From 6dfc5a2d4bef9a3945a849893c8e29efa00876aa Mon Sep 17 00:00:00 2001 From: John Clark Date: Sun, 13 Aug 2023 13:15:17 -0400 Subject: [PATCH] update for v12.0.2 release Signed-off-by: John Clark --- README.md | 22 +++++++++++----------- 1 file changed, 11 insertions(+), 11 deletions(-) diff --git a/README.md b/README.md index ce3580b..54acf5c 100644 --- a/README.md +++ b/README.md @@ -14,8 +14,8 @@ If you want to run true up-stream Debian Linux on your ARM64 device, this is the **1. download the appropriate image** ``` -(R5C) wget https://github.com/inindev/nanopi-r5/releases/download/v12.0.1/nanopi-r5c_bookworm-1201.img.xz -(R5S) wget https://github.com/inindev/nanopi-r5/releases/download/v12.0.1/nanopi-r5s_bookworm-1201.img.xz +(R5C) wget https://github.com/inindev/nanopi-r5/releases/download/v12.0.2/nanopi-r5c_bookworm-1202.img.xz +(R5S) wget https://github.com/inindev/nanopi-r5/releases/download/v12.0.2/nanopi-r5s_bookworm-1202.img.xz ```
@@ -39,7 +39,7 @@ brw-rw---- 1 root disk 8, 0 Mar 19 21:08 /dev/sda **3. in the case above, substitute 'a' for 'X' in the command below (for /dev/sda)** ``` -sudo sh -c 'xzcat nanopi-r5s_bookworm-1201.img.xz > /dev/sdX && sync' +sudo sh -c 'xzcat nanopi-r5s_bookworm-1202.img.xz > /dev/sdX && sync' ``` #### when the micro sd has finished imaging, eject and use it to boot the nanopi r5c or r5s to finish setup @@ -110,10 +110,10 @@ Using the steps in the first section above, create a removable MMC card and boot **2. download the appropriate image to the booted MMC card and image the internal eMMC** ``` -(R5C) wget https://github.com/inindev/nanopi-r5/releases/download/v12.0.1/nanopi-r5c_bookworm-1201.img.xz -(R5S) wget https://github.com/inindev/nanopi-r5/releases/download/v12.0.1/nanopi-r5s_bookworm-1201.img.xz +(R5C) wget https://github.com/inindev/nanopi-r5/releases/download/v12.0.2/nanopi-r5c_bookworm-1202.img.xz +(R5S) wget https://github.com/inindev/nanopi-r5/releases/download/v12.0.2/nanopi-r5s_bookworm-1202.img.xz sudo su -xzcat nanopi-r5s_bookworm-1201.img.xz > /dev/mmcblk1 +xzcat nanopi-r5s_bookworm-1202.img.xz > /dev/mmcblk1 ```
@@ -141,10 +141,10 @@ Using the steps in the first section above, create a removable MMC card and boot **2. download the appropriate image to the booted MMC card and image the internal NVMe** ``` -(R5C) wget https://github.com/inindev/nanopi-r5/releases/download/v12.0.1/nanopi-r5c_bookworm-1201.img.xz -(R5S) wget https://github.com/inindev/nanopi-r5/releases/download/v12.0.1/nanopi-r5s_bookworm-1201.img.xz +(R5C) wget https://github.com/inindev/nanopi-r5/releases/download/v12.0.2/nanopi-r5c_bookworm-1202.img.xz +(R5S) wget https://github.com/inindev/nanopi-r5/releases/download/v12.0.2/nanopi-r5s_bookworm-1202.img.xz sudo su -xzcat nanopi-r5s_bookworm-1201.img.xz > /dev/nvme0n1 +xzcat nanopi-r5s_bookworm-1202.img.xz > /dev/nvme0n1 ```
@@ -153,8 +153,8 @@ xzcat nanopi-r5s_bookworm-1201.img.xz > /dev/nvme0n1 The last step is to prepare the internal eMMC to host u-boot. The eMMC must not contain a bootable partition or it will be preferred for boot over the internal NVMe. Start by downloading the two u-boot files: ``` -wget https://github.com/inindev/nanopi-r5/releases/download/v12.0.1/idbloader-r5s.img -wget https://github.com/inindev/nanopi-r5/releases/download/v12.0.1/u-boot-r5s.itb +wget https://github.com/inindev/nanopi-r5/releases/download/v12.0.2/idbloader-r5s.img +wget https://github.com/inindev/nanopi-r5/releases/download/v12.0.2/u-boot-r5s.itb ``` Erase the internal eMMC (the device is actually ```/dev/mmcblk1``` but X is placed where 1 belongs to prevent a copy paste mistake)