Skip to content

Latest commit

 

History

History
133 lines (97 loc) · 8.49 KB

RELEASENOTES.md

File metadata and controls

133 lines (97 loc) · 8.49 KB
Raw

Logo

RELEASE NOTES

Migration Information

This version removes support for direct migration from versions before v8.1.0 (Doris)

See migration path for instructions how to migrate to a major version. Pay attention to the following version breaks due to dynamic settings updates:

  1. Migrate to Sonoff-Tasmota 3.9.x
  2. Migrate to Sonoff-Tasmota 4.x
  3. Migrate to Sonoff-Tasmota 5.14
  4. Migrate to Sonoff-Tasmota 6.7.1 (http://ota.tasmota.com/tasmota/release-6.7.1/)
  5. Migrate to Tasmota 7.2.0 (http://ota.tasmota.com/tasmota/release-7.2.0/)

--- Major change in parameter storage layout ---

  1. Migrate to Tasmota 8.5.1 (http://ota.tasmota.com/tasmota/release-8.5.1/)

--- Major change in internal GPIO function representation ---

  1. Migrate to Tasmota 9.1 (http://ota.tasmota.com/tasmota/release-9.1.0/)

While fallback or downgrading is common practice it was never supported due to Settings additions or changes in newer releases. Starting with release v9.1.0 Imogen the internal GPIO function representation has changed in such a way that fallback is only possible to the latest GPIO configuration before installing v9.1.0.

Supported Core versions

This release will be supported from ESP8266/Arduino library Core version 2.7.4.9 due to reported security and stability issues on previous Core version. This will also support gzipped binaries.

Support of Core versions before 2.7.1 has been removed.

Support of TLS

In addition to TLS using fingerprints now also user supplied CA certs, AWS IoT and Azure IoT is supported. Read full documentation

Initial configuration tools

For initial configuration this release supports Webserver based WifiManager or Serial based command interface only. Support for WPS and SmartConfig has been removed.

Provided Binary Downloads

ESP8266 or ESP8285 based

The following binary downloads have been compiled with ESP8266/Arduino library core version 2.7.4.9.

  • tasmota.bin = The Tasmota version with most drivers for 1M+ flash. RECOMMENDED RELEASE BINARY
  • tasmota-AF.bin to tasmota-VN.bin = The Tasmota version in different languages for 1M+ flash.
  • tasmota-lite.bin = The Lite version without most drivers and sensors for 1M+ flash.
  • tasmota-knx.bin = The Knx version without some features but adds KNX support for 1M+ flash.
  • tasmota-sensors.bin = The Sensors version adds more useful sensors for 1M+ flash.
  • tasmota-ir.bin = The InfraRed Receiver and transmitter version allowing all available protocols provided by library IRremoteESP8266 but without most other features for 1M+ flash.
  • tasmota-display.bin = The Display version without Energy Monitoring but adds display support for 1M+ flash.
  • tasmota-zbbridge.bin = The dedicated Sonoff Zigbee Bridge version for 2M+ flash.
  • tasmota-zigbee.bin = The dedicated cc25xx Zigbee Bridge version for 4M+ flash.
  • tasmota-minimal.bin = The Minimal version allows intermediate OTA uploads to support larger versions and does NOT change any persistent parameter for 1M+ flash. This version should NOT be used for initial installation.

Above binaries are also available as gzipped version allowing faster uploads.

Latest released binaries can be downloaded from

Historical binaries can be downloaded from

The latter links can be used for OTA upgrades too like OtaUrl http://ota.tasmota.com/tasmota/release/tasmota.bin.gz

ESP32 based

The following binary downloads have been compiled with ESP32/Arduino library core version 1.0.6.

  • tasmota32.bin = The Tasmota version with most drivers including additional sensors and KNX for 4M+ flash. RECOMMENDED RELEASE BINARY
  • tasmota32_8M.bin = The Tasmota version with most drivers including additional sensors and KNX for 8M+ flash.
  • tasmota32_16M.bin = The Tasmota version with most drivers including additional sensors and KNX for 16M+ flash.
  • tasmota32solo1.bin = The Tasmota version with most drivers including additional sensors and KNX for single core ESP32 and 4M+ flash.
  • tasmota32-AF.bin to tasmota32-VN.bin = The Tasmota version in different languages for 4M+ flash.
  • tasmota32-ir.bin = The InfraRed Receiver and transmitter version allowing all available protocols provided by library IRremoteESP8266 but without most other features for 4M+ flash.
  • tasmota32-display.bin = The Display version without Energy Monitoring but adds display support for 4M+ flash.
  • tasmota32-webcam.bin = The Webcam version adds webcam support for 4M+ flash.
  • tasmota32-bluetooth.bin = The Bluetooth version adds BLE support for 4M+ flash.
  • tasmota32-odroidgo.bin = The Odroid-Go version is specifically tailored to Odroid_go hardware for 8M+ flash.
  • tasmota32-core2.bin = The Core2 version is specifically tailored to M5Stack Core2 hardware for 8M+ flash.

Latest released binaries can be downloaded from

Historical binaries can be downloaded from

The latter links can be used for OTA upgrades too like OtaUrl http://ota.tasmota.com/tasmota32/release/tasmota32.bin

Additional information

List of embedded modules.

Complete list of available feature and sensors.

Changelog v9.5.0.2

Added

  • Command SetOption127 1 to force Wifi in no-sleep mode even if Sleep 0 is not enabled
  • Initial support for Tasmota Mesh (TasMesh) providing node/broker communication using ESP-NOW #11939
  • Berry ESP32 partition manager #12465
  • Support for AM2320 Temperature and Humidity Sensor by Lars Wessels #12485
  • Rule event support as JSON payload #12496
  • MQTT minimum password length restriction in GUI #12553

Changed

  • ESP32 core library from v1.0.6 to v1.0.7.1
  • ESP32 Ethernet Phy Type information to IDF v3+
  • Speed up initial GUI console refresh
  • Enable UFILESYS, GUI_TRASH_FILE and GUI_EDIT_FILE for any device compiled with more than 1M flash size
  • Simplified configuration for ir-full and removal of tasmota-ircustom #12428
  • Refactor platformio #12442
  • Allow buttons to work in AP normal mode #12518
  • Enable Ping and rule features for any device compiled with more than 1M flash size #12539

Fixed

  • ESP32 core v2.0.0 setting hostname
  • ESP32-C3 settings layout for configuration backup and restore
  • DDS238-2 wrong reactive power value #12283
  • ESP32 Webcam add boundary marker before sending mjpeg image #12376
  • NO VALID JSON regression from may 4th #12440
  • Telegram response decoding stopped working after 20210621 and exception on long result message #12451
  • Neopool compile error on DEBUG_TASMOTA_SENSOR #12464
  • Berry button handlers and error messages #12521
  • Scripter and Display MQTT errors due to MQTT_DATA move to String #12525
  • Scripter moving average and sml input validation #12541
  • Zigbee Hue angle encoding #12545
  • Exception 28 when unable to send MQTT message and a topic name without a slash '/' #12555
  • Wi-Fi initial setup workaround for 11n only routers #12566

Noted

  • ESP32 single core tasmota32solo1.bin binary can only be uploaded using the GUI as OTA upload will trigger the watchdog timer