build(deps): bump the angular group across 1 directory with 14 updates

[dependabot]

Bumps the angular group with 14 updates in the /generators/ionic/resources/base directory:

Package	From	To
@angular/common	18.2.12	19.0.0
@angular/core	18.2.12	19.0.0
@angular/forms	18.2.12	19.0.0
@angular/localize	18.2.12	19.0.0
@angular/platform-browser	18.2.12	19.0.0
@angular/platform-browser-dynamic	18.2.12	19.0.0
@angular/router	18.2.12	19.0.0
zone.js	0.14.10	0.15.0
@angular-devkit/build-angular	18.2.12	19.0.0
@angular/cli	18.2.12	19.0.0
@angular/compiler	18.2.12	19.0.0
@angular/compiler-cli	18.2.12	19.0.0
@angular/language-service	18.2.12	19.0.0
jest-preset-angular	14.2.4	14.3.1

Updates @angular/common from 18.2.12 to 19.0.0

Release notes

Sourced from @​angular/common's releases.

v19.0.0

19.0.0 (2024-11-19)

Explore Angular v19 with a blog post from the Angular team: https://blog.angular.dev/meet-angular-v19-7b29dfd05b84

Breaking Changes

compiler

• this.foo property reads no longer refer to template context variables. If you intended to read the template variable, do not use this..

core

• Angular directives, components and pipes are now standalone by default.

  • Specify standalone: false for declarations that are currently declared in @NgModules.
  • ng update for v19 will take care of this automatically.

• TypeScript versions less than 5.5 are no longer supported.

• Timing changes for effect API (in developer preview):

  • effects which are triggered outside of change detection run as part of the change detection process instead of as a microtask. Depending on the specifics of application/test setup, this can result in them executing earlier or later (or requiring additional test steps to trigger; see below examples).

  • effects which are triggered during change detection (e.g. by input signals) run earlier, before the component's template.

• ExperimentalPendingTasks has been renamed to PendingTasks.

• The autoDetect feature of ComponentFixture will now attach the fixture to the ApplicationRef. As a result, errors during automatic change detection of the fixture be reported to the ErrorHandler. This change may cause custom error handlers to observe new failures that were previously unreported.

• createComponent will now render default fallback with empty projectableNodes.

  • When passing an empty array to projectableNodes in the createComponent API, the default fallback content of the ng-content will be rendered if present. To prevent rendering the default content, pass document.createTextNode('') as a projectableNode.

  // The first ng-content will render the default fallback content if present
  createComponent(MyComponent. { projectableNodes: [[], [secondNode]] });
  // To prevent projecting the default fallback content:
  createComponent(MyComponent. { projectableNodes: [[document.createTextNode('')], [secondNode]] });

• Errors that are thrown during ApplicationRef.tick will now be rethrown when using TestBed. These errors should be resolved by ensuring the test environment is set up correctly to complete change detection successfully. There are two alternatives to catch the errors:

  • Instead of waiting for automatic change detection to happen, trigger

... (truncated)

Changelog

Sourced from @​angular/common's changelog.

19.0.0 (2024-11-19)

Blog post: https://blog.angular.dev/meet-angular-v19-7b29dfd05b84

Breaking Changes

compiler

• this.foo property reads no longer refer to template context variables. If you intended to read the template variable, do not use this..

core

• Angular directives, components and pipes are now standalone by default.

  • Specify standalone: false for declarations that are currently declared in @NgModules.
  • ng update for v19 will take care of this automatically.

• TypeScript versions less than 5.5 are no longer supported.

• Timing changes for effect API (in developer preview):

  • effects which are triggered outside of change detection run as part of the change detection process instead of as a microtask. Depending on the specifics of application/test setup, this can result in them executing earlier or later (or requiring additional test steps to trigger; see below examples).

  • effects which are triggered during change detection (e.g. by input signals) run earlier, before the component's template.

• ExperimentalPendingTasks has been renamed to PendingTasks.

• The autoDetect feature of ComponentFixture will now attach the fixture to the ApplicationRef. As a result, errors during automatic change detection of the fixture be reported to the ErrorHandler. This change may cause custom error handlers to observe new failures that were previously unreported.

• createComponent will now render default fallback with empty projectableNodes.

  • When passing an empty array to projectableNodes in the createComponent API, the default fallback content of the ng-content will be rendered if present. To prevent rendering the default content, pass document.createTextNode('') as a projectableNode.

  // The first ng-content will render the default fallback content if present
  createComponent(MyComponent. { projectableNodes: [[], [secondNode]] });
  // To prevent projecting the default fallback content:
  createComponent(MyComponent. { projectableNodes: [[document.createTextNode('')], [secondNode]] });

• Errors that are thrown during ApplicationRef.tick will now be rethrown when using TestBed. These errors should be resolved by ensuring the test environment is set up correctly to complete change detection successfully. There are two alternatives to catch the errors:

  • Instead of waiting for automatic change detection to happen, trigger it synchronously and expect the error. For example, a jasmine test could write expect(() => TestBed.inject(ApplicationRef).tick()).toThrow()

... (truncated)

Commits

• 7dfb127 refactor: add @__PURE__ next to @pureOrBreakMyCode for improved bundler c...
• da9c0c5 refactor: cleanup initializers that use ctor params (#58349)
• 24c6373 feat(common): add optional rounded transform support in cloudinary image load...
• 4b9accd feat(http): promote withRequestsMadeViaParent to stable. (#58221)
• 13c1306 feat(common): disable keyvalue sorting using null compareFn (#57487)
• 09df589 refactor(core): Migrate all packages with the explicit-standalone-flag sche...
• 08b4a8a docs: move JSDoc below constructor (#57187)
• a36744e docs: move JSDoc before functions (#58087)
• 0eb1c5c docs(common): Minor typo in code example (#58085)
• 84b6896 refactor(platform-server): Add an ssr benchmark setup. (#57647)
• Additional commits viewable in compare view

Updates @angular/core from 18.2.12 to 19.0.0

Release notes

Sourced from @​angular/core's releases.

v19.0.0

19.0.0 (2024-11-19)

Explore Angular v19 with a blog post from the Angular team: https://blog.angular.dev/meet-angular-v19-7b29dfd05b84

Breaking Changes

compiler

• this.foo property reads no longer refer to template context variables. If you intended to read the template variable, do not use this..

core

• Angular directives, components and pipes are now standalone by default.

  • Specify standalone: false for declarations that are currently declared in @NgModules.
  • ng update for v19 will take care of this automatically.

• TypeScript versions less than 5.5 are no longer supported.

• Timing changes for effect API (in developer preview):

  • effects which are triggered outside of change detection run as part of the change detection process instead of as a microtask. Depending on the specifics of application/test setup, this can result in them executing earlier or later (or requiring additional test steps to trigger; see below examples).

  • effects which are triggered during change detection (e.g. by input signals) run earlier, before the component's template.

• ExperimentalPendingTasks has been renamed to PendingTasks.

• The autoDetect feature of ComponentFixture will now attach the fixture to the ApplicationRef. As a result, errors during automatic change detection of the fixture be reported to the ErrorHandler. This change may cause custom error handlers to observe new failures that were previously unreported.

• createComponent will now render default fallback with empty projectableNodes.

  • When passing an empty array to projectableNodes in the createComponent API, the default fallback content of the ng-content will be rendered if present. To prevent rendering the default content, pass document.createTextNode('') as a projectableNode.

  // The first ng-content will render the default fallback content if present
  createComponent(MyComponent. { projectableNodes: [[], [secondNode]] });
  // To prevent projecting the default fallback content:
  createComponent(MyComponent. { projectableNodes: [[document.createTextNode('')], [secondNode]] });

• Errors that are thrown during ApplicationRef.tick will now be rethrown when using TestBed. These errors should be resolved by ensuring the test environment is set up correctly to complete change detection successfully. There are two alternatives to catch the errors:

  • Instead of waiting for automatic change detection to happen, trigger

... (truncated)

Changelog

Sourced from @​angular/core's changelog.

19.0.0 (2024-11-19)

Blog post: https://blog.angular.dev/meet-angular-v19-7b29dfd05b84

Breaking Changes

compiler

• this.foo property reads no longer refer to template context variables. If you intended to read the template variable, do not use this..

core

• Angular directives, components and pipes are now standalone by default.

  • Specify standalone: false for declarations that are currently declared in @NgModules.
  • ng update for v19 will take care of this automatically.

• TypeScript versions less than 5.5 are no longer supported.

• Timing changes for effect API (in developer preview):

  • effects which are triggered outside of change detection run as part of the change detection process instead of as a microtask. Depending on the specifics of application/test setup, this can result in them executing earlier or later (or requiring additional test steps to trigger; see below examples).

  • effects which are triggered during change detection (e.g. by input signals) run earlier, before the component's template.

• ExperimentalPendingTasks has been renamed to PendingTasks.

• The autoDetect feature of ComponentFixture will now attach the fixture to the ApplicationRef. As a result, errors during automatic change detection of the fixture be reported to the ErrorHandler. This change may cause custom error handlers to observe new failures that were previously unreported.

• createComponent will now render default fallback with empty projectableNodes.

  • When passing an empty array to projectableNodes in the createComponent API, the default fallback content of the ng-content will be rendered if present. To prevent rendering the default content, pass document.createTextNode('') as a projectableNode.

  // The first ng-content will render the default fallback content if present
  createComponent(MyComponent. { projectableNodes: [[], [secondNode]] });
  // To prevent projecting the default fallback content:
  createComponent(MyComponent. { projectableNodes: [[document.createTextNode('')], [secondNode]] });

• Errors that are thrown during ApplicationRef.tick will now be rethrown when using TestBed. These errors should be resolved by ensuring the test environment is set up correctly to complete change detection successfully. There are two alternatives to catch the errors:

  • Instead of waiting for automatic change detection to happen, trigger it synchronously and expect the error. For example, a jasmine test could write expect(() => TestBed.inject(ApplicationRef).tick()).toThrow()

... (truncated)

Commits

• df210a4 refactor(core): mark linkedSignal as developer preview (#58684)
• e6514b9 fix(migrations): do not migrate next calls in template if not an EventEmitter...
• 91a616f refactor(core): add REQUEST, RESPONSE_INIT and REQUEST_CONTEXT tokens (...
• fa1b021 refactor(core): add performance feature flag for incremental hydration (#58658)
• 5fe57d4 fix(core): fixes issues with control flow and incremental hydration (#58644)
• 715caea refactor(migrations): typos in signal migration incompatibility reasons (#58636)
• e26797b fix(migrations): replace removed NgModules in tests with their exports (#58627)
• b84ed2b fix(migrations): include the output migration in the defaults of the signal m...
• a5e7a02 refactor(core): moves incremental hydration codebase to better locations (#58...
• 560282a fix(compiler): control flow nodes with root at the end projected incorrectly ...
• Additional commits viewable in compare view

Updates @angular/forms from 18.2.12 to 19.0.0

Release notes

Sourced from @​angular/forms's releases.

v19.0.0

19.0.0 (2024-11-19)

Explore Angular v19 with a blog post from the Angular team: https://blog.angular.dev/meet-angular-v19-7b29dfd05b84

Breaking Changes

compiler

• this.foo property reads no longer refer to template context variables. If you intended to read the template variable, do not use this..

core

• Angular directives, components and pipes are now standalone by default.

  • Specify standalone: false for declarations that are currently declared in @NgModules.
  • ng update for v19 will take care of this automatically.

• TypeScript versions less than 5.5 are no longer supported.

• Timing changes for effect API (in developer preview):

  • effects which are triggered outside of change detection run as part of the change detection process instead of as a microtask. Depending on the specifics of application/test setup, this can result in them executing earlier or later (or requiring additional test steps to trigger; see below examples).

  • effects which are triggered during change detection (e.g. by input signals) run earlier, before the component's template.

• ExperimentalPendingTasks has been renamed to PendingTasks.

• The autoDetect feature of ComponentFixture will now attach the fixture to the ApplicationRef. As a result, errors during automatic change detection of the fixture be reported to the ErrorHandler. This change may cause custom error handlers to observe new failures that were previously unreported.

• createComponent will now render default fallback with empty projectableNodes.

  • When passing an empty array to projectableNodes in the createComponent API, the default fallback content of the ng-content will be rendered if present. To prevent rendering the default content, pass document.createTextNode('') as a projectableNode.

  // The first ng-content will render the default fallback content if present
  createComponent(MyComponent. { projectableNodes: [[], [secondNode]] });
  // To prevent projecting the default fallback content:
  createComponent(MyComponent. { projectableNodes: [[document.createTextNode('')], [secondNode]] });

• Errors that are thrown during ApplicationRef.tick will now be rethrown when using TestBed. These errors should be resolved by ensuring the test environment is set up correctly to complete change detection successfully. There are two alternatives to catch the errors:

  • Instead of waiting for automatic change detection to happen, trigger

... (truncated)

Changelog

Sourced from @​angular/forms's changelog.

19.0.0 (2024-11-19)

Blog post: https://blog.angular.dev/meet-angular-v19-7b29dfd05b84

Breaking Changes

compiler

• this.foo property reads no longer refer to template context variables. If you intended to read the template variable, do not use this..

core

• Angular directives, components and pipes are now standalone by default.

  • Specify standalone: false for declarations that are currently declared in @NgModules.
  • ng update for v19 will take care of this automatically.

• TypeScript versions less than 5.5 are no longer supported.

• Timing changes for effect API (in developer preview):

  • effects which are triggered outside of change detection run as part of the change detection process instead of as a microtask. Depending on the specifics of application/test setup, this can result in them executing earlier or later (or requiring additional test steps to trigger; see below examples).

  • effects which are triggered during change detection (e.g. by input signals) run earlier, before the component's template.

• ExperimentalPendingTasks has been renamed to PendingTasks.

• The autoDetect feature of ComponentFixture will now attach the fixture to the ApplicationRef. As a result, errors during automatic change detection of the fixture be reported to the ErrorHandler. This change may cause custom error handlers to observe new failures that were previously unreported.

• createComponent will now render default fallback with empty projectableNodes.

  • When passing an empty array to projectableNodes in the createComponent API, the default fallback content of the ng-content will be rendered if present. To prevent rendering the default content, pass document.createTextNode('') as a projectableNode.

  // The first ng-content will render the default fallback content if present
  createComponent(MyComponent. { projectableNodes: [[], [secondNode]] });
  // To prevent projecting the default fallback content:
  createComponent(MyComponent. { projectableNodes: [[document.createTextNode('')], [secondNode]] });

• Errors that are thrown during ApplicationRef.tick will now be rethrown when using TestBed. These errors should be resolved by ensuring the test environment is set up correctly to complete change detection successfully. There are two alternatives to catch the errors:

  • Instead of waiting for automatic change detection to happen, trigger it synchronously and expect the error. For example, a jasmine test could write expect(() => TestBed.inject(ApplicationRef).tick()).toThrow()

... (truncated)

Commits

• 93c3f7a build: remove usages of useDefineForClassFields: false (#58297)
• 1f45338 Revert "fix(forms): fix FormRecord type inference (#50750)" (#58315)
• 79d9be3 Revert "feat(forms): add ability to clear a FormRecord (#50750)" (#58315)
• a5b0394 Revert "test(forms): add unit test (#50750)" (#58315)
• b0c4c1f test(forms): add unit test (#50750)
• 3e7d724 feat(forms): add ability to clear a FormRecord (#50750)
• 18b6f33 fix(forms): fix FormRecord type inference (#50750)
• 09df589 refactor(core): Migrate all packages with the explicit-standalone-flag sche...
• 186b524 docs: add info on AbstractControl.source type. (#58094)
• 84b6896 refactor(platform-server): Add an ssr benchmark setup. (#57647)
• Additional commits viewable in compare view

Updates @angular/localize from 18.2.12 to 19.0.0

Release notes

Sourced from @​angular/localize's releases.

v19.0.0

19.0.0 (2024-11-19)

Explore Angular v19 with a blog post from the Angular team: https://blog.angular.dev/meet-angular-v19-7b29dfd05b84

Breaking Changes

compiler

• this.foo property reads no longer refer to template context variables. If you intended to read the template variable, do not use this..

core

• Angular directives, components and pipes are now standalone by default.

  • Specify standalone: false for declarations that are currently declared in @NgModules.
  • ng update for v19 will take care of this automatically.

• TypeScript versions less than 5.5 are no longer supported.

• Timing changes for effect API (in developer preview):

  • effects which are triggered outside of change detection run as part of the change detection process instead of as a microtask. Depending on the specifics of application/test setup, this can result in them executing earlier or later (or requiring additional test steps to trigger; see below examples).

  • effects which are triggered during change detection (e.g. by input signals) run earlier, before the component's template.

• ExperimentalPendingTasks has been renamed to PendingTasks.

• The autoDetect feature of ComponentFixture will now attach the fixture to the ApplicationRef. As a result, errors during automatic change detection of the fixture be reported to the ErrorHandler. This change may cause custom error handlers to observe new failures that were previously unreported.

• createComponent will now render default fallback with empty projectableNodes.

  • When passing an empty array to projectableNodes in the createComponent API, the default fallback content of the ng-content will be rendered if present. To prevent rendering the default content, pass document.createTextNode('') as a projectableNode.

  // The first ng-content will render the default fallback content if present
  createComponent(MyComponent. { projectableNodes: [[], [secondNode]] });
  // To prevent projecting the default fallback content:
  createComponent(MyComponent. { projectableNodes: [[document.createTextNode('')], [secondNode]] });

• Errors that are thrown during ApplicationRef.tick will now be rethrown when using TestBed. These errors should be resolved by ensuring the test environment is set up correctly to complete change detection successfully. There are two alternatives to catch the errors:

  • Instead of waiting for automatic change detection to happen, trigger

... (truncated)

Changelog

Sourced from @​angular/localize's changelog.

19.0.0 (2024-11-19)

Blog post: https://blog.angular.dev/meet-angular-v19-7b29dfd05b84

Breaking Changes

compiler

• this.foo property reads no longer refer to template context variables. If you intended to read the template variable, do not use this..

core

• Angular directives, components and pipes are now standalone by default.

  • Specify standalone: false for declarations that are currently declared in @NgModules.
  • ng update for v19 will take care of this automatically.

• TypeScript versions less than 5.5 are no longer supported.

• Timing changes for effect API (in developer preview):

  • effects which are triggered outside of change detection run as part of the change detection process instead of as a microtask. Depending on the specifics of application/test setup, this can result in them executing earlier or later (or requiring additional test steps to trigger; see below examples).

  • effects which are triggered during change detection (e.g. by input signals) run earlier, before the component's template.

• ExperimentalPendingTasks has been renamed to PendingTasks.

• The autoDetect feature of ComponentFixture will now attach the fixture to the ApplicationRef. As a result, errors during automatic change detection of the fixture be reported to the ErrorHandler. This change may cause custom error handlers to observe new failures that were previously unreported.

• createComponent will now render default fallback with empty projectableNodes.

  • When passing an empty array to projectableNodes in the createComponent API, the default fallback content of the ng-content will be rendered if present. To prevent rendering the default content, pass document.createTextNode('') as a projectableNode.

  // The first ng-content will render the default fallback content if present
  createComponent(MyComponent. { projectableNodes: [[], [secondNode]] });
  // To prevent projecting the default fallback content:
  createComponent(MyComponent. { projectableNodes: [[document.createTextNode('')], [secondNode]] });

• Errors that are thrown during ApplicationRef.tick will now be rethrown when using TestBed. These errors should be resolved by ensuring the test environment is set up correctly to complete change detection successfully. There are two alternatives to catch the errors:

  • Instead of waiting for automatic change detection to happen, trigger it synchronously and expect the error. For example, a jasmine test could write expect(() => TestBed.inject(ApplicationRef).tick()).toThrow()

... (truncated)

Commits

• e7566c3 release: cut the v19.0.0 release
• b2802e5 docs: update links in the roadmap (#58728)
• 02b258a docs: update the angular roadmap for v19 (#58549)
• f696ecb docs(docs-infra): redirect to the root of the app. (#58700)
• c79dd4e docs(docs-infra): Fix overflow styles in cards code examples (#58704)
• 88c253f docs(docs-infra): Fix the borders of Cards header to match its parent (#58704)
• 2c04430 docs: update version compatibility. (#58720)
• 2c05f4c docs: add v19 developer event banner (#58721)
• 805d8f1 docs: reorganize NgModule and Animations guides (#58694)
• 392b992 docs(docs-infra): remove Featured section from the API reference list page (#...
• Additional commits viewable in compare view

Updates @angular/platform-browser from 18.2.12 to 19.0.0

Release notes

Sourced from @​angular/platform-browser's releases.

v19.0.0

19.0.0 (2024-11-19)

Explore Angular v19 with a blog post from the Angular team: https://blog.angular.dev/meet-angular-v19-7b29dfd05b84

Breaking Changes

compiler

• this.foo property reads no longer refer to template context variables. If you intended to read the template variable, do not use this..

core

• Angular directives, components and pipes are now standalone by default.

  • Specify standalone: false for declarations that are currently declared in @NgModules.
  • ng update for v19 will take care of this automatically.

• TypeScript versions less than 5.5 are no longer supported.

• Timing changes for effect API (in developer preview):

  • effects which are triggered outside of change detection run as part of the change detection process instead of as a microtask. Depending on the specifics of application/test setup, this can result in them executing earlier or later (or requiring additional test steps to trigger; see below examples).

  • effects which are triggered during change detection (e.g. by input signals) run earlier, before the component's template.

• ExperimentalPendingTasks has been renamed to PendingTasks.

• The autoDetect feature of ComponentFixture will now attach the fixture to the ApplicationRef. As a result, errors during automatic change detection of the fixture be reported to the ErrorHandler. This change may cause custom error handlers to observe new failures that were previously unreported.

• createComponent will now render default fallback with empty projectableNodes.

  • When passing an empty array to projectableNodes in the createComponent API, the default fallback content of the ng-content will be rendered if present. To prevent rendering the default content, pass document.createTextNode('') as a projectableNode.

  // The first ng-content will render the default fallback content if present
  createComponent(MyComponent. { projectableNodes: [[], [secondNode]] });
  // To prevent projecting the default fallback content:
  createComponent(MyComponent. { projectableNodes: [[document.createTextNode('')], [secondNode]] });

• Errors that are thrown during ApplicationRef.tick will now be rethrown when using TestBed. These errors should be resolved by ensuring the test environment is set up correctly to complete change detection successfully. There are two alternatives to catch the errors:

  • Instead of waiting for automatic change detection to happen, trigger

... (truncated)

Changelog

Sourced from @​angular/platform-browser's changelog.

19.0.0 (2024-11-19)

Blog post: https://blog.angular.dev/meet-angular-v19-7b29dfd05b84

Breaking Changes

compiler

• this.foo property reads no longer refer to template context variables. If you intended to read the template variable, do not use this..

core

• Angular directives, components and pipes are now standalone by default.

  • Specify standalone: false for declarations that are currently declared in @NgModules.
  • ng update for v19 will take care of this automatically.

• TypeScript versions less than 5.5 are no longer supported.

• Timing changes for effect API (in developer preview):

  • effects which are triggered outside of change detection run as part of the change detection process instead of as a microtask. Depending on the specifics of application/test setup, this can result in them executing earlier or later (or requiring additional test steps to trigger; see below examples).

  • effects which are triggered during change detection (e.g. by input signals) run earlier, before the component's template.

• ExperimentalPendingTasks has been renamed to PendingTasks.

• The autoDetect feature of ComponentFixture will now attach the fixture to the ApplicationRef. As a result, errors during automatic change detection of the fixture be reported to the ErrorHandler. This change may cause custom error handlers to observe new failures that were previously unreported.

• createComponent will now render default fallback with empty projectableNodes.

  • When passing an empty array to projectableNodes in the createComponent API, the default fallback content of the ng-content will be rendered if present. To prevent rendering the default content, pass document.createTextNode('') as a projectableNode.

  // The first ng-content will render the default fallback content if present
  createComponent(MyComponent. { projectableNodes: [[], [secondNode]] });
  // To prevent projecting the default fallback content:
  createComponent(MyComponent. { projectableNodes: [[document.createTextNode('')], [secondNode]] });

• Errors that are thrown during ApplicationRef.tick will now be rethrown when using TestBed. These errors should be resolved by ensuring the test environment is set up correctly to complete change detection successfully. There are two alternatives to catch the errors:

  • Instead of waiting for automatic change detection to happen, trigger it synchronously and expect the error. For example, a jasmine test could write expect(() => TestBed.inject(ApplicationRef).tick()).toThrow()

... (truncated)

Commits

• c36a1c0 fix(platform-browser): correctly add external stylesheets to ShadowDOM compon...
• 917e99d docs(platform-browser): update usage notes for incremental hydration (#58339)
• 19edf2c feat(core): add syntactic sugar for initializers (#53152)
• 69fc5ae feat(core): Add incremental hydration public api (#58249)
• 9544930 refactor(core): add incremental hydration infrastructure (#58193)
• b542f15 docs: removed typos of withHttpTransferCacheOptions description (#58244)
• 09df589 refactor(core): Migrate all packages with the explicit-standalone-flag sche...
• 5c61f46 refactor(platform-browser): remove deprecated `BrowserModule.withServerTransi...
• 84b6896 refactor(platform-server): Add an ssr benchmark setup. (#57647)
• 2545743 refactor(core): support external runtime styles via a component feature (#57922)
• Additional commits viewable in compare view

Updates @angular/platform-browser-dynamic from 18.2.12 to 19.0.0

Release notes

Sourced from @​angular/platform-browser-dynamic's releases.

v19.0.0

19.0.0 (2024-11-19)

Explore Angular v19 with a blog post from the Angular team: https://blog.angular.dev/meet-angular-v19-7b29dfd05b84

Breaking Changes

compiler

• this.foo property reads no longer refer to template context variables. If you intended to read the template variable, do not use this..

core

• Angular directives, components and pipes are now standalone by default.

  • Specify standalone: false for declarations that are currently declared in @NgModules.
  • ng update for v19 will take care of this automatically.

• TypeScript versions less than 5.5 are no longer supported.

• Timing changes for effect API (in developer preview):

  • effects which are triggered outside of change detection run as part of the change detection process instead of as a microtask. Depending on the specifics of application/test setup, this can result in them executing earlier or later (or requiring additional test steps to trigger; see below examples).

  • effects which are triggered during change detection (e.g. by input signals) run earlier, before the component's template.

• ExperimentalPendingTasks has been renamed to PendingTasks.

• The autoDetect feature of ComponentFixture will now attach the fixture to the ApplicationRef. As a result, errors during automatic change detection of the fixture be reported to the ErrorHandler. This change may cause custom error handlers to observe new failures that were previously unreported.

• createComponent will now render default fallback with empty projectableNodes.

  • When passing an empty array to projectableNodes in the createComponent API, the default fallback content of the ng-content will be rendered if present. To prevent rendering the default content, pass document.createTextNode('') as a projectableNode.

  // The first ng-content will render the default fallback content if present
  createComponent(MyComponent. { projectableNodes: [[], [secondNode]] });
  // To prevent projecting the default fallback content:
  createComponent(MyComponent. { projectableNodes: [[document.createTextNode('')], [secondNode]] });

• Errors that are thrown during ApplicationRef.tick will now be rethrown when using TestBed. These errors should be resolved by ensuring the test environment is set up correctly to complete change detection successfully. There are two alternatives to catch the errors:

  • Instead of waiting for automatic change detection to happen, trigger

... (truncated)

Changelog

Sourced from @​angular/platform-browser-dynamic's changelog.

19.0.0 (2024-11-19)

Blog post: https://blog.angular.dev/meet-angular-v19-7b29dfd05b84

Breaking Changes

compiler

• this.foo property reads no longer refer to template context variables. If you intended to read the template variable, do not use this..

core

• Angular directives, components and pipes are now standalone by default.

  • Specify standalone: false for declarations that are currently declared in @NgModules.
  • ng update for v19 will take care of this automatically.

• TypeScript versions less than 5.5 are no longer supported.

• Timing changes for effect API (in developer preview):

  • effects which are triggered outside of change detection run as part of the change detection process instead of as a microtask. Depending on the specifics of application/test setup, this can result in them executing earlier or later (or requiring additional test steps to trigger; see below examples).

  • effects which are triggered during change detection (e.g. by input signals) run earlier, before the component's template.

• ExperimentalPendingTasks has been renamed to PendingTasks.

• The autoDetect feature of ComponentFixture will now attach the fixture to the ApplicationRef. As a result, errors during automatic change detection of the fixture be reported to the ErrorHandler. This change may cause custom error handlers to observe new failures that were previously unreported.

• createComponent will now render default fallback with empty projectableNodes.

  • When passing an empty array to projectableNodes in the createComponent API, the default fallback content of the ng-content will be rendered if present. To prevent rendering the default content, pass document.createTextNode('') as a projectableNode.

  // The first ng-content will render the default fallback content if present
  createComponent(MyComponent. { projectableNodes: [[], [secondNode]] });
  // To prevent projecting the default fallback content:
  createComponent(MyComponent. { projectableNodes: [[document.createTextNode('')], [secondNode]] });

• Errors that are thrown during ApplicationRef.tick will now be rethrown when using TestBed. These errors should be resolved by ensuring the test environment is set up correctly to complete change detection successfully. There are two alternatives to catch the errors:

  • Instead of waiting for automatic change detection to happen, trigger it synchronously and expect the error. For example, a jasmine test could write expect(() => TestBed.inject(ApplicationRef).tick()).toThrow()

... (truncated)

Commits

• 09df589 refactor(core): Migrate all packages with the explicit-standalone-flag sche...
• 84b6896 refactor(platform-server): Add an ssr benchmark setup. (#57647)
• 9dbe6fc refactor: update license text to point to angular.dev (#57901)
• See full diff in compare view

Updates @angular/router from 18.2.12 to 19.0.0

Release notes

Sourced from @​angular/router's releases.

v19.0.0

19.0.0 (2024-11-19)

Explore Angular v19 with a blog post from the Angular team: https://blog.angular.dev/meet-angular-v19-7b29dfd05b84

Breaking Changes

compiler

• this.foo property reads no longer refer to template context variables. If you intended to read the template variable, do not use this..

core

• Angular directives, components and pipes are now standalone by default.

  • Specify standalone: false for declarations that are currently declared in @NgModules.
  • ng update for v19 will take care of this automatically.

• TypeScript versions less than 5.5 are no longer supported.

• Timing changes for effect API (in developer preview):

  • effects which are triggered outside of change detection run as part of the change detection process instead of as a microtask. Depending on the specifics of application/test setup, this can result in them executing earlier or later (or requiring additional test steps to trigger; see below examples).

  • effects which are triggered during change detection (e.g. by input signals) run earlier, before the component's template.

• ExperimentalPendingTasks has been renamed to PendingTasks.

• The autoDetect feature of ComponentFixture will now attach the fixture to the ApplicationRef. As a result, errors during automatic change detection of the fixture be reported to the ErrorHandler. This change may cause custom error handlers to observe new failures that were previously unreported.

• createComponent will now render default fallback with empty projectableNodes.

  • When passing an empty array to projectableNodes in the createComponent API, the default fallback content of the ng-content will be rendered if present. To prevent rendering the default content, pass document.createTextNode('') as a projectableNode.

  // The first ng-content will render the default fallback content if present
  createComponent(MyComponent. { projectableNodes: [[], [secondNode]] });
  // To prevent projecting the default fallback content:
  createComponent(MyComponent. { projectableNodes: [[document.createTextNode('')], [secondNode]] });

• Errors that are thrown during ApplicationRef.tick will now be rethrown when using TestBed. These errors should be resolved by ensuring the test environment is set up correctly to complete change detection successfully. There are two alternatives to catch the errors:

  • Instead of waiting for automatic change detection to happen, trigger

... (truncated)

Changelog

Sourced from @​angular/router's changelog.

19.0.0 (2024-11-19)

Blog post: https://blog.angular.dev/meet-angular-v19-7b29dfd05b84

Breaking Changes

compiler

• this.foo property reads no longer refer to template context variables. If you intended to read the template variable, do not use this..

core

• Angular directives, components and pipes are now standalone by default.

  • Specify standalone: false for declarations that are currently declared in @NgModules.
  • ng update for v19 will take care of this automatically.

• TypeScript versions less than 5.5 are no longer supported.

• Timing changes for effect API (in developer preview):

  • effects which are triggered outside of change detection run as part of the change detection process instead of as a microtask. Depending on the specifics of application/test setup, this can result in them executing earlier or later (or requiring additional test steps to trigger; see below examples).

  • effects which are triggered during change detection (e.g. by input signals) run earlier, before the component's template.

• ExperimentalPendingTasks has been renamed to PendingTasks.

• The autoDetect feature of ComponentFixture will now attach the fixture to the ApplicationRef. As a result, errors during automatic change detection of the fixture be reported to the ErrorHandler. This change may cause custom error handlers to observe new failures that were previously unreported.

• createComponent will now render default fallback with empty projectableNodes.

  • When passing an empty array to projectableNodes in the createComponent API, the default fallback content of the ng-content will be rendered if present. To prevent rendering the default content, pass document.createTextNode('') as a projectableNode.

  // The first ng-content will render the default fallback content if present
  createComponent(MyComponent. { projectableNodes: [[], [secondNode]] });
  // To prevent projecting the default fallback content:
  createComponent(MyComponent. { projectableNodes: [[document.createTextNode('')], [secondNode]] });

• Errors that are thrown during ApplicationRef.tick will now be rethrown when using TestBed. These errors should be resolved by ensuring the test environment is set up correctly to complete change detection successfully. There are two alternatives to catch the errors:

  • Instead of waiting for automatic change detection to happen, trigger it synchronously and expect the error. For example, a jasmine test could write expect(() => TestBed.inject(ApplicationRef).tick()).toThrow()

Description has been truncated

[dependabot]

Looks like these dependencies are updatable in another way, so this is no longer needed.