Watch freezing at midnight in LE mode

[WesleyAC]

Several people have reported their watch freezing at midnight in LE mode (first reported in #359, reported several more times since, I think). This is a issue for tracking this and collecting reports from people who have experienced this bug — it seems to be fairly rare. If you experience this, please post here with:

• Information on the firmware you're running
  • When you downloaded/built the firmware (git commit is possible, if not date is fine)
  • What watch faces you had installed
• Information about your settings
  • Did you have the hourly chime on?
  • What was your LE timeout set to?
• What voltage your battery is/was at (or the age of the battery, if you don't know)
• Anything else that might be related

If anyone else has ideas about what else might help, put them here. I'm hopeful that #340 could fix this, but we should make sure we get the best data we can on when this seems to happen.

[Dabaraboo]

of the two freezes i've run into, the most recent was built using the unofficial firmware builder, which was using this commit at the time https://github.com/joeycastillo/Sensor-Watch/tree/63d6bc6aa0ddf4cc1ce1918ef7650852a25e581b

watch faces were

simple clock face
sunrise
moon
Countdown
timer
Interval
stopwatch
alarm
toss up
pulsometer
day one
wyoscan

secondary faces
voltage
preferences
set time hack
fine tune
nanosec

the hourly chime was likely on.
I believe the LE timeout was set to 2h, may have been 1.

Fresh battery. after reassembly and checking the voltage face it was notably lower, I believe 2.6? over time it would climb to the usual 2.95-3v you'd expect.

If this happens again i'll make sure to take better notes