.dev and bar.myhost.vagrant.dev will also resolve to 1.2.3.4.
If you would like to configure your guests to be accessible from the host as subdomains of something other than the default vagrant.dev, you can use the config.landrush.tld option in your Vagrantfile like so:
config.landrush.tld = 'vm'
Note that from the host, you will only be able to access subdomains of your configured TLD by default- so wildcard subdomains only apply to that space. For the guest, wildcard subdomains work for anything.
Any DNS queries that do not match will be passed through to an upstream DNS server, so this will be able to serve as the one-stop shop for your guests' DNS needs.
If you would like to configure your own upstream servers, add upstream entries to your Vagrantfile like so:
config.landrush.upstream '10.1.1.10'
# Set the port to 1001
config.landrush.upstream '10.1.2.10', 1001
# If your upstream is TCP only for some strange reason
config.landrush.upstream '10.1.3.10', 1001, :tcp
Linux guests should automatically have their DNS traffic redirected via iptables rules to the Landrush DNS server. File an issue if this does not work for you.
To disable this functionality:
config.landrush.guest_redirect_dns = false
You may want to do this if you are already proxying all your DNS requests through your host (e.g. using VirtualBox's natdnshostresolver1 option) and you have DNS servers that you can easily set as upstreams in the daemon (e.g. DNS requests that go through the host's VPN connection).
If you're on an OS X host, we use a nice trick to unobtrusively add a secondary DNS server only for specific domains.
Similar behavior can be achieved on Linux hosts with dnsmasq. You can integrate Landrush with dnsmasq on Ubuntu like so (tested on Ubuntu 13.10):
sudo apt-get install -y resolvconf dnsmasq
sudo sh -c 'echo "server=/vagrant.dev/127.0.0.1#10053" > /etc/dnsmasq.d/vagrant-landrush'
sudo service dnsmasq restart
If you use a TLD other than the default vagrant.dev, replace the TLD in the above instructions accordingly. Please be aware that anything ending in '.local' as TLD will not work because the avahi daemon reserves this TLD for its own uses.
Check out vagrant landrush for additional commands to monitor the DNS server daemon.
This project could use your feedback and help! Please don't hesitate to open issues or submit pull requests. NO HESITATION IS ALLOWED. NONE WHATSOEVER.