Skip to content
This repository has been archived by the owner on May 10, 2023. It is now read-only.

Latest commit

 

History

History
125 lines (105 loc) · 4.69 KB

changelog.md

File metadata and controls

125 lines (105 loc) · 4.69 KB
Raw

Changelog

1.10

  • Cura Profile Changes
    • Apply transparency to the bed plate to be able to work underneath
    • Add M420 S1 to start gcode for bed leveling (via contribution from @imadcat)
    • Fixed start gcode typo (via contribution from @JaredTamana)
  • Prusa Slicer Profile Changes
    • Apply transparency to bed plate to be able to work underneath
    • Add M420 S1 to start gcode for bed leveling (via contribution from @imadcat)
    • Fixed start gcode typo (via contribution from @JaredTamana)
    • Update file name format and remove commas to prevent export name issues on Mac
  • Other changes
    • Renamed primary branch to Main

1.9

  • Cura Profile Changes
    • Reset xy_offset_layer_0 to default to fix issue when using a brim
    • Added max acceleration speed logic
  • Prusa Slicer Profile Changes
    • Add a 0.6 nozzle profile
  • Other changes
    • Fix typo in Cura readme.md

1.8 - 12/7/2022

  • Cura Profile Changes
    • none
  • Prusa Slicer Profile Changes
    • Disabled "Thick bridges" to improve the quality on shorter bridges
  • Other changes
    • Migration from Google doc to GitHub repo for Prusa Slicer documentation and simplified install instructions and fixed nested directories in zip
    • Added required licenses
    • Added Repo Base Readme to point to both profile instructions
    • moved the changelog to its dedicated file
    • merged Prusa Slicer and Cura changelogs into one for ease of tracking

1.7 - 12/4/2022

  • Cura Profile Changes
    • Significant quality updates based on feedback from @Tenson_UK
      • For the normal profile, set the first layer height to match the rest of the print. (0.2)
      • Set "Initial Layer Horizontal Expansion" and "Hole Horizontal Expansion" to improve quality
      • Set "Top/Bottom Thickness" to improve quality
      • Changed infill logic to increase infill speeds.
        • NOTE: Part strength is slightly weaker, so adjust as needed.
      • Changed print temperature logic for more consistency
      • Changed "Top/Bottom Flow" and "Initial Layer Flow" to improve print quality
      • Set "Combing Mode" to "Within Infill" to reduce the number of retractions.
      • Complete rework of support settings that provides easy removal and good part support.
        • NOTE: Tree supports have no optimization at this time.
      • Adjusted the following experimental settings to improve print quality.
        • "Overhanging Wall Angle"
        • "Overhanging Wall Speed
        • "Small Hole Max Size"
        • "Small Feature Initial Layer Speed"
    • Regrouping/ordering of overrides to match base setting order
  • Prusa Slicer Profile Changes
    • none

1.6 - 12/4/2022

  • Cura Profile Changes
    • set retraciton speed to 60 to match AnkerMake defaults
  • Prusa Slicer Profile Changes
    • none

1.5 - 12/1/2022

  • Cura Profile Changes
    • add back in "extruder_nr": { "default_value": 0 }, to pass unit test and fix bug.
    • fix typos in readme.md
  • Prusa Slicer Profile Changes
    • none

1.4 - 12/1/2022

  • Cura Profile Changes
    • Complete refactor based on feedback from the Cura team to simplify the profile
      • Updated to follow new linting rules and suggestions
      • Significant reduction of base configuration overrides
      • Tested to ensure high-speed printing is functioning
      • Updated printing temperature logic to work correctly.
      • Added slight extrusion to start gcode to compensate for over-retraction after prime
    • Clarified instructions to locate folders
    • Migrated instructions From Google Docs to GitHub
    • Reversed the order of the changelog to show the newest first
  • Prusa Slicer Profile Changes
    • none

1.3 - 11/16/2022

  • Cura Profile Changes
    • Added “machine_head_with_fans_polygon” for one-at-a-time printing
    • Renamed image and platform object to match with GitHub submission. (Ultimaker/Cura#13628)
    • Slight modification to the file structure
    • Updated directions.
  • Prusa Slicer Profile Changes
    • none

1.2 - 10/22/2022

  • Cura Profile Changes
    • Fixed retraction amount defaults.
    • Adjusted acceleration to AnkerMake recommended settings.
    • Completely rebuilt settings from Anker profiles, so the values are consistent.
    • Update start and end gcode to Anker defaults
    • Added custom bed png image
    • Added more detailed settings provided by others
  • Prusa Slicer Profile Changes
    • Set default filament to PLA+
    • Enabled detect bridging perimeters
    • Increase skirt count from 1-3
    • Disabled filament override for max volumetric speed.
    • Change fan to be disabled from 1 to 2 layers
    • Turned off enabled auto cooling to prevent speed reduction
    • Adjusted first_layer_temperature for all filaments to match Anker slicer
    • Adjusted bed temperatures for ABS
    • Fix PLA+ inheriting values from PLA

1.1 - Bug Fixes

1.0 - Initial Release