Wolf Wärmepumpe

[seirpuk]

Einstellungen Homeassistant MQTT für Wolf Heizgeräte und Wärmepumpen

[mozo178]

Hi, seirpuk,

I have a half solution...
If you use this: https://github.com/john30/ebusd-configuration/tree/master/ebusd-2.x.x/de, but change the whole 08.csv to this
https://forum.fhem.de/index.php?topic=89836.0 and change the r to r1 in that cases when there is a description, some datas are working:

I use daniel's ebus adapter (https://github.com/danielkucera/esp8266-arduino-ebus), and the ebusd addon for home assistant. unfortunetaly the HA Mqtt autorecognize only the broadcast datas:

So I will try to adapt the datapoints via nodered.

And unfortantely I cannot set setpoint values. :(

I have a BWL-1S with an AM module.

[asmaps]

Hi, thanks for that link to the FHEM forum, got me a huge step further. Got a Wolf CHA-10. Unfortunately it only works partially, did you pursue this further and have a better configuration/csv? Would you mind sharing your setup?

[puni2k]

Hi there,

if you're still interested i pretty much completed the config file for my CHA-10. Only reading status values though, no configuration parameters and also no writing.
https://github.com/puni2k/ebusd-configuration-wolf

[puni2k]

For anybody interested, i now also managed to create a config file for the Wolf MM-2
https://github.com/puni2k/ebusd-configuration-wolf/blob/main/config_mm.csv