This is the easiest way to get started with programming your hexbright.
-
Download and install arduino and the CP210x driver (Use a VCP Driver Kit from here). Most linux kernels come with the driver pre-built.
-
Download this folder using one of these methods, accessible at the top of the project page.
- Clone in Windows/Mac This is an easy way to keep an up-to-date version of the code.
- ZIP Extremely easy to get started, but you will need to manually update the project.
- git clone [email protected]:dhiltonp/hexbright.git Command line, read-only access.
- Fork Click fork to generate your own copy of the project if at some point you will want to submit or share your code.
-
Open the arduino ide, and click on 'File'->'Preferences' in the menu.
-
Set your sketchbook location to the location of this folder (where this README file is found).
-
Restart arduino.
-
In arduino, click on 'Tools'->'Board'->'Hexbright' as your device type.
-
With your hexbright unplugged, go to 'Tools'->'Serial Port' and look at the options.
-
Now plug in your hexbright and go to 'Tools'->'Serial Port'. Select the new option. (On linux, there may be a delay of over a minute before the device appears.)
-
Underneath the 'Sketch' and 'Tools' menu options, there is an up arrow (to open a program). Click on it, go to 'programs', and select a program.
-
'temperature_calibration' is one of the simplest programs you could write.
-
'functional' is a basic example of how a program might have multiple modes.
-
'down_light' contains an example of using the accelerometer.
-
libraries/hexbright/hexbright.h has a list of all available methods in the api, and is fairly well commented.
I have translated most of the original sample programs to the library here: https://github.com/dhiltonp/samples
Be aware that this library is a work in progress. In particular, the accelerometer api may change, and it is not yet optimized.
Enjoy!