Material
- Soldering station
- Solder wire
- Cutting plier
- Small flat plier
- Stripping plier
- Cutter
- Heat shrink
- Lasercutter
- 3D Printer
| Description | Qty |
|---|---|
| Magnet thickness: 2mm - diameter: 8mm | 8 |
| Metal bar diameter: 6mm - length: 32mm | 4 |
| Wood thickness: 4mm | 70x40cm |
| Plexiglas thickness: 2mm | |
| Acrylic paint |
| Description | Qty |
|---|---|
| LEDS Strip 144LEDS 60/meter | 1 |
| Arduino Nano | 1 |
| Capacitor 1mF | 1 |
| Power Supply 5v 4A | 1 |
| Female power connector | 1 |
| Cable section 1mm2 | 50cm |
| Resettable fuse 30V 3A | 1 |
| PCB | 1 |
| Real time clock DS3231 | 1 |
| Rotary encoder with push button | 1 |
| Resistor 510 ohm 2W | 1 |
| PCB Connector 2 poles (optionnal) | 2 |
| PCB Connector 3 poles (optionnal) | 1 |
| Description | Qty |
|---|---|
| Photo resistor | 1 |
| Resistor 10k 1/4W | 1 |
| Description | Qty |
|---|---|
| Resistor 4k7 | 2 |
| Description | Qty |
|---|---|
| ESP8266-01 | 1 |
| Voltage regulator 3.3 Volts | 1 |
| MOS FET BS170 | 1 |
| Resistor 10k ohms - 1/2W | 1 |
| Resistor 4k7 ohms - 1/4W | 1 |
| Pin header 3x2 | 1 |
| Jumpers | 2 |
| Capacitor 10uF | 1 |
| Capacitor 47uF | 1 |