Skip to content

Latest commit

 

History

History
35 lines (28 loc) · 2.44 KB

README.md

File metadata and controls

35 lines (28 loc) · 2.44 KB
Raw

Passive_modules

This is a passive outboard device for modular synths and can be used a "bare"PCB. It can be produced by submitting the Gerber file for PCB to a production company in China.

    • Some of the products are Eurorack-standard.

DiodeORLogic

  • This is a simple circuit mainly for mixing GATE/TRIGGER.
  • It is 8in and 1out.
  • P&P file and BOM are included so that you can use SMT assembly with JLCPCB etc.
  • I use a 3.5mm stereo jack called PJ311. Unnecessary pins for stereo are floated. If you need a large quantity, you can purchase it from Aliexpress under the part number PJ342.
  • It has actually been manufactured and is working well.

Passive multiple

  • It was not actually manufactured. There is no guarantee of operation at this time.
  • I use a 3.5mm stereo jack called PJ311. Unnecessary pins for stereo are floated. If you need a large quantity, you can purchase it from Aliexpress under the part number PJ342.

2hp switched multiple

  • This is actually inspired by the Switched Multiple in "Extralife".MUST BE WATCH
  • This is data for Eurorack format panels only; when submitting to PCB Fab, it is recommended that they be manufactured in aluminum sheet.
  • EASY!

micro passive multiple

  • This is an alternative to stackable cables. It is a PCB with only 3 TIPs and GND connected.
  • It was not actually manufactured. There is no guarantee of operation at this time.
  • I use a 3.5mm stereo jack called PJ311. Unnecessary pins for stereo are floated. If you need a large quantity, you can purchase it from Aliexpress under the part number PJ342.