Skip to content

RAK7200 Helium Mapper - S76G SiP (STM32l073RX, SX1276, CXD5603GF)

Notifications You must be signed in to change notification settings

jeroenkl/RAK7200_Helium_Mapper

 
 

Repository files navigation

RAK7200 Helium Mapper

RAK7200 - S76G SiP (STM32l073RX, SX1276, CXD5603GF)

Building firmware for the RAK7200 powered by the AcSiP S76G SiP

Required software:

  • Arduino IDE https://www.arduino.cc/en/software

  • STM32CubeProgrammer https://www.st.com/en/development-tools/stm32cubeprog.html

  • Install the Arduino IDE and STM32CubeProgrammer

  • Start the Arduino IDE

    • Go to Tools > Board > Board Manager type STM32 in the filter your search... field
    • Click Install to install the current version of the STM32 Cores Board
  • After the STM32 Cores Boards is installed exit and restart the Arduino IDE

    • Go to Tools > Board > STM32 Boards > Nucleo-64
    • Then select the microcontroller Tools > Board Part Number > Nucleo L073RZ
    • Then configure the environment:
      • Tools > U(S)ART Support > Enable (generic 'Serial')
      • Tools > USB Support (if available) > None
      • Tools > USB Speed (if available) > Low/Full Speed
      • Tools > Optimize > Smallest (Os default) or Fast (O1)
      • Tools > C Runtime Library > Newlib Nano (default)
      • Tools > Upload Method > STM32CubeProgrammer (serial)
      • Tools > Port > Select the port associated with the RAK7200}

When you have finished configuring the environment it should look similar to this:

Credits

RAK Wireless for the WisNode Track Lite RAK7200

Linar Yusupov for the POST_S76G sketch, Arduino board configuration and S76G pin definitions which advanced the project tremendously.

About

RAK7200 Helium Mapper - S76G SiP (STM32l073RX, SX1276, CXD5603GF)

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages

  • C++ 86.2%
  • C 7.8%
  • JavaScript 6.0%