8.3 filename format does not supported trough wifi upload

[pagabee]

Did you test the latest bugfix-2.0.x code?

Yes, and the problem still exists.

Bug Description

If you copy a gcode file trough wifi and if its name is 5 or more characters long the copied filename on SD card will be xxxxx~1.gco.
This is not a 8.3 filename format.

The checking of the lengt of the filename happens in the wifi_module.ccp
static bool longName2DosName(const char *longName, char *dosName)

if (i >= 5) {
  strcat_P(dosName, PSTR("~1.GCO"));
  return dosName[0] != '\0';
}

What is the reason for this?

Bug Timeline

Old bug

Expected behavior

8.3 filename support

Actual behavior

qwer.gco --> qwer.gco

qwert.gco --> qwert~1.gco

qwertz.gco --> qwert~1.gco

qwertzu.gco --> qwert~1.gco

qwertzui.gco --> qwert~1.gco

qwertzuio.gco --> qwert~1.gco

Steps to Reproduce

Please upload a file trough wifi to the SD card.
I'm currently using ESP3D 3.0 and tested it with the MksWifi.bin firmware.

Version of Marlin Firmware

02000902

Printer model

No response

Electronics

MKS Robin Nano V3

Add-ons

MKS TS35 Display + MKS WIFI modul

Bed Leveling

No response

Your Slicer

No response

Host Software

No response

Additional information & file uploads

[pagabee]

I modified the code:

if (i > 8) {
  dosName[6] = '\0';
  dosName[7] = '\0';
  dosName[8] = '\0';
  strcat_P(dosName, PSTR("~1.GCO"));
  return dosName[0] != '\0';
}

It works, but i don't know if it's correct.

[MKS-hosiey]

The character limit of the display interface, currently only so many characters can be displayed

[pagabee]

I copied directly files with long name to the SD card.
The TS35 display shows maximum 12 characters after that comes the ~.

[pagabee]

Hello, I modified the code to this. Please search for the “~1.GCO” in the wifi_module.ccp file. There is link in the bug description. snow79 ***@***.***> (időpont: 2022. máj. 19., Cs, 19:52) ezt írta:

…

I modified the code: if (i > 8) { dosName[6] = '\0'; dosName[7] = '\0'; dosName[8] = '\0'; strcat_P(dosName, PSTR("~1.GCO")); return dosName[0] != '\0'; } It works, but i don't know if it's correct. Where you have find this code??? — Reply to this email directly, view it on GitHub <#315 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ATVGG2E2EB3X3RH54TEU2ITVKZ5ULANCNFSM5P5YLO4A> . You are receiving this because you authored the thread.Message ID: <makerbase-mks/Mks-Robin-Nano-Marlin2.0-Firmware/issues/315/1132012780@ github.com>

[snow79]

Hello, I modified the code to this. Please search for the “~1.GCO” in the wifi_module.ccp file. There is link in the bug description. snow79 @.***> (időpont: 2022. máj. 19., Cs, 19:52) ezt írta:
…
I modified the code: if (i > 8) { dosName[6] = '\0'; dosName[7] = '\0'; dosName[8] = '\0'; strcat_P(dosName, PSTR("~1.GCO")); return dosName[0] != '\0'; } It works, but i don't know if it's correct. Where you have find this code??? — Reply to this email directly, view it on GitHub <#315 (comment)>, or unsubscribe https://github.com/notifications/unsubscribe-auth/ATVGG2E2EB3X3RH54TEU2ITVKZ5ULANCNFSM5P5YLO4A . You are receiving this because you authored the thread.Message ID: </issues/315/1132012780@ github.com>

yes but... you have solved or not???
i try with your solution, but the problem presist... now it's not 5 char but 8 ....

[pagabee]

Hello, my goal was the dos 8.3 file name format because I use the ESP Wifi modul with the ESP3D 3.0 firmware and it support max 8 characters. snow79 ***@***.***> (időpont: 2022. jún. 1., Sze, 14:24) ezt írta:

…

Hello, I modified the code to this. Please search for the “~1.GCO” in the wifi_module.ccp file. There is link in the bug description. snow79 *@*.***> (időpont: 2022. máj. 19., Cs, 19:52) ezt írta: … <#m_7848904293735048411_> I modified the code: if (i > 8) { dosName[6] = '\0'; dosName[7] = '\0'; dosName[8] = '\0'; strcat_P(dosName, PSTR("~1.GCO")); return dosName[0] != '\0'; } It works, but i don't know if it's correct. Where you have find this code??? — Reply to this email directly, view it on GitHub <#315 (comment) <#315 (comment)>>, or unsubscribe https://github.com/notifications/unsubscribe-auth/ATVGG2E2EB3X3RH54TEU2ITVKZ5ULANCNFSM5P5YLO4A . You are receiving this because you authored the thread.Message ID: < /issues/315 <#315> /1132012780@ github.com> yes but... you have solved or not??? i try with your solution, but the problem presist... now it's not 5 char but 8 .... — Reply to this email directly, view it on GitHub <#315 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ATVGG2H4YTUJOSO3YEGA5E3VM5I63ANCNFSM5P5YLO4A> . You are receiving this because you authored the thread.Message ID: <makerbase-mks/Mks-Robin-Nano-Marlin2.0-Firmware/issues/315/1143540026@ github.com>