Skip to content

Latest commit

 

History

History
1091 lines (865 loc) · 43 KB

blip-0050.md

File metadata and controls

1091 lines (865 loc) · 43 KB
bLIP: 50
Title: LSPS0: LSP Spec Transport Layer
Status: Active
Author: ZmnSCPxj jxPCSnmZ <[email protected]>
Created: 2024-12-02
License: MIT

Abstract

This bLIP defines a protocol that is used for communcations between LSP nodes and their clients. To this end, it utilizes a JSON-RPC format spoken over BOLT8 peer-to-peer messages to allow clients to request services from the LSP.

Copyright

This bLIP is licensed under the MIT license.

Reference Implementation

A reference implementation of this protocol can be found as part of the lightning-liquidity crate.

Actors

The 'LSP' is the API provider, and acts as the server. The 'client' is the API consumer.

Protocol

Lightning Peer-To-Peer Transport

The Lightning Network BOLT8 specification describes the transport layer for Lightning Network peer-to-peer messages.

Lightning Network BOLT8 describes messages as having two components:

  • A 16-bit message ID (encoded in big-endian).
  • A variable-length message payload (the remainder of the message).

Access to the endpoints defined in other LSPS specifications is provided via messages using the BOLT8 protocol.

Rationale All clients and LSPs are expected to be Lightning Network participants, and need to somehow talk using the BOLT8 protocol. Thus, this does not introduce an additional dependency for the client or any LSP, the way an HTTP(S) or gRPC protocol would pull in additional dependencies.

During development of this specification, onion messages were proposed. As a client needs to connect to the LSP node and manage channels with that node anyway, and LSP nodes want to be easily contactable from IPv4, IPv6, DNS, or TorV3 contact points, the ability of onion messages to send to a remote Lightning Network node (that might not be directly contactable) was deemed unnecessary for most client-LSP communication needs.

All LSPS messages MUST use the BOLT8 message ID 37913 (lsps0_message_id).

Rationale We indicate a single message ID as this reduces the "footprint" of all LSPS specifications to only that single message ID, increasing the probability that other protocols using the Lightning BOLT8 peer-to-peer transport will be compatible with the LSPS specifications. The BOLT8 message ID 37913 is odd in order to comply with the "it's OK to be odd" rule, and is in the 32768 to 65535 range reserved for extensions of the BOLT protocol. Some implementations, such as Core Lightning, only expose odd-numbered messages to custom message handlers, while others, such as LDK, only expose 32768 and above. The message ID was otherwise selected randomly and has no special meaning.

Message Payload Format

The BOLT8 message payload contains the UTF-8 encoding of a complete JSON object.

The JSON object embedded in the message payload is defined by the JSON-RPC 2.0 protocol.

If a client or LSP receives a BOLT8 message with message ID 37913, it MUST perform the checks below. If any of these checks fail, then the incoming message has failed with a "bad message format" error.

  • The payload MUST parse as a single complete UTF-8 encoded JSON object (i.e. a JSON key-value store or dictionary), with optional leading or trailing whitespaces (space, tab, line feed, carriage return).
    • For example, "{ }" would pass this check, but "{" and "[ ]" would not.
  • The payload MUST NOT parse as more than a single complete JSON object.
    • For example, "{ } {" and " { } { }" would not pass this check.
  • The payload MUST NOT contain any 0 bytes.
  • If the client, the received payload MUST parse to a JSON object that is a JSON-RPC 2.0 response or notification object.
  • If the LSP, the received payload MUST parse to a JSON object that is a JSON-RPC 2.0 request.

In case of a "bad message format" error, the client:

  • MUST ignore the message.
  • SHOULD log this as an unusual event.
  • SHOULD NOT send further BOLT8 messages with ID 37913 to the peer on this connection session.
    • SHOULD re-attempt this on reconnection.

In case of a "bad message format" error, the LSP:

  • MUST respond with a JSON-RPC 2.0 error response with the reason "parse error" (code = -32700, id = null).
  • MUST ignore the message.
  • SHOULD log this as an unusual event.

Rationale Requiring a single complete JSON object simplifies handling of messages, so that a single message maps to a single request or response. C uses the NUL character as a string terminator and thus embedded 0 bytes may cause problems in implementations that pass the JSON string to C code. Conversely, we do not require the payload to be terminated by a 0 byte / NUL character as it is unnecessary in many modern non-C-based languages; C code can copy the buffer and append the NUL character if necessary, as the payload size is known. UTF-8 spends 1 byte per JSON representation character for characters in the ASCII range, and we expect most data sent over this protocol to fit in the ASCII range.

An LSP sending a bad message is a serious bug that affects all clients of the LSP, and presumably the LSP operator has to restart the node in order to fix the bug. Thus, clients should not re-attempt sending any requests to the LSP until the client connects to it again, as the reconnection may signal that the LSP was restarted, which may signal that the LSP has had this serious bug fixed.

The LSP acts as a JSON-RPC 2.0 server, while the client acts as a JSON-RPC 2.0 client.

Rationale JSON is a simple format that is easy to extend and is extensively supported. The Lightning Network peer-to-peer transport protocol in BOLT8 is not inherently a request-response protocol like HTTP(S) or gRPC, and JSON-RPC 2.0 describes a JSON-based protocol that builds a request-response protocol from a simple tunnel; BOLT8 message ID 37913 acts as that tunnel. JSON-RPC 2.0 is simple to implement, and this specification describes an even simpler subset of JSON-RPC 2.0. Although BOLT8 messages are limited to payloads of 65533 bytes, it is expected that both requests and responses would be far below that limit, and thus the ability to "cut" a large object across multiple messages, the use of a compression algorithm, and the use of a binary format instead of JSON, are all considered unnecessary. In particular, we expect most reasonable requests and responses to be less than 1000 bytes, and any compression would not significantly reduce the number of MTUs (generally about 1400 bytes per MTU) that lower network layers would need to transport.

Moreover, the lack of compression greatly simplifies implementation, testing, interoperability, and dependencies. Compression is potentially vulnerable to zip bombs, a short piece of compressed data that expands to several gigabytes or terabytes of uncompressed data. We would need to impose some limit on the uncompressed text, and that limit might as well be the 65533-byte limit of BOLT8 message payloads.

The client:

  • MUST send single complete JSON-RPC 2.0 request objects, UTF-8-encoded, as payloads for BOLT8 message ID 37913.
  • MUST NOT send JSON-RPC 2.0 notification objects (i.e. every object it sends must have an id field).
  • MUST NOT use by-position parameter structures, and MUST use by-name parameter structures.
  • MUST NOT batch multiple JSON-RPC 2.0 request objects in an array as described in the "Batch" section of the JSON-RPC 2.0 specification.

Rationale By disallowing by-position parameter structures, other LSPS specifications need only to define parameter names and not some canonical order of parameters for by-position use. Having to handle only by-name parameter structures also simplifies the LSP code, as it does not have to check whether the params value is an array or a dictionary, and to separately map array elements to params keys. Batched requests require batched responses according to JSON-RPC 2.0, and it may be simpler for LSPs to handle unrelated LSPS methods separately without requiring re-batching of the responses; it gives a simple "one message is one request / response" rule.

The LSP:

  • MUST send either of the below as payloads for BOLT8 message ID 37913:
    • a single complete JSON-RPC 2.0 response object, UTF-8-encoded.
    • a single complete JSON-RPC 2.0 notification object (i.e. an object without id but with method, params, and jsonrpc fields).
      • MUST use by-name parameter structures for notifications.
  • MUST respect the JSON-RPC 2.0 standard error codes.
  • SHOULD NOT send BOLT8 message ID 37913 unless the peer had already sent a BOLT8 message ID 37913, possibly in a past connection session.
  • MAY send responses in an order different from the order in which the client sent the requests.

Rationale The peer sending BOLT8 message ID 37913 is an indicator that it understands the LSPS0 protocol and wishes to act as a client. If the peer does not send it, then it is not an LSPS client and the LSP has no reason to send BOLT8 message ID 37913. Notifications allow the LSP to signal events to the client, provided the client has already previously signalled a willingness to receive such events by calling some LSPS-defined method to enable such events. For example, an LSPS might specify a method that enables the client to be signalled by an LSPS-specified notification, whenever the client could have received a payment but lacks the inbound liquidity for it.

LSPS Method And Notification Specifications

Other LSPS specifications:

  • MUST indicate method names for each client-callable API endpoint and each LSP-initiated notification, as well as the key names of the params for each method, and the meanings of each parameter.
    • method names MUST be in snake_case, i.e. words are lower case and separated by _ characters.
    • MUST prefix method names with lsps followed by the LSPS number followed by ., e.g. lsps999.do_this for a client request or lsps999.that_happened for an LSP notification.
    • MUST also describe the possible error codes for each API endpoint, together with any data (which MUST be an object (dictionary)) for that error code, if there should be a data field.
      • MAY elect to not define a data object for an error code, in which case clients MUST NOT expect a data field.
    • MUST define result values for its API endpoints that are objects (dictionaries), and MUST define keys of the response.

Rationale A prefix ensures that method names do not conflict across LSPS specifications, and creates a convention that allows non-standard extensions to define their own prefix. A result dictionary allows for later revisions of an LSPS specification to seamlessly add new keys in the response.

An LSP MAY return additional keys in the response values that are not defined in the relevant LSPS specification. Clients conversely MUST ignore unrecognized keys.

Rationale This allows later revisions of an LSPS specification to seamlessly add new keys to the response while maintaining backwards compatibility with older clients that do not know the later revision with additional keys. Later revisions can make parameters backwards compatible by only adding optional new parameters, which when absent causes the API endpoint to behave identically to older revisions.

Other LSPS specifications MUST be designed to be resilient against responses and notifications being lost on the way from LSP to client. The LSP may believe it has delivered the message, but the IP packet containing the message may not have reached the client before the client suffers some unexpected crash, or the client may have been parsing and doing early processing of the message before being able to persist the data related to the response or notification. Other LSPS specifications MUST:

  • require that the LSP time-bound any information that the LSP has to keep before the LSP is compensated.
  • require or support that the client store as much state as possible, and include some kind of signature or MAC that the LSP can use to recognize that it issued that state, without the LSP having to remember that state.
  • describe level-triggered and not edge-triggered notifications (i.e. notifications should mean "client, you still have some X you have to handle" and not "client, a new X was added / an X was removed / an X was changed").
  • require that LSPs MUST send notifications whenever a change occurs in the items the client has to handle (send on edge), but also send notifications on connecting with the client if the level-trigger is still true on reconnection (i.e. also check the level on reconnection and re-send it).
  • describe any queues (i.e. for items the client has to handle, such as HTLCs that cannot be delivered to the client via the normal BOLT messages yet, due to lack of a viable channel) as having separate "peek at first item" and "remove first item then peek at next item" APIs, while ensuring that each item in a queue has a unique identifier that the client can use to check if the item has already been read but the "remove first item" call for that item was not able to be delivered previously.

Rationale Clients may crash due to operator mistakes or unrelated reasons, and a client may be an attacker and not a legitimate paying client. Thus, a client may initiate some flow or process that requires multiple communication rounds with the LSP, and then abort partway through due to a crash or a deliberate attempt to waste LSP resources. The network between the client and the LSP may also be unreliable, so notifications may be lost, so the state of whatever is being notified should be re-sent on reconnection. In particular, notifications are not ever explicitly acknowledged by the client on the transport layer level. Queues are particularly good for level-triggered notification, with the "level" being "is the queue not empty?". Processing of one item in this queue can take time on the client side, during which the client may crash or the connection interrupted, thus the first item should be retained on the LSP side, as the client may not have been able to persist it after it received the response from the "peek at first item" call. The client needs to be able to detect if it already completed processing of the queue top item, and combining the "remove first item then peek at next item" into a single call reduces the round trips needed to handle each completely-processed item while still retaining the item currently being processed on the LSP side in case of a client crash during processing.

Error Handling

In general, the client, the LSP, and any LSPS building on top of LSPS0 MUST respect JSON-RPC error codes. This document extends the error codes by describing edge cases combining JSON-RPC 2.0 with BOLT8. Any error code like -32603 Internal error is still valid even though not mentioned explicitly.


JSON-RPC 2.0 errors include a message field which is a human-readable error message.

Clients MUST carefully filter error messages of possibly problematic characters, such as NUL characters, <, newlines, or ASCII control characters, which may cause problems when displaying in a dynamic context such as an HTML webpage, a TTY, or C string processing functions.

Clients SHOULD NOT directly expose error messages to users unless users have enabled some kind of "advanced" mode or "developer" mode. Clients MAY write them in a log that is accessible to "advanced" or "developer" mode users.

Clients SHOULD generate their own messages based on the error code, for display to the user, possibly integrating information in the optional data object if the error code defines it. If the client does not recognize the error code, or is expecting a field in the data object that is not present, it SHOULD indicate this as an "unrecognized" error to the user.

Rationale LSPs might write incorrect or misleading human-readable error messages, and users might report such error messages as bugs to the client developers, since the user-visible source of the error message would be the client; it is thus better if the client writes its own error messages that it can change based on user feedback. Later revisions of some LSPS spec may introduce new error codes, or the specification may be incomplete and actual development shows that some unspecified error could possibly occur, in which case the human-readable error field could contain a description of this error, which developers of clients can then use to help guide the evolution of the specification, or to comply with later revisions of the LSPS spec.

-32602 Invalid Parameters Error

An LSP that sends back an invalid parameter error with code = -32602 MUST include a data object in the error response.

This data object MUST contain at least the field unrecognized, a JSON array of strings, representing an unordered set of parameter names. These are the parameter names that are not recognized by the LSP as valid for the RPC method.

For example, suppose the client sent this request:

{
  "jsonrpc": "2.0",
  "method": "example.method_name",
  "params": {
    "future_feature1_param": "value1",
    "future_feature2_param": "value2"
  },
  "id": "42"
}

Suppose the LSP recognizes example.method_name as a valid method, and recognizes future_feature2_param as a valid parameter of that method, but does not recognize future_feature1_param. In that case, the LSP would respond with:

{
  "jsonrpc": "2.0",
  "error": {
    "code": -32602,
    "message": "Invalid params",
    "data": {
      "unrecognized": ["future_feature1_param"]
    }
  },
  "id": "42"
}

Rationale Suppose there exists some other LSPS. Suppose some future revision(s) of this LSPS includes (in whatever order) two additional parameters, future_feature1_param and future_feature2_param. If a client sends a request that includes future_feature1_param and future_feature2_param, and the LSP does not support one or both of them, the LSP would return an "Invalid params" -32602 error. However, without the unrecognized field in the data object, the client cannot know if the LSP does not support future_feature1_param, future_feature2_param, or both.

Custom Errors

JSON-RPC 2.0 protocol defines the range of -31999 to +32767 (inclusive) to be application defined errors. Each LSPS is provided and MUST use an error range of max 100 error codes. The range for each LSPS is calculated as follow: LSPS-number * 100 to LSPS-number * 100 + 99 (inclusive).

For example:

  • LSPS0: 00000 to 00099
  • LSPS1: 00100 to 00199
  • LSPS2: 00200 to 00299

And so on until +32699. The range of -31999 to -1 (inclusive) is undefined and MAY be used by applications outside of the LSPSpec. Such applications MAY request the spec group to register an error code range to avoid collision.

As per JSON-RPC 2.0, the range between -32000 to -32099 is "reserved for implementation-defined server-errors". These error codes MAY be used by LSPs too. Clients MUST treat an error in this range similar to a -32603 Internal error if it does not know otherwise.

Disconnection Handling

Networks are unreliable, and network participants are also unreliable.

Clients MUST use a high-entropy id string for JSON-RPC 2.0 requests, such as a UUID, or a hex encoding of a random binary blob of at least 80 bits, with randomness acquired from a cryptographically secure source. Clients MUST NOT use just a simple incrementing counter for the id.

If a client receives a JSON-RPC 2.0 response with an id it does not remember sending a request for, it MUST ignore that response.

Rationale Clients, LSPs, and the network between them can individually be unreliable, leading to clients that forget ids they issued previously, or clients or LSPs thinking that the other side may have restarted when it is the network between them that failed. Thus, random ids picked from a large space are the safest when the client might lose any counter state (by crashing if using an in-memory counter, or loss of persistent storage on hardware without storage redundancy), and are resilient against reconnections when both sides remained running.

Clients MAY include additional information in their id for internal tracking, as long as the total id has sufficient entropy for universal uniqueness.

Clients SHOULD internally impose a reasonable timeout, on the scale of minutes, for receiving a response for a request, and SHOULD treat a timeout event as a temporary server failure, and forget the id of the timed-out request.

Rationale The LSP might crash between the time the client makes the request to the time it could complete processing of the response, and thus lost track of the request.

If the LSP is unable to deliver a response to the client due to a disconnection, it SHOULD treat this no differently from successfully delivering the response but the client then does not "follow up" on any action after that.

Rationale Even if the LSP delivers the response to the client, the client could then crash while processing the response, which means that the LSP cannot be sure that any response is received by the client anyway.

Lightning Feature Bit

The BOLT7 specification describes the node_announcement gossip message, which includes a features bit field. The BOLT1 specification describes the init message, which also includes a features bit field.

LSPs MAY set the features bit numbered 729 (option_supports_lsps) in both the init message on connection establishment, and in their own advertised node_announcement. Clients MUST NOT set features bit numbered 729 in either context.

Rationale Because all communication is initiated through clients sending BOLT-8 messages only servers need to advertise themselves. Servers can choose to advertise themselves using feature bit 729. Clients can discover LSP's by downloading gossip and inspecting the channel-graph. The bit 729 was chosen randomly and has no special meaning.

LSPs MAY set the features bit 729 option_supports_lsps if it supports at least LSPS0, and MAY set the features bit even if it does not support some of the LSPS specifications.

Rationale This specification also describes a lsps0.list_protocols API which the LSP uses to report exactly which LSPS specifications it supports.

LSPS Specification Support Query

The client can determine if an LSP supports a particular LSPS specification other than LSPS0 via the method named lsps0.list_protocols, which accepts no parameters {}.

lsps0.list_protocols has no errors defined.

The response datum is an object like the below:

{
  "protocols": [1, 3]
}

protocols is an array of numbers, indicating the LSPS specification number for the LSPS specification the LSP supports. LSPs do not advertise LSPS0 support and 0 MUST NOT appear in the protocols array.

Rationale LSPS0 support is advertised via features bit 729 already, so specifying 0 here is redundant.

Non-normative The example below would not be necessary for other LSPS specifications, but gives an idea of how the JSON-RPC 2.0 protocol would look like, when using this API endpoint.

As a concrete example, a client might send the JSON object below inside a BOLT8 message ID 37913 in order to query what LSPS protocols the LSP supports:

{
  "method": "lsps0.list_protocols",
  "jsonrpc": "2.0",
  "id": "example#3cad6a54d302edba4c9ade2f7ffac098",
  "params": {}
}

The LSP could then respond with a BOLT8 message ID 37913 with the following payload, indicating it supports LSPS1 and LSPS3 (in addition to LSPS0):

{
  "jsonrpc": "2.0",
  "id": "example#3cad6a54d302edba4c9ade2f7ffac098",
  "result": {
    "protocols": [1, 3],
    "example-undefined-key-that-clients-should-ignore": true
  }
}

LSPS Extension And Versioning

Individual LSPS SHOULD NOT include their own explicit versioning scheme.

An individual LSPS MAY be revised to a later revision. Later revisions of an individual LSPS MUST NOT break compatibility with earlier revisions.

If there is a need for a change that breaks compatibility with an existing revision of an LSPS, then a new LSPS with a different LSPS number MUST be used.

Later revisions of an LSPS MAY, if a new need arises:

  • Add new optional params fields for a client-callable API method.
    • If the optional parameter is not specified, the method MUST act the same as in previous revision of the LSPS, before the parameter existed.
  • Add new required or optional result fields for a client-callable API method.
    • Provided that the client is free to ignore the added fields and that acceptance of a new result field is signalled by using a new optional params field of some client-callable API method, or by calling a new client-callable API method, or by some other method, and that a lack of signal of acceptance of the new field results in behaving the same as in older revisions. (Rationale Older clients WILL ignore unknown fields and thus would not be aware of them)
    • Allowed recursively for any field that itself contains a dictionary (i.e. a result field may contain a dictionary, and a new revision of an LSPS may define a new field for that dictionary) to any depth of dictionary fields, provided the previous provision is followed.
  • Add new error codes for a client-callable API method.
  • Add completely new client-callable API methods.
  • Add completely new LSP-initiated notification methods, provided they are enabled only by a new optional field in some client-callable API method or by a completely new client-callable API method.

Later revisions of an LSPS MUST NOT make changes beyond the above.

A client:

  • MUST ignore unrecognized result fields from the result of a client-callable API method.
    • MUST recursively ignore unrecognized fields from any dictionaries in a recognized result field, to any depth.
  • MUST treat as a generic error any unrecognized error code from an error result for a client-callable API method.
    • SHOULD log this as unusual.
  • MUST ignore unrecognized LSP-initiated notification methods.
    • SHOULD log this as unusual.

An LSP MUST:

  • Respond with a -32602 "Invalid params" error, described in a previous section with unrecognized field in the data dictionary, if it receives a client-callable API method it recognized, but with an unrecognized parameter.
  • Respond with a -32601 "Method not found" error, if it receives a request to call a client-callable API method that it does not recognize.

If the client supports an older revision of an LSPS, it simply does not provide any new optional parameters to existing client-callable API methods, or any new client-callable API methods. Then the interface would act the same as in the older revision.

If a client wants to use a newer revision of an LSPS, it can look for some new result field, and if that does not exist, it knows the LSP supports an older revision of the LSPS. The client can provide any new optional parameters it wants to use, and if the LSP responds with a -32602 "Invalid params" error, that error includes an unrecognized field, described above, that contains the parameters that the LSP does not supoort. The client can use a new client-callable API method, and if the LSP responds with a -32601 "Method not found" error, knows that the LSP does not support that method.

Vendor-specific extensions to an LSPS can also obey the above rules, and would remain compatible with a non-vendor LSP and a non-vendor client.

Common Schemas

This section describes how particular Lightning and LSPS-specific types are encoded into a JSON format, so that other LSPS specifications need only refer to this document without having to repeat this over and over again.

Here are a few facts about JSON:

  • JSON numbers are technically supposed to be IEEE 754 Double Precision floating-point numbers. These numbers have 53-bit mantissas; if a number would require more than 53 bits of significant binary digits to represent, then IEEE Double Precision numbers will lose accuracy.
    • Even so, as a text representation, there may be numbers that can be accurately represented in IEEE 754 but which will require a very long decimal string representation, which common JSON printers are likely to truncate.
    • Some short decimal string representations may not be accurately represented as IEEE 754 Double Precision numbers, too.
  • Many JSON parsers will separate floating-point and integer numbers, based on whether a . character exists in a number. Most of these will use signed 32-bit integers for parsed integral numbers.

When a schema specifies a JSON string format, characters that can be embedded into a JSON string without escapes MUST be encoded directly. For example, even though the JSON strings "A" and "\u0041" are equivalent encodings of the same string, only "A" would be allowed under this specification.

Rationale Using alternative ways of expressing the same characters will both increase the size of the string and make the string less readable to humans, to no advantage.

Monetary Amounts

Link: LSPS0.sat
Link: LSPS0.msat

Monetary amounts MUST be expressed in either millisatoshi or satoshi units.

Other LSPS specifications MUST add a suffix to object field keys whose value is a monetary amount:

  • _msat for monetary amounts in millisatoshi units.
  • _sat for monetary amounts in satoshi units.

Rationale In some contexts, such as on-chain amounts like channel capacities, it is impossible to use sub-satoshi amounts, so using millisatoshi units for those is pointless. On the other hand, in many contexts Lightning uses millisatoshi amounts. An explicit suffix in field names helps ensure that developers do not confuse the two units.

Using larger units may require writing numbers out as a decimal string representation with ., which might lose accuracy during conversion from text to an IEEE 754 number or vice-versa.

Monetary amounts MUST be encoded as JSON strings containing the decimal text representation of the number of millisatoshis or satoshis. LSPS implementations SHOULD internally use an unsigned 64-bit number to represent amounts.

Rationale The maximum number of millisatoshis on the Bitcoin blockchain would require 63 significant bits. A JSON integral number might be parsed into only a 32-bit representation, or an actual IEEE 754 floating-point number with only 53 bits of mantissa.

For example, the Bitcoin dust limit of 546 satoshis would be encoded as "546000" for an _msat-suffixed field, or "546" for a _sat-suffixed field.

On-chain Feerates

Link: LSPS0.onchain_fee_rate

On-chain feerates MUST be expressed in units of millisatoshi per weight unit, or equivalently, satoshi per 1000 weight units (sats/kWU).

The minimum feerate when using satoshi per 1000 weight units is 253sat/kWU, or approximately 1.0sat/vbyte.

On-chain feerates MUST be encoded as JSON integral numbers.

For example, the minimum feerate would be encoded as 253.

Proportional / Parts-per-million

Link: LSPS0.ppm

Proportional numbers (i.e. anything that humans might typically express as a percentage) MUST be expressed in units of parts-per-million.

Parts-per-million units MUST be encoded as JSON integral numbers.

For example, 0.25% would be encoded as 2500.

Rationale This is its own type so that fractions can be expressed using this type, instead of as a floating-point type which might lose accuracy when serialized into text. This is effectively a fixed-point number format. Using parts-per-million gives granularity smaller than a percentage does. Lightning Network BOLT specifications already use the parts-per-million unit for proportional channel feerates.

We expect that proportional amounts would be smaller than 100% or 1.0, which would be encoded as the JSON integral number 1000000, which is small enough to easily fit into IEEE 754 numbers or 32-bit signed integers with no loss of significant bits.

Short Channel Identifiers (SCID)

Link: LSPS0.scid

SCIDs MUST be encoded as a JSON string containing the "human-readable" format of BBBxTTTxOOO, as defined in BOLT7 Definition of short_channel_id.

BBB is the top 24 bits in decimal text. TTT is the middle 24 bits in decimal text. OOO is the lowest 16 bits in decimal text. x are literal lowercase x characters.

For example, an SCID which would be hex-dumped as the binary blob 083a8400034d0001 when encoded in a typical BOLT binary encoding, would be written as the JSON string "539268x845x1".

Rationale This format is a recognizable and distinctive format for SCIDs, and helps separate the SCID type from other types.

SECP256K1 Points / Public Keys / Lightning Network Node IDs

Link: LSPS0.pubkey

Lightning Network node IDs are SECP256K1 ECC public keys, which are points on the SECP256K1 elliptic curve, as noted in BOLT8.

SECP256K1 elliptic curve points MUST be encoded as a JSON string of the hexadecimal dump of the compressed DER encoding of the point.

The compressed DER encoding is a 33-byte representation, and the JSON string hexadecimal dump would therefore be encoded as 66 characters (hexadecimal digits). The first byte is either the byte 0x02 for an even Y coordinate, or 0x03 for an odd Y coordinate, while the rest of the bytes is the big-endian 32-byte integer representation of the X coordinate.

In contexts where the case is significant (for example, if it will be committed to by some hash or signature) then the representation MUST be in lowercase. Otherwise, readers MUST allow both lowercase and uppercase hexadecimal digits.

Readers SHOULD validate that the point is indeed on the SECP256K1 curve.

For example, the SECP256K1 generator point G would be written as the JSON string "0279be667ef9dcbbac55a06295ce870b07029bfcdb2dce28d959f2815b16f81798".

Rationale Bitcoin and Lightning have standardized on this format, and traditionally used lowercase for hexadecimal digits.

Lightning Network Connection Strings

Link: LSPS0.connection_string

Lightning Network connection strings describe a Lightning Network Node ID and one way to connect to that node.

Connection strings MUST be encoded as a JSON string, with three parts:

  1. The Lightning Network Node ID, encoded as the hexadecimal dump of the compressed DER encoding, followed by the @ sign.
  2. The address, which follows the @ sign and lasts to the last : in the string. Address formats allowed are those defined in the BOLT specifications:
  3. A port number, which is started by the last : in the string, and is a decimal text representation of the number.

For example, a node with ID 0279be667ef9dcbbac55a06295ce870b07029bfcdb2dce28d959f2815b16f81798 on an IPv6 localhost listening on the default port 9735 might be expressed as the JSON string: "0279be667ef9dcbbac55a06295ce870b07029bfcdb2dce28d959f2815b16f81798@::1:9735"

A reader SHOULD extract the node ID as the part of the string until the first @ character, and the port number as the part of the string from the last : character to the end of the string, and the address as between the first @ to the last :, then individually parse and validate each part.

On-chain Addresses

Link: LSPS0.onchain_address

An on-chain address MUST be a SegWit address, from version 0 to any future version.

An on-chain address MUST be encoded as a string containing the SegWit address:

  • For SegWit v0 addresses, encoded using bech32.
  • For SegWit v1 (Taproot) or later, encoded using bech32m.

Readers MUST support, and writers SHOULD only emit:

  • SegWit v0 addresses with 20 byte commitment (P2WPKH) or 32 byte commitment (P2WSH).
  • SegWit v1 addresses with 32 byte commitment (Taproot).

Readers MAY support other SegWit versions.

Lightning Network Node Signatures

Link: LSPS0.ln_signature

Signatures generated by a particular Lightning Network node, with a particular known node ID, MUST be generated and represented using the LND signmessage #specinatweet, and encoded as a JSON string containing the zbase32 encoding:

zbase32(SigRec(SHA256(SHA256("Lightning Signed Message:" + msg)))). zbase32 from https://philzimmermann.com/docs/human-oriented-base-32-encoding.txt and SigRec has first byte 31 + recovery id, followed by 64 byte sig.

Rationale This non-BOLT specification is widely immplemented and is commonly used in many bespoke protocols, often used to prove that a particular user owns a particular node, or as an informal way to reduce spam by requiring that a participant prove they have a published Lightning Network node.

CLN, LND, and Eclair all have a signmessage command that allows generation of this signature, and verification can be implemented using (Non-normative) e.g. ln-verifymessagejs.

Other LSPS specifications MUST specify that messages to be signed include the string LSPS followed by the LSPS specification number, as well as a human-readable ASCII text warning not to sign the message manually. For example, a hypothetical LSPS999 might specify:

The signature MUST sign a message with the template:

    "LSPS999: DO NOT SIGN THIS MESSAGE MANUALLY: I will make an `OP_RETURN` output with ${hash}."

Rationale signmessage is widely used in many bespoke protocols where a verifier will ask a human operator to prove they control a node by signing a specified message from the verifier. The verifier could then provide a template from an LSPS specification, hoping to get a signature that could be used in an LSPS protocol to prove something other than what the human operator expected.

Datetimes

Link: LSPS0.datetime

Particular points of time in the modern era (a "datetime") MUST be encoded as a JSON string containing the ISO 8601 format "YYYY-MM-DDThh:mm:ss.uuuZ". These are always in the UTC timezone.

Binary Blobs (Raw Transactions, PSBTs, Lightning onions, etc.)

Link: LSPS0.binary_blob

Binary blobs MUST be encoded as a JSON string containing the Base 64 encoding of the binary blob, as described in RFC 4648 Section 4.

Padding characters = MUST be used.

Rationale All characters in the RFC 4648 Section 4 Base 64 encoding can be inside a JSON string without any escapes, leading to an encoding that is only 33.33% longer than the equivalent straight binary encoding, while having reasonably simple encoding and decoding implementations.

Although padding is unnecessary, as the length of a JSON string can be determined from the " delimiters, some base64 parsers completely reject the input if you do not include the padding = characters, despite their uselessness, as this tweet laments.

Transaction IDs

Link: LSPS0.txid

Transaction ID without witness data as defined in BIP0141.

It MUST be converted to little-endian to enable searching and MUST be encoded as a 64 character HEX string.

Rationale We use the little-endian format to let users easily copy-paste the txid to a block explorer. Example:

{
  "txid": "F27C97F46ED7281A3EFA7287410082EBA0CD1424D72703A217E435EA840957B0"
}

Output Index

Link: LSPS0.output_index

output_index is the 0 based index for transaction output UTXOs. It is a maximum of 16 bits (2 bytes). It MUST be represented as a JSON integer (number).

Example:

{
  "output_index": 0
}

Outpoints

Link: LSPS0.outpoint

An outpoint consist of a LSPS0.txid and a LSPS0.output_index. It is defined in BOLT0. It MUST be encoded as a JSON string in the txid:output_index format.

Rationale The txid:outpoint format is conveniently used in block explorers and can just be copy pasted to search for the affected UTXO. Example:

{
  "funding_outpoint": "F27C97F46ED7281A3EFA7287410082EBA0CD1424D72703A217E435EA840957B0:0"
}

Error Codes

Commonly shared error codes that are used in multiple LSPS.

001 Client rejected

Link: LSPS0.client_rejected_error

A LSP MAY return a Client rejected error in case it does not want to offer a service to the client. A LSP MAY reject a client by its node_id or IP for example.

Code Message Data Description
001 Client rejected {"message": %human_message% } The LSP rejected the client.
  • %human_message% <string> A human readable message that indicates why the lsp rejected the client.
    • May simply be { "message": "Client rejected" }.