tutorials 2021

[el-samiyel]

Hi any tutorials going in 2021? I tried to run the make file but I get the following:

`make -C arm7
make[1]: Entering directory '/opt/devkitpro/examples/nds/term/arm7'
template.c
linking term.arm7.elf
built ... term.arm7
make[1]: Leaving directory '/opt/devkitpro/examples/nds/term/arm7'
make -C arm9
make[1]: Entering directory '/opt/devkitpro/examples/nds/term/arm9'
bt.c
C:/devkitPro/examples/nds/term/arm9/source/bt.c: In function 'bt_scan':
C:/devkitPro/examples/nds/term/arm9/source/bt.c:317:5: warning: 'strncpy' output may be truncated copying 12 bytes from a string of length 47 [-Wstringop-truncation]
317 | strncpy(devices[num_devices].addr, line, 12);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
C:/devkitPro/examples/nds/term/arm9/source/bt.c:329:5: warning: 'strncpy' specified bound depends on the length of the source argument [-Wstringop-overflow=]
329 | strncpy(devices[num_devices].cod, end+1, strlen(end+1)-2);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
C:/devkitPro/examples/nds/term/arm9/source/bt.c:329:46: note: length computed here
329 | strncpy(devices[num_devices].cod, end+1, strlen(end+1)-2);
| ^~~~~~~~~~~~~
main.c
C:/devkitPro/examples/nds/term/arm9/source/main.c: In function 'main':
C:/devkitPro/examples/nds/term/arm9/source/main.c:77:11: warning: '~' on a boolean expression [-Wbool-operation]
77 | echo = ~echo;
| ^
C:/devkitPro/examples/nds/term/arm9/source/main.c:77:11: note: did you mean to use logical not?
77 | echo = ~echo;
| ^
| !
C:/devkitPro/examples/nds/term/arm9/source/main.c:83:24: warning: format '%u' expects argument of type 'unsigned int', but argument 2 has type 'uint32' {aka 'long unsigned int'} [-Wformat=]
83 | iprintf("\nsetting %u bps..", bps_list[bps_list_index]);
| ~^ ~~~~~~~~~~~~~~~~~~~~~~~~
| | |
| unsigned int uint32 {aka long unsigned int}
| %lu
C:/devkitPro/examples/nds/term/arm9/source/main.c:101:25: warning: format '%u' expects argument of type 'unsigned int', but argument 3 has type 'long unsigned int' [-Wformat=]
101 | sprintf(tmstr, "%010u", (uint32)tm);
| ~~~~^ ~~~~~~~~~~
| | |
| | long unsigned int
| unsigned int
| %010lu
C:/devkitPro/examples/nds/term/arm9/source/main.c:37:9: warning: variable 'spi_rate' set but not used [-Wunused-but-set-variable]
37 | uint32 spi_rate;
| ^~~~~~~~
C:/devkitPro/examples/nds/term/arm9/source/main.c:103:5: warning: 'strncpy' output truncated before terminating nul copying 4 bytes from a string of the same length [-Wstringop-truncation]
103 | strncpy(fn+8, ".log", 4);
| ^~~~~~~~~~~~~~~~~~~~~~~~
C:/devkitPro/examples/nds/term/arm9/source/main.c:102:5: warning: 'strncpy' output may be truncated copying 8 bytes from a string of length 8 [-Wstringop-truncation]
102 | strncpy(fn, tmstr+2, 8);
| ^~~~~~~~~~~~~~~~~~~~~~~
spi_driver.c
In file included from C:/devkitPro/libnds/include/nds.h:238,
from C:/devkitPro/examples/nds/term/arm9/source/spi_driver.c:12:
C:/devkitPro/libnds/include/nds/card.h:98:23: error: expected identifier before '(' token
98 | #define CARD_SPI_BUSY (1<<7)
| ^
C:/devkitPro/examples/nds/term/arm9/source/spi.h:20:3: note: in expansion of macro 'CARD_SPI_BUSY'
20 | CARD_SPI_BUSY = 1
| ^~~~~~~~~~~~~
In file included from C:/devkitPro/examples/nds/term/arm9/source/spi_driver.c:15:
C:/devkitPro/examples/nds/term/arm9/source/spi_driver.c: In function 'read_cardSPI':
C:/devkitPro/examples/nds/term/arm9/source/spi_internals.h:26:29: error: 'CARD_CR1' undeclared (first use in this function); did you mean 'CARD_WR'?
26 | #define CARD_SPI_BUSY_TEST (CARD_CR1 & CARD_SPI_BUSY_BIT)
| ^~~~~~~~
C:/devkitPro/examples/nds/term/arm9/source/spi_driver.c:64:9: note: in expansion of macro 'CARD_SPI_BUSY_TEST'
64 | if ( !CARD_SPI_BUSY_TEST) {
| ^~~~~~~~~~~~~~~~~~
C:/devkitPro/examples/nds/term/arm9/source/spi_internals.h:26:29: note: each undeclared identifier is reported only once for each function it appears in
26 | #define CARD_SPI_BUSY_TEST (CARD_CR1 & CARD_SPI_BUSY_BIT)
| ^~~~~~~~
C:/devkitPro/examples/nds/term/arm9/source/spi_driver.c:64:9: note: in expansion of macro 'CARD_SPI_BUSY_TEST'
64 | if ( !CARD_SPI_BUSY_TEST) {
| ^~~~~~~~~~~~~~~~~~
C:/devkitPro/examples/nds/term/arm9/source/spi_driver.c:65:18: error: 'CARD_EEPDATA' undeclared (first use in this function); did you mean 'CARD_SEC_DAT'?
65 | *read_byte = CARD_EEPDATA;
| ^~~~~~~~~~~~
| CARD_SEC_DAT
In file included from C:/devkitPro/examples/nds/term/arm9/source/spi_driver.c:15:
C:/devkitPro/examples/nds/term/arm9/source/spi_driver.c: In function 'readBlocking_cardSPI':
C:/devkitPro/examples/nds/term/arm9/source/spi_internals.h:26:29: error: 'CARD_CR1' undeclared (first use in this function); did you mean 'CARD_WR'?
26 | #define CARD_SPI_BUSY_TEST (CARD_CR1 & CARD_SPI_BUSY_BIT)
| ^~~~~~~~
C:/devkitPro/examples/nds/term/arm9/source/spi_internals.h:29:38: note: in expansion of macro 'CARD_SPI_BUSY_TEST'
29 | #define CARD_SPI_WAIT_IDLE() while ( CARD_SPI_BUSY_TEST);
| ^~~~~~~~~~~~~~~~~~
C:/devkitPro/examples/nds/term/arm9/source/spi_driver.c:86:3: note: in expansion of macro 'CARD_SPI_WAIT_IDLE'
86 | CARD_SPI_WAIT_IDLE();
| ^~~~~~~~~~~~~~~~~~
C:/devkitPro/examples/nds/term/arm9/source/spi_driver.c:88:16: error: 'CARD_EEPDATA' undeclared (first use in this function); did you mean 'CARD_SEC_DAT'?
88 | *read_byte = CARD_EEPDATA;
| ^~~~~~~~~~~~
| CARD_SEC_DAT
In file included from C:/devkitPro/examples/nds/term/arm9/source/spi_driver.c:15:
C:/devkitPro/examples/nds/term/arm9/source/spi_driver.c: In function 'write_cardSPI':
C:/devkitPro/examples/nds/term/arm9/source/spi_internals.h:26:29: error: 'CARD_CR1' undeclared (first use in this function); did you mean 'CARD_WR'?
26 | #define CARD_SPI_BUSY_TEST (CARD_CR1 & CARD_SPI_BUSY_BIT)
| ^~~~~~~~
C:/devkitPro/examples/nds/term/arm9/source/spi_driver.c:109:9: note: in expansion of macro 'CARD_SPI_BUSY_TEST'
109 | if ( !CARD_SPI_BUSY_TEST) {
| ^~~~~~~~~~~~~~~~~~
C:/devkitPro/examples/nds/term/arm9/source/spi_driver.c:121:5: error: 'CARD_EEPDATA' undeclared (first use in this function); did you mean 'CARD_SEC_DAT'?
121 | CARD_EEPDATA = byte;
| ^~~~~~~~~~~~
| CARD_SEC_DAT
C:/devkitPro/examples/nds/term/arm9/source/spi_driver.c: In function 'disable_cardSPI':
C:/devkitPro/examples/nds/term/arm9/source/spi_driver.c:186:3: error: 'CARD_CR1' undeclared (first use in this function); did you mean 'CARD_WR'?
186 | CARD_CR1 = 0;
| ^~~~~~~~
| CARD_WR
make[2]: *** [/opt/devkitpro/devkitARM/base_rules:85: spi_driver.o] Error 1
make[1]: *** [Makefile:99: build] Error 2
make[1]: Leaving directory '/opt/devkitpro/examples/nds/term/arm9'
make: *** [Makefile:35: arm9/term.elf] Error 2

C:\devkitPro\examples\nds\term>`

Cheers