From 2d5c9905a868273c4530aa5de950dd496660a0c5 Mon Sep 17 00:00:00 2001 From: Jan Schlieper <42387407+macsleep@users.noreply.github.com> Date: Thu, 23 May 2024 17:55:33 +0200 Subject: [PATCH] arduino micro --- Readme.md | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/Readme.md b/Readme.md index 6890451..c34e8cb 100644 --- a/Readme.md +++ b/Readme.md @@ -31,7 +31,16 @@ Ever wanted to use a FrSky Taranis wirelessly with PC simulators like [FPVFreeri If you don't want to build the software yourself just download the Gamepad.hex.save file and load it onto the Teensy using: `teensy_loader_cli --mcu=atmega32u4 -w -v Gamepad.hex.save` +## Alternative Build + +Here are a few tips for adjusting the build to an [Arduino Micro](https://store.arduino.cc/products/arduino-micro) (original or clone). You will need [avrdude](https://www.nongnu.org/avrdude/) to program the Micro. + +* edit the Makefile and change the BOARD variable from TEENSY to MICRO +* execute `make avrdude AVRDUDE_PROGRAMMER=avr109 AVRDUDE_PORT=` to download the hex file to the attached Micro + +Replace `` with the device name the Micro is connected to on your computer after resetting. Depending on the bootloader installed on your Micro you might have to change AVRDUDE_PROGRAMMER value from avr109 to arduino. + ## Usage Create a new model for the S.BUS gamepad on your transmitter. Make sure that you enable at least 4 channels (e.g. ailerons, elevator, throttle and rudder) for the receiver. Bind the receiver like you normally would. Use software like [HTML5 Gamepad Tester](http://html5gamepad.com/) to test the S.BUS gamepad. Once you have confirmed operation start your favorite simulator and enjoy. -Date: 2023-11-17 +Date: 2024-05-20