From c2482d089e955df9ca5d1d06dc228f158b2267fd Mon Sep 17 00:00:00 2001 From: tguillemLSST Date: Fri, 13 Dec 2024 07:16:09 -0800 Subject: [PATCH] up --- sections/biasStability.rst | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sections/biasStability.rst b/sections/biasStability.rst index ddda18e..564f51b 100644 --- a/sections/biasStability.rst +++ b/sections/biasStability.rst @@ -13,7 +13,7 @@ For the baseline acquisition configuration (see conclusion), three relevant stab #. Run E2236 : 50 15-s darks, 50 biases recorded with 30-s delays between exposures #. Run E2330 : 15-s and 30-s darks with variables delays between exposures -To process these runs, the eo_pipe bias stability task is used : for the ISR part, a serial ('mean_per_row') overscan correction and a bias subtraction (computed from the corresponding B-protocol run) are applied. The final data product is the mean of the per-amplifier science image over the full set of exposures of the run. Two typical examples are shown in the figures below. For the stable case, the variations are typically at the 0.1 ADU level ; in the instable case, the variations go up to 4 ADUs. +To process these runs, the eo_pipe bias stability task is used : for the ISR part, a serial ('mean_per_row') overscan correction and a bias subtraction (computed from the corresponding B-protocol run) are applied. The final data product is the mean of the per-amplifier science image over the full set of exposures of the run. Two typical examples from Run E2136 are shown in the figures below. For the stable case, the variations are typically at the 0.1 ADU level ; in the instable case, the variations go up to 4 ADUs. .. figure:: sections/figures/E2136_R21_S21.png