Skip to content

Latest commit

 

History

History
63 lines (40 loc) · 1.28 KB

README.md

File metadata and controls

63 lines (40 loc) · 1.28 KB
Raw

flashPiCC

Tool to flash CC253x via RaspberryPI without a debugger

This tool can be used to flash CC253x boards (and probably others) via RaspberryPI. A CC-debugger is not neccecary. WiringPI has to be installed on the PI.

Wiring:

   CC253x .............. PI (wPi)

   RESET (RST) ......... GPIO22 (Phys31)
   DATA/DD (P2.1) ...... GPIO0 (Phys11)
   CLOCK/DC (P2.2) ..... GPIO2 (Phys13)
   
   VCC ................. 3.3V (e.g. Phys1)
   GND ................. 0V/GND (e.g.Phys9)

Labeling is according to wiringPi PIN-Names.

WirinPi PINs

If you prefere different PINs on the Raspberry side, this can be changed in the code.

Compiling:

Use supplied Makefile - or manualy run C-compiler...

# gcc -o flashPiCC flashPiCC.c -lwiringPi

Flashing:

The firmware to be flashed has to be in hex-format. Flashing can be started by:

# ./flashPiCC -f firmware.hex

The CC253x is erased before the firmware is flashed.

Flashing and Verifying:

if -V is passed, the flashing is verified by coparing the written data with the original data.

# ./flashPiCC -V -f firmware.hex

Resetting:

If the CC253x needs to be resetted, this can be done with

# ./flashPiCC -r

Have Fun.