This is a collection of commonly used TouchDesigner components
ActivityMon Allows for CHOP data to be registered as activity over time. This could be movement, audio, etc.
DMX_Out_Artnet This sends out data to Artnet. You can define the IP of the artnet controller and the universe. If you have multiple fixtures, please add a "merge" CHOP to merge the channels to a single stream.
Elation_DLED_Zoom Enables you to control the parameters of the Elation Zoom Par and gives visual feedback of the current color. set the DMX adress and feed the resulting channel data to a DMX output. this has 6 CHOP inputs (Int,R,G,B,Strobe,Zoom)
ETC_Colorsource_Par Enables you to control the parameters of the ETC Colorsource PAR and gives visual feedback of the current color. set the DMX adress and feed the resulting channel data to a DMX output. this has 6 CHOP inputs (Int,R,G,B,Strobe)
RadiusCheck Creates a virtual point in 3D space and checks the relation between input XYZ. Set the radius in metres Set the XYZ location feed it a live location (XYZ) Outputs Percentage within the radius Outputs InsideBounds Outputs Distance in Metres
RigidBodyOsc Receiver Restructures the incoming OSC data coming from the OSCNatnetBridge / Optitrack system input the OSC port number input the RigidBody Name outputs the osc data in an understandable format.
SkeletonOsc Receiver Restructures the incoming OSC data coming from the OSCNatnetBridge / Optitrack system input the OSC port number input the Skeleton Name optional: select Joint outputs the osc data in an understandable format. note: Can be used to target FBX rigged models from mixamo. Make sure you enter the correct mixamo base name, joint names and make sure the joints are unlinked (moving in world space not relative space)
V_1HD_Control communicates with the Roland V-1HD video mixer over MIDI/USB you can manipulate most functions.