ercf_klipperscreen.conf

# ERCF Happy Hare KlipperScreen menus. Don't remove this line, installer needs it!
#
# Copyright (C) 2023  moggieuk#6538 (discord)
#                     moggieuk@hotmail.com
#
# Menu options:
# name, icon, panel, method, confirm, enable, params, style, NEW: show_disabled, refresh_on
#
# Additional functionality added with this ERCF Happy Hare fork:
#
# Options:
# show_disabled - True will cause 'enable' logic to show button disabled rather than not display it
# refresh_on - List of printer variables to monitor real time for 'show_disabled' 
#
# Menu name:
# can specify multiple roots, e.g. [menu __main,__print mymenu]
# will duplicate on both __main and __print menus
# (no space after comman)
#

[menu __main,__print ercf]
name: {{ gettext('Manage ERCF') }}
icon: ercf_carrot
panel: ercf_main
enable: {{ printer.ercf is defined and not klipperscreen.side_ercf_shortcut }}

[menu __main,__print ercf filament_editor]
name: {{ gettext('Filaments...') }}
icon: ercf_filaments
panel: ercf_filaments

[menu __main,__print ercf ttg]
name: {{ gettext('Manage TTG...') }}
icon: ercf_ttg_map
panel: ercf_toolmap

[menu __main,__print ercf preload_gates]
name: {{ gettext('Preload Gate...') }}
icon: ercf_reset
enable: {{ printer.idle_timeout.state != "Printing" }}
show_disabled: True
refresh_on: printer.idle_timeout.state

# Generated menus for each tool/gate...
[menu __main,__print ercf preload_gates PG0]
name: {{ gettext('Preload Gate #0') }}
icon: ercf_reset
method: printer.gcode.script
params: { "script":"ERCF_PRELOAD GATE=0" }
enable: {{ printer.ercf.action == "Idle" }}
show_disabled: True
refresh_on: printer.ercf.action
[menu __main,__print ercf preload_gates PG1]
name: {{ gettext('Preload Gate #1') }}
icon: ercf_reset
method: printer.gcode.script
params: { "script":"ERCF_PRELOAD GATE=1" }
enable: {{ printer.ercf.action == "Idle" }}
show_disabled: True
refresh_on: printer.ercf.action
[menu __main,__print ercf preload_gates PG2]
name: {{ gettext('Preload Gate #2') }}
icon: ercf_reset
method: printer.gcode.script
params: { "script":"ERCF_PRELOAD GATE=2" }
enable: {{ printer.ercf.action == "Idle" }}
show_disabled: True
refresh_on: printer.ercf.action
[menu __main,__print ercf preload_gates PG3]
name: {{ gettext('Preload Gate #3') }}
icon: ercf_reset
method: printer.gcode.script
params: { "script":"ERCF_PRELOAD GATE=3" }
enable: {{ printer.ercf.action == "Idle" }}
show_disabled: True
refresh_on: printer.ercf.action
[menu __main,__print ercf preload_gates PG4]
name: {{ gettext('Preload Gate #4') }}
icon: ercf_reset
method: printer.gcode.script
params: { "script":"ERCF_PRELOAD GATE=4" }
enable: {{ printer.ercf.action == "Idle" }}
show_disabled: True
refresh_on: printer.ercf.action
[menu __main,__print ercf preload_gates PG5]
name: {{ gettext('Preload Gate #5') }}
icon: ercf_reset
method: printer.gcode.script
params: { "script":"ERCF_PRELOAD GATE=5" }
enable: {{ printer.ercf.action == "Idle" }}
show_disabled: True
refresh_on: printer.ercf.action
[menu __main,__print ercf preload_gates PG6]
name: {{ gettext('Preload Gate #6') }}
icon: ercf_reset
method: printer.gcode.script
params: { "script":"ERCF_PRELOAD GATE=6" }
enable: {{ printer.ercf.action == "Idle" }}
show_disabled: True
refresh_on: printer.ercf.action
[menu __main,__print ercf preload_gates PG7]
name: {{ gettext('Preload Gate #7') }}
icon: ercf_reset
method: printer.gcode.script
params: { "script":"ERCF_PRELOAD GATE=7" }
enable: {{ printer.ercf.action == "Idle" }}
show_disabled: True
refresh_on: printer.ercf.action
[menu __main,__print ercf preload_gates PG8]
name: {{ gettext('Preload Gate #8') }}
icon: ercf_reset
method: printer.gcode.script
params: { "script":"ERCF_PRELOAD GATE=8" }
enable: {{ printer.ercf.action == "Idle" }}
show_disabled: True
refresh_on: printer.ercf.action

[menu __main,__print ercf check_gates]
name: {{ gettext('Check Gate...') }}
icon: ercf_checkgates
enable: {{ printer.idle_timeout.state != "Printing" }}
show_disabled: True
refresh_on: printer.idle_timeout.state

# Generated menus for each tool/gate...
[menu __main,__print ercf check_gates CG0]
name: {{ gettext('Check Gate #0') }}
icon: ercf_checkgate0
method: printer.gcode.script
params: { "script":"ERCF_CHECK_GATES GATE=0 QUIET=1" }
enable: {{ printer.ercf.action == "Idle" }}
show_disabled: True
refresh_on: printer.ercf.action
[menu __main,__print ercf check_gates CG1]
name: {{ gettext('Check Gate #1') }}
icon: ercf_checkgate1
method: printer.gcode.script
params: { "script":"ERCF_CHECK_GATES GATE=1 QUIET=1" }
enable: {{ printer.ercf.action == "Idle" }}
show_disabled: True
refresh_on: printer.ercf.action
[menu __main,__print ercf check_gates CG2]
name: {{ gettext('Check Gate #2') }}
icon: ercf_checkgate2
method: printer.gcode.script
params: { "script":"ERCF_CHECK_GATES GATE=2 QUIET=1" }
enable: {{ printer.ercf.action == "Idle" }}
show_disabled: True
refresh_on: printer.ercf.action
[menu __main,__print ercf check_gates CG3]
name: {{ gettext('Check Gate #3') }}
icon: ercf_checkgate3
method: printer.gcode.script
params: { "script":"ERCF_CHECK_GATES GATE=3 QUIET=1" }
enable: {{ printer.ercf.action == "Idle" }}
show_disabled: True
refresh_on: printer.ercf.action
[menu __main,__print ercf check_gates CG4]
name: {{ gettext('Check Gate #4') }}
icon: ercf_checkgate4
method: printer.gcode.script
params: { "script":"ERCF_CHECK_GATES GATE=4 QUIET=1" }
enable: {{ printer.ercf.action == "Idle" }}
show_disabled: True
refresh_on: printer.ercf.action
[menu __main,__print ercf check_gates CG5]
name: {{ gettext('Check Gate #5') }}
icon: ercf_checkgate5
method: printer.gcode.script
params: { "script":"ERCF_CHECK_GATES GATE=5 QUIET=1" }
enable: {{ printer.ercf.action == "Idle" }}
show_disabled: True
refresh_on: printer.ercf.action
[menu __main,__print ercf check_gates CG6]
name: {{ gettext('Check Gate #6') }}
icon: ercf_checkgate6
method: printer.gcode.script
params: { "script":"ERCF_CHECK_GATES GATE=6 QUIET=1" }
enable: {{ printer.ercf.action == "Idle" }}
show_disabled: True
refresh_on: printer.ercf.action
[menu __main,__print ercf check_gates CG7]
name: {{ gettext('Check Gate #7') }}
icon: ercf_checkgate7
method: printer.gcode.script
params: { "script":"ERCF_CHECK_GATES GATE=7 QUIET=1" }
enable: {{ printer.ercf.action == "Idle" }}
show_disabled: True
refresh_on: printer.ercf.action
[menu __main,__print ercf check_gates CG8]
name: {{ gettext('Check Gate #8') }}
icon: ercf_checkgate8
method: printer.gcode.script
params: { "script":"ERCF_CHECK_GATES GATE=8 QUIET=1" }
enable: {{ printer.ercf.action == "Idle" }}
show_disabled: True
refresh_on: printer.ercf.action

[menu __main,__print ercf tools]
name: {{ gettext('Load Tool...') }}
icon: extruder
enable: {{ printer.idle_timeout.state != "Printing" }}
show_disabled: True
refresh_on: printer.idle_timeout.state

# Generated menus for each tool/gate...
[menu __main,__print ercf tools T0]
name: {{ gettext('T0') }}
icon: ercf_t0
method: printer.gcode.script
params: { "script":"ERCF_CHANGE_TOOL TOOL=0 QUIET=1" }
enable: {{ (printer.ercf.tool != 0 or (printer.ercf.tool == 0 and printer.ercf.filament != "Loaded")) and printer.ercf.gate_status[0] != 0 and printer.ercf.action == "Idle" }}
show_disabled: True
refresh_on: printer.ercf.tool, printer.ercf.gate_status, printer.ercf.filament, printer.ercf.action
[menu __main,__print ercf tools T1]
name: {{ gettext('T1') }}
icon: ercf_t1
method: printer.gcode.script
params: { "script":"ERCF_CHANGE_TOOL TOOL=1 QUIET=1" }
enable: {{ (printer.ercf.tool != 1 or (printer.ercf.tool == 1 and printer.ercf.filament != "Loaded")) and printer.ercf.gate_status[1] != 0 and printer.ercf.action == "Idle" }}
show_disabled: True
refresh_on: printer.ercf.tool, printer.ercf.gate_status, printer.ercf.filament, printer.ercf.action
[menu __main,__print ercf tools T2]
name: {{ gettext('T2') }}
icon: ercf_t2
method: printer.gcode.script
params: { "script":"ERCF_CHANGE_TOOL TOOL=2 QUIET=1" }
enable: {{ (printer.ercf.tool != 2 or (printer.ercf.tool == 2 and printer.ercf.filament != "Loaded")) and printer.ercf.gate_status[2] != 0 and printer.ercf.action == "Idle" }}
show_disabled: True
refresh_on: printer.ercf.tool, printer.ercf.gate_status, printer.ercf.filament, printer.ercf.action
[menu __main,__print ercf tools T3]
name: {{ gettext('T3') }}
icon: ercf_t3
method: printer.gcode.script
params: { "script":"ERCF_CHANGE_TOOL TOOL=3 QUIET=1" }
enable: {{ (printer.ercf.tool != 3 or (printer.ercf.tool == 3 and printer.ercf.filament != "Loaded")) and printer.ercf.gate_status[3] != 0 and printer.ercf.action == "Idle" }}
show_disabled: True
refresh_on: printer.ercf.tool, printer.ercf.gate_status, printer.ercf.filament, printer.ercf.action
[menu __main,__print ercf tools T4]
name: {{ gettext('T4') }}
icon: ercf_t4
method: printer.gcode.script
params: { "script":"ERCF_CHANGE_TOOL TOOL=4 QUIET=1" }
enable: {{ (printer.ercf.tool != 4 or (printer.ercf.tool == 4 and printer.ercf.filament != "Loaded")) and printer.ercf.gate_status[4] != 0 and printer.ercf.action == "Idle" }}
show_disabled: True
refresh_on: printer.ercf.tool, printer.ercf.gate_status, printer.ercf.filament, printer.ercf.action
[menu __main,__print ercf tools T5]
name: {{ gettext('T5') }}
icon: ercf_t5
method: printer.gcode.script
params: { "script":"ERCF_CHANGE_TOOL TOOL=5 QUIET=1" }
enable: {{ (printer.ercf.tool != 5 or (printer.ercf.tool == 5 and printer.ercf.filament != "Loaded")) and printer.ercf.gate_status[5] != 0 and printer.ercf.action == "Idle" }}
show_disabled: True
refresh_on: printer.ercf.tool, printer.ercf.gate_status, printer.ercf.filament, printer.ercf.action
[menu __main,__print ercf tools T6]
name: {{ gettext('T6') }}
icon: ercf_t6
method: printer.gcode.script
params: { "script":"ERCF_CHANGE_TOOL TOOL=6 QUIET=1" }
enable: {{ (printer.ercf.tool != 6 or (printer.ercf.tool == 6 and printer.ercf.filament != "Loaded")) and printer.ercf.gate_status[6] != 0 and printer.ercf.action == "Idle" }}
show_disabled: True
refresh_on: printer.ercf.tool, printer.ercf.gate_status, printer.ercf.filament, printer.ercf.action
[menu __main,__print ercf tools T7]
name: {{ gettext('T7') }}
icon: ercf_t7
method: printer.gcode.script
params: { "script":"ERCF_CHANGE_TOOL TOOL=7 QUIET=1" }
enable: {{ (printer.ercf.tool != 7 or (printer.ercf.tool == 7 and printer.ercf.filament != "Loaded")) and printer.ercf.gate_status[7] != 0 and printer.ercf.action == "Idle" }}
show_disabled: True
refresh_on: printer.ercf.tool, printer.ercf.gate_status, printer.ercf.filament, printer.ercf.action
[menu __main,__print ercf tools T8]
name: {{ gettext('T8') }}
icon: ercf_t8
method: printer.gcode.script
params: { "script":"ERCF_CHANGE_TOOL TOOL=8 QUIET=1" }
enable: {{ (printer.ercf.tool != 8 or (printer.ercf.tool == 8 and printer.ercf.filament != "Loaded")) and printer.ercf.gate_status[8] != 0 and printer.ercf.action == "Idle" }}
show_disabled: True
refresh_on: printer.ercf.tool, printer.ercf.gate_status, printer.ercf.filament, printer.ercf.action

# Example: to just select the tool (not load)
#[menu __main,__print ercf select_tools]
#name: {{ gettext('Select Tool...') }}
#icon: extruder
#enable: {{ printer.idle_timeout.state != "Printing" }}
#show_disabled: True
#refresh_on: printer.idle_timeout.state
#
#ERCF_iter_select_tools

[menu __main,__print ercf select_gates]
name: {{ gettext('Select Gate...') }}
icon: ercf_select_gate
enable: {{ printer.idle_timeout.state != "Printing" }}
show_disabled: True
refresh_on: printer.idle_timeout.state

[menu __main,__print ercf select_gates bypass}]
name: {{ gettext('Select Bypass') }}
icon: ercf_select_bypass
method: printer.gcode.script
params: {"script":"ERCF_SELECT_BYPASS"}
enable: {{ printer.ercf.gate != -2 and printer.ercf.action == "Idle" }}
show_disabled: True
refresh_on: printer.ercf.gate, printer.ercf.action

# Generated menus for each tool/gate...
[menu __main,__print ercf select_gates G0]
name: {{ gettext('Select Gate #0') }}
icon: ercf_select_gate
method: printer.gcode.script
params: { "script":"ERCF_SELECT GATE=0" }
enable: {{ printer.ercf.gate != 0 and printer.ercf.action == "Idle" }}
show_disabled: True
refresh_on: printer.ercf.gate, printer.ercf.action
[menu __main,__print ercf select_gates G1]
name: {{ gettext('Select Gate #1') }}
icon: ercf_select_gate
method: printer.gcode.script
params: { "script":"ERCF_SELECT GATE=1" }
enable: {{ printer.ercf.gate != 1 and printer.ercf.action == "Idle" }}
show_disabled: True
refresh_on: printer.ercf.gate, printer.ercf.action
[menu __main,__print ercf select_gates G2]
name: {{ gettext('Select Gate #2') }}
icon: ercf_select_gate
method: printer.gcode.script
params: { "script":"ERCF_SELECT GATE=2" }
enable: {{ printer.ercf.gate != 2 and printer.ercf.action == "Idle" }}
show_disabled: True
refresh_on: printer.ercf.gate, printer.ercf.action
[menu __main,__print ercf select_gates G3]
name: {{ gettext('Select Gate #3') }}
icon: ercf_select_gate
method: printer.gcode.script
params: { "script":"ERCF_SELECT GATE=3" }
enable: {{ printer.ercf.gate != 3 and printer.ercf.action == "Idle" }}
show_disabled: True
refresh_on: printer.ercf.gate, printer.ercf.action
[menu __main,__print ercf select_gates G4]
name: {{ gettext('Select Gate #4') }}
icon: ercf_select_gate
method: printer.gcode.script
params: { "script":"ERCF_SELECT GATE=4" }
enable: {{ printer.ercf.gate != 4 and printer.ercf.action == "Idle" }}
show_disabled: True
refresh_on: printer.ercf.gate, printer.ercf.action
[menu __main,__print ercf select_gates G5]
name: {{ gettext('Select Gate #5') }}
icon: ercf_select_gate
method: printer.gcode.script
params: { "script":"ERCF_SELECT GATE=5" }
enable: {{ printer.ercf.gate != 5 and printer.ercf.action == "Idle" }}
show_disabled: True
refresh_on: printer.ercf.gate, printer.ercf.action
[menu __main,__print ercf select_gates G6]
name: {{ gettext('Select Gate #6') }}
icon: ercf_select_gate
method: printer.gcode.script
params: { "script":"ERCF_SELECT GATE=6" }
enable: {{ printer.ercf.gate != 6 and printer.ercf.action == "Idle" }}
show_disabled: True
refresh_on: printer.ercf.gate, printer.ercf.action
[menu __main,__print ercf select_gates G7]
name: {{ gettext('Select Gate #7') }}
icon: ercf_select_gate
method: printer.gcode.script
params: { "script":"ERCF_SELECT GATE=7" }
enable: {{ printer.ercf.gate != 7 and printer.ercf.action == "Idle" }}
show_disabled: True
refresh_on: printer.ercf.gate, printer.ercf.action
[menu __main,__print ercf select_gates G8]
name: {{ gettext('Select Gate #8') }}
icon: ercf_select_gate
method: printer.gcode.script
params: { "script":"ERCF_SELECT GATE=8" }
enable: {{ printer.ercf.gate != 8 and printer.ercf.action == "Idle" }}
show_disabled: True
refresh_on: printer.ercf.gate, printer.ercf.action

#[menu __main,__print ercf enable_endless_spool]
#name: {{ gettext('Enable E.Spool') }}
#icon: ercf_enable_endless_spool
#method: printer.gcode.script
#params: {"script":"ERCF_ENDLESS_SPOOL ENABLE=1"}
#enable: {{ printer.ercf.endless_spool == 0 }}
#show_disabled: True
#refresh_on: printer.ercf.endless_spool
#
#[menu __main,__print ercf disable_endless_spool]
#name: {{ gettext('Disable E.Spool') }}
#icon: ercf_disable_endless_spool
#method: printer.gcode.script
#params: {"script":"ENDLESS_SPOOL ENABLE=0"}
#enable: {{ printer.ercf.endless_spool == 1 }}
#show_disabled: True
#refresh_on: printer.ercf.endless_spool

[menu __main,__print ercf status]
name: {{ gettext('Display Status') }}
icon: info
method: printer.gcode.script
params: {"script":"ERCF_STATUS"}
enable: {{ printer.ercf.action == "Idle" }}
show_disabled: True
refresh_on: printer.ercf.action

[menu __main,__print ercf print]
name: {{ gettext('Print Stats') }}
icon: ercf_status
method: printer.gcode.script
params: {"script":"ERCF_DUMP_STATS"}
enable: {{ printer.ercf.action == "Idle" }}
show_disabled: True
refresh_on: printer.ercf.action

[menu __main,__print ercf reset]
name: {{ gettext('Reset Stats') }}
icon: ercf_stats_reset
method: printer.gcode.script
confirm: Are you sure you want to reset ERCF statistics?
params: {"script":"ERCF_RESET_STATS"}
enable: {{ printer.ercf.action == "Idle" }}
show_disabled: True
refresh_on: printer.ercf.action

# Example: User added ...
[menu __main,__print ercf spare1]
name: {{ gettext('user def') }}
icon: ercf_carrot
enable: False
show_disabled: False

# Examples: for basic management
#[menu __main,__print ercf home]
#name: {{ gettext('Home Selector') }}
#icon: home
#method: printer.gcode.script
#params: {"script":"ERCF_HOME"}
#
#[menu __main,__print ercf servoup]
#name: {{ gettext('Servo UP') }}
#icon: arrow-up
#method: printer.gcode.script
#params: {"script":"ERCF_SERVO_UP"}
#enable: {{ printer.ercf.servo != "Up" }}
#show_disabled: True
#refresh_on: printer.ercf.servo
#
#[menu __main,__print ercf servodown]
#name: {{ gettext('Servo Down') }}
#icon: arrow-down
#method: printer.gcode.script
#params: {"script":"ERCF_SERVO_DOWN"}
#enable: {{ printer.ercf.servo != "Down" }}
#show_disabled: True
#refresh_on: printer.ercf.servo
#
#[menu __main,__print ercf motoroff]
#name: {{ gettext('Disable Motors') }}
#icon: motor-off
#method: printer.gcode.script
#confirm: "This will invalidate selector position and require rehoming. Are you sure?"
#params: {"script":"ERCF_MOTORS_OFF"}
#
# ---------- ERCF Manage submenu end


# ---------- ERCF config/calibration menu
#
[menu __main config ercf_calib]
name: {{ gettext('ERCF Settings') }}
icon: ercf_gear
enable: {{ printer.ercf is defined }}

[menu __main config ercf_calib home]
name: {{ gettext('Home') }}
icon: home
method: printer.gcode.script
params: {"script":"ERCF_HOME"}

[menu __main config ercf_calib select_gates]
name: {{ gettext('Select Gate...') }}
icon: ercf_select_gate

# Generated menus for each tool/gate...
[menu __main config ercf_calib select_gates G0]
name: {{ gettext('Select Gate #0') }}
icon: ercf_select_gate
method: printer.gcode.script
params: { "script":"ERCF_SELECT GATE=0" }
enable: {{ printer.ercf.gate != 0 and printer.ercf.action == "Idle" }}
show_disabled: True
refresh_on: printer.ercf.gate, printer.ercf.action
[menu __main config ercf_calib select_gates G1]
name: {{ gettext('Select Gate #1') }}
icon: ercf_select_gate
method: printer.gcode.script
params: { "script":"ERCF_SELECT GATE=1" }
enable: {{ printer.ercf.gate != 1 and printer.ercf.action == "Idle" }}
show_disabled: True
refresh_on: printer.ercf.gate, printer.ercf.action
[menu __main config ercf_calib select_gates G2]
name: {{ gettext('Select Gate #2') }}
icon: ercf_select_gate
method: printer.gcode.script
params: { "script":"ERCF_SELECT GATE=2" }
enable: {{ printer.ercf.gate != 2 and printer.ercf.action == "Idle" }}
show_disabled: True
refresh_on: printer.ercf.gate, printer.ercf.action
[menu __main config ercf_calib select_gates G3]
name: {{ gettext('Select Gate #3') }}
icon: ercf_select_gate
method: printer.gcode.script
params: { "script":"ERCF_SELECT GATE=3" }
enable: {{ printer.ercf.gate != 3 and printer.ercf.action == "Idle" }}
show_disabled: True
refresh_on: printer.ercf.gate, printer.ercf.action
[menu __main config ercf_calib select_gates G4]
name: {{ gettext('Select Gate #4') }}
icon: ercf_select_gate
method: printer.gcode.script
params: { "script":"ERCF_SELECT GATE=4" }
enable: {{ printer.ercf.gate != 4 and printer.ercf.action == "Idle" }}
show_disabled: True
refresh_on: printer.ercf.gate, printer.ercf.action
[menu __main config ercf_calib select_gates G5]
name: {{ gettext('Select Gate #5') }}
icon: ercf_select_gate
method: printer.gcode.script
params: { "script":"ERCF_SELECT GATE=5" }
enable: {{ printer.ercf.gate != 5 and printer.ercf.action == "Idle" }}
show_disabled: True
refresh_on: printer.ercf.gate, printer.ercf.action
[menu __main config ercf_calib select_gates G6]
name: {{ gettext('Select Gate #6') }}
icon: ercf_select_gate
method: printer.gcode.script
params: { "script":"ERCF_SELECT GATE=6" }
enable: {{ printer.ercf.gate != 6 and printer.ercf.action == "Idle" }}
show_disabled: True
refresh_on: printer.ercf.gate, printer.ercf.action
[menu __main config ercf_calib select_gates G7]
name: {{ gettext('Select Gate #7') }}
icon: ercf_select_gate
method: printer.gcode.script
params: { "script":"ERCF_SELECT GATE=7" }
enable: {{ printer.ercf.gate != 7 and printer.ercf.action == "Idle" }}
show_disabled: True
refresh_on: printer.ercf.gate, printer.ercf.action
[menu __main config ercf_calib select_gates G8]
name: {{ gettext('Select Gate #8') }}
icon: ercf_select_gate
method: printer.gcode.script
params: { "script":"ERCF_SELECT GATE=8" }
enable: {{ printer.ercf.gate != 8 and printer.ercf.action == "Idle" }}
show_disabled: True
refresh_on: printer.ercf.gate, printer.ercf.action

[menu __main config ercf_calib grip]
name: {{ gettext('Test Grip') }}
icon: ercf_grip
method: printer.gcode.script
params: {"script":"ERCF_TEST_GRIP"}

[menu __main config ercf_calib formtip]
name: {{ gettext('Form Tip') }}
icon: ercf_formtip
method: printer.gcode.script
params: {"script":"ERCF_FORM_TIP_STANDALONE FINAL_EJECT=1"}

[menu __main config ercf_calib servoup]
name: {{ gettext('Servo UP') }}
icon: arrow-up
method: printer.gcode.script
params: {"script":"ERCF_SERVO_UP"}
enable: {{ printer.ercf.servo != "Up" }}
show_disabled: True
refresh_on: printer.ercf.servo

[menu __main config ercf_calib servodown]
name: {{ gettext('Servo DOWN') }}
icon: arrow-down
method: printer.gcode.script
params: {"script":"ERCF_SERVO_DOWN"}
enable: {{ printer.ercf.servo != "Down" }}
show_disabled: True
refresh_on: printer.ercf.servo

[menu __main config ercf_calib encoder]
name: {{ gettext('Encoder') }}
icon: ercf_encodercal
method: printer.gcode.script
params: {"script":"ERCF_CALIBRATE_ENCODER"}

[menu __main config ercf_calib all]
name: {{ gettext('Calibrate ALL') }}
icon: extruder
method: printer.gcode.script
confirm: This will calibrate all gates. Are you sure?
params: {"script":"ERCF_CALIBRATE"}

[menu __main config ercf_calib tool]
name: {{ gettext('Cal Tool...') }}
icon: ercf_calibrate

# Generated menus for each tool/gate...
[menu __main config ercf_calib tool CT0]
name: {{ gettext('Calibrate T0') }}
icon: ercf_calibrate
method: printer.gcode.script
params: { "script":"ERCF_CALIBRATE_SINGLE TOOL=0" }
[menu __main config ercf_calib tool CT1]
name: {{ gettext('Calibrate T1') }}
icon: ercf_calibrate
method: printer.gcode.script
params: { "script":"ERCF_CALIBRATE_SINGLE TOOL=1" }
[menu __main config ercf_calib tool CT2]
name: {{ gettext('Calibrate T2') }}
icon: ercf_calibrate
method: printer.gcode.script
params: { "script":"ERCF_CALIBRATE_SINGLE TOOL=2" }
[menu __main config ercf_calib tool CT3]
name: {{ gettext('Calibrate T3') }}
icon: ercf_calibrate
method: printer.gcode.script
params: { "script":"ERCF_CALIBRATE_SINGLE TOOL=3" }
[menu __main config ercf_calib tool CT4]
name: {{ gettext('Calibrate T4') }}
icon: ercf_calibrate
method: printer.gcode.script
params: { "script":"ERCF_CALIBRATE_SINGLE TOOL=4" }
[menu __main config ercf_calib tool CT5]
name: {{ gettext('Calibrate T5') }}
icon: ercf_calibrate
method: printer.gcode.script
params: { "script":"ERCF_CALIBRATE_SINGLE TOOL=5" }
[menu __main config ercf_calib tool CT6]
name: {{ gettext('Calibrate T6') }}
icon: ercf_calibrate
method: printer.gcode.script
params: { "script":"ERCF_CALIBRATE_SINGLE TOOL=6" }
[menu __main config ercf_calib tool CT7]
name: {{ gettext('Calibrate T7') }}
icon: ercf_calibrate
method: printer.gcode.script
params: { "script":"ERCF_CALIBRATE_SINGLE TOOL=7" }
[menu __main config ercf_calib tool CT8]
name: {{ gettext('Calibrate T8') }}
icon: ercf_calibrate
method: printer.gcode.script
params: { "script":"ERCF_CALIBRATE_SINGLE TOOL=8" }
#
# ---------- ERCF config/calibration end