| layout | title | permalink |
|---|---|---|
page |
Q175983: PRB: Extra Menu Pad Added if Modal Screen Called 31 Times |
/kb/175/Q175983/ |
{% raw %}
Article: Q175983
Product(s): Microsoft FoxPro
Version(s): WINDOWS:2.5,2.5a,2.5b,2.6,2.6a,3.0,3.0b,5.0,5.0a,6.0
Operating System(s):
Keyword(s): kbvfp kbvfp300 kbvfp300b kbvfp500 kbvfp500a kbvfp600
Last Modified: 11-DEC-1999
-------------------------------------------------------------------------------
The information in this article applies to:
- Microsoft Visual FoxPro for Windows, versions 3.0, 3.0b, 5.0, 5.0a, 6.0
- Microsoft FoxPro for Windows, versions 2.5, 2.5a, 2.5b, 2.6, 2.6a
-------------------------------------------------------------------------------
SYMPTOMS
========
In Visual FoxPro for Windows or in FoxPro for Windows 2.x, specific
circumstances make an additional menu pad appear, that causes unpredictable
problems if the menu pad is selected.
The additional menu pad is a duplicate of the next-to-last menu pad.
All of the following circumstances have been noted to exist when this condition
occurs:
- Menu pads have a SKIP FOR condition to disable them.
- More than six menu pads with five characters in each pad are required.
- A MODAL screen is being displayed when the extra menu pad appears.
- The problem occurs only if a screen is activated by a READ MODAL that is
being called from within a DO WHILE loop.
- The extra menu pad appears on the 31st time the MODAL screen is called.
- If you exit the program, without exiting FoxPro, and then rerun the program,
the number of times that the MODAL screen must be called before the extra
menu pad is displayed decrements by one. Then, during this second running of
the program, the extra menu pad appears during the 30th appearance of the
MODAL screen. In a multi-user environment, this creates a random appearance
of the extra menu pad.
This problem does not occur in FoxPro for DOS.
CAUSE
=====
This behavior appears to be caused by a combination of the looping of the MODAL
READ (screen) and the SKIP FOR conditions on the menu pads.
RESOLUTION
==========
A workaround is to call the Menu.mpr program again at the end of the DO loop, so
that the last line of code in the Main.prg before the ENDDO is:
DO Testmnu.mpr
This additional calling of the menu has the effect of re-setting whatever
internal counter is causing the extra menu to appear on the 31st run of the
MODAL screen. However, in a multi-user environment this workaround may not
prevent the behavior.
STATUS
======
Microsoft has confirmed this to be a problem in the Microsoft products listed at
the beginning of this article.
MORE INFORMATION
================
Steps to Reproduce Behavior
---------------------------
Included below are three sample programs, Main.prg, Testmnu.mpr, and
Testapp.spr.
Main.prg is the initial calling program that calls the sample menu allowing the
selection of a menu pad that calls the sample modal screen. Testmnu.mpr is a
sample menu and Testapp.spr is a sample modal screen.
1. Select the text below from the comment box that identifies the beginning of
Main.prg to the comment box that identifies the end of Main.prg and press
CTRL+C, or you may click COPY on the Edit menu.
2. In the FoxPro Command window, type the following command:
MODIFY COMMAND Main.prg
3. You will see a new program window. Press CTRL+V or click PASTE on the Edit
menu, and then save the program.
4. Repeat steps 1-3 for the two other programs Testmnu.mpr and Testapp.spr.
5. In the FoxPro Command window, type the following command:
DO main.prg
6. On the application's main menu, click the Test Bar pad from the Test Pad 1
menu or press ALT+T. This displays a modal screen that has an Exit command
button. Notice that the menu pads, with the exception of the Exit menu pad,
are disabled and cannot be selected. Also notice that the "Menu hit count" is
displayed on the FoxPro desktop.
7. Click the Exit button on the modal screen, or press ALT+E. Note that the menu
pads are again enabled.
8. Repeat steps 6 - 7 until the "Menu hit count" display reaches 30.
9. Repeat step 6 to call the modal screen once more. While it is being
displayed, notice that a second pad named Test Pad 7, has been added to the
end of the other menu pads (prior to the Exit pad) and that unlike the other
menu pads, it seems to be enabled. However, if selected, Test Pad 7 has no
menu choices and sometimes causes erratic menu behavior.
* *********************************************************
* *
* * 10/20/97 Main.prg 16:46:24
* *
* *********************************************************
* *
* * Description:
* * This main program is one of three sample programs that
* * illustrates the problem of an extra menu pad appearing
* * during the 31st display of a MODAL screen.
* *
* *********************************************************
CLEAR
ll_fread = .f.
lc_pad = ""
ln_bar = 0
lc_choice = ""
m0sysoff = .f.
ln_count = 0
PUSH MENU _msysmenu
DO TESTMNU.MPR
DO WHILE .T.
ll_fread = .f.
READ VALID ll_fread
ll_fread = .t.
DO CASE
CASE UPPER(lc_pad) = "TEST BAR"
ln_count = ln_count + 1
@ 2, 35 SAY "Menu hit count " + STR(ln_count)
DO TESTAPP.SPR
CASE UPPER(lc_pad) = "QUIT TO FOXPRO"
CLEAR
RELEASE ln_count
EXIT
ENDCASE
ENDDO
POP MENU _msysmenu
RETURN
PROCEDURE l_actmnu
PARAMETERS lc_parm1
ll_fread = .t.
CLEAR READ
lc_bar = BAR()
lc_pad = lc_parm1
RETURN
* *********************************************************
* *
* * END OF Main.prg
* *
* *********************************************************
* *********************************************************
* *
* * 10/20/97 Testmnu.mpr 16:46:24
* *
* *********************************************************
* *
* * Description:
* * This menu program is one of three sample programs to
* * illustrate the problem of an extra menu pad appearing
* * during the 31st display of a MODAL screen.
* *
* *********************************************************
SET SYSMENU TO
SET SYSMENU AUTOMATIC
DEFINE PAD tp1 OF _MSYSMENU PROMPT "Test Pad \<1" ;
COLOR SCHEME 3 ;
KEY ALT+1, "ALT+1" ;
SKIP FOR m0sysoff
DEFINE PAD tp2 OF _MSYSMENU PROMPT "Test Pad 2" ;
COLOR SCHEME 3 ;
SKIP FOR m0sysoff
DEFINE PAD tp3 OF _MSYSMENU PROMPT "Test Pad 3" ;
COLOR SCHEME 3 ;
SKIP FOR m0sysoff
DEFINE PAD tp4 OF _MSYSMENU PROMPT "Test Pad 4" ;
COLOR SCHEME 3 ;
SKIP FOR m0sysoff
DEFINE PAD tp5 OF _MSYSMENU PROMPT "Test Pad 5" ;
COLOR SCHEME 3 ;
SKIP FOR m0sysoff
DEFINE PAD tp6 OF _MSYSMENU PROMPT "Test Pad 6" ;
COLOR SCHEME 3 ;
SKIP FOR m0sysoff
DEFINE PAD tp7 OF _MSYSMENU PROMPT "Test Pad 7" ;
COLOR SCHEME 3 ;
SKIP FOR m0sysoff
DEFINE PAD exitpad OF _MSYSMENU PROMPT "\<Exit" ;
COLOR SCHEME 3 ;
KEY ALT+E, "ALT+E"
ON PAD tp1 OF _MSYSMENU ACTIVATE POPUP testpad1
ON PAD exitpad OF _MSYSMENU ACTIVATE POPUP exit
DEFINE POPUP testpad1 MARGIN RELATIVE SHADOW COLOR SCHEME 4
DEFINE BAR 1 OF testpad1 PROMPT "\<Test Bar" ;
KEY ALT+T, "Alt+T"
DEFINE BAR 2 OF testpad1 PROMPT "test1"
ON SELECTION BAR 1 OF testpad1 DO l_actmnu WITH PROMPT()
DEFINE POPUP exit MARGIN RELATIVE SHADOW COLOR SCHEME 4
DEFINE BAR 1 OF exit PROMPT "Quit to Foxpro"
DEFINE BAR 2 OF exit PROMPT "Do something else 1"
DEFINE BAR 3 OF exit PROMPT "Do something else 2"
ON SELECTION BAR 1 OF exit DO l_actmnu WITH PROMPT()
* *********************************************************
* *
* * END OF Testmnu.mpr
* *
* *********************************************************
* *********************************************************
* *
* * 10/20/97 TESTAPP.SPR 16:46:24
* *
* *********************************************************
* *
* * Description:
* * This screen program is one of three sample programs that
* * illustrates the problem of an extra menu pad appearing
* * during the 31st display of a MODAL screen.
* *
* *********************************************************
DEFINE WINDOW test ;
AT 0.000, 0.000 ;
SIZE 15.846,92.600 ;
FONT "MS Sans Serif", 8 ;
FLOAT ;
NOCLOSE ;
MINIMIZE ;
SYSTEM
MOVE WINDOW test CENTER
#REGION 1
m0sysoff = .t.
#REGION 1
IF WVISIBLE("test")
ACTIVATE WINDOW test SAME
ELSE
ACTIVATE WINDOW test NOSHOW
ENDIF
@ 12.000,36.800 GET lc_choice ;
PICTURE "@*HN \<Exit" ;
SIZE 1.8,10.000,1.0 ;
DEFAULT 1 ;
FONT "MS Sans Serif", 8 ;
STYLE "B" ;
VALID lc_val()
IF NOT WVISIBLE("test")
ACTIVATE WINDOW test
ENDIF
READ CYCLE MODAL
RELEASE WINDOW test
#REGION 1
m0sysoff = .f.
FUNCTION lc_val && lc_choice VALID
CLEAR READ
RETURN
* * END OF Testapp.spr
(c) Microsoft Corporation 1998, All Rights Reserved.
Contributions by Perry Newton, Microsoft Corporation
Additional query words:
======================================================================
Keywords : kbvfp kbvfp300 kbvfp300b kbvfp500 kbvfp500a kbvfp600
Technology : kbVFPsearch kbAudDeveloper kbFoxproSearch kbFoxPro260 kbFoxPro250 kbFoxPro250a kbFoxPro250b kbFoxPro260a kbVFP300 kbVFP300b kbVFP500 kbVFP600 kbVFP500a
Version : WINDOWS:2.5,2.5a,2.5b,2.6,2.6a,3.0,3.0b,5.0,5.0a,6.0
Issue type : kbprb
=============================================================================
{% endraw %}