Replies: 5 comments 13 replies
-
|
I got it to work on my Cloud Gateway Ultra. Got it today. Make sure to disable IGMP proxy in the web interface. After running the script to install, change the network interface from eth8 to eth4 in /etc/udm-iptv.conf . Needed to reboot but i works great. |
Beta Was this translation helpful? Give feedback.
-
|
Great. Surprised to hear IGMP proxy needs to be disabled. Wasn't this required for it to function, or is it because the package includes its own proxy? |
Beta Was this translation helpful? Give feedback.
-
|
The next day I had to rerun the install script and change the config file. The ud-iptv command was unknown. Not sure why or what diabled it overnight. Will have to check back tomorrow |
Beta Was this translation helpful? Give feedback.
-
|
Yes that caused the issue. In the docs I read that with firmware upgrades you probably have to run the install script again. I wish Unifi had support in the GUI for setting this up. |
Beta Was this translation helpful? Give feedback.
-
|
I can't seem to get it to work reliably. With your settings and GUI config from https://gathering.tweakers.net/forum/view_message/78236326 it works 'a little bit'. I only see about 1 or 2 seconds of stream, then it freezes with error stb-nmc-400. When I change channel it works again for a couple of seconds then freezes again. On USG I also had this issue sometimes, which could be solved by issuing a 'restart igmp-proxy' command, but that's not available on UnifiOS. What could be the problem? |
Beta Was this translation helpful? Give feedback.
-
|
Never mind, found it. Apparently the IPTV port (eth4) had to get VLAN661 traffic untagged. After changing the native vlan on the port to IPTV(661), it started working 👍 |
Beta Was this translation helpful? Give feedback.
-
|
Can’t you enable SSH using an API request, amd disable it when the pipeline is finished? |
Beta Was this translation helpful? Give feedback.
-
|
I ran the scipt on the Cloud gateway ultra, but don't seem to get it to work. I had it working on the UDM pro |
Beta Was this translation helpful? Give feedback.
-
|
Will get my Cloud gateway ultra next Friday and looking forward to set it up as described here. Just one question: will it be possible to connect the KPN IPTV box over wifi? |
Beta Was this translation helpful? Give feedback.
-
|
Most likely won't work as it doesn't work over ethernet. The script only runs on UDM. I've reverted back to Fritzbox modem and plugged in tv directly to there and the Cloud Gateway Ultra also. It's the only way I got tv to work and I've been trying different things for weeks. |
Beta Was this translation helpful? Give feedback.
-
|
At the moment I run Unifi Amplifi as wifi solution behind my Experiabox V10, and have the KPN IPTV box (TV+) connected to the wifi. Will update here if I get it to work else I have to invest again in a couple of powerline adapters |
Beta Was this translation helpful? Give feedback.
-
|
First test: have set up the CGU behind my Experiabox, created a test SSID and connected the IPTV box to the new SSID. |
Beta Was this translation helpful? Give feedback.
-
|
Kpn sends the tv over tagged vlan4. Now your experiabox forwards it (automatically kpn does that for you) but if you remove that you'll have to configure that on your ucg. |
Beta Was this translation helpful? Give feedback.
-
|
Support has been added in udm-iptv v3.05 (28 Apr 2024) |
Beta Was this translation helpful? Give feedback.
-
|
Doesn't work, getting this error: |
Beta Was this translation helpful? Give feedback.
-
Unifi release a new product. Can we use this script on that device as well?
Beta Was this translation helpful? Give feedback.
All reactions