Replies: 5 comments 2 replies
-
did you get any updates on this? |
Beta Was this translation helpful? Give feedback.
-
Hi There, Switched from Telekom-DSL to Telekom-FTTH today Diagnostic Information ===ifconfig== eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 eth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 eth2: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 eth3: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 eth4: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 eth5: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 eth6: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 eth7: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 eth8: flags=4099<UP,BROADCAST,MULTICAST> mtu 9216 eth9: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 eth10: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500 eth9.7: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536 ppp0: flags=4305<UP,POINTOPOINT,RUNNING,NOARP,MULTICAST> mtu 1492 switch0: flags=4419<UP,BROADCAST,RUNNING,PROMISC,MULTICAST> mtu 9216 switch0.1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 9216 Describe the Bug udm-iptv.conf IPTV_WAN_INTERFACE="ppp0" My mother-in-law can't watch TV, I suffer ;) |
Beta Was this translation helpful? Give feedback.
-
I think you have to disable IGMP Proxy in the UniFi Network Application if you install and use udm-iptv. |
Beta Was this translation helpful? Give feedback.
-
Hi, oh man I'm also getting fiber optics from Telekom next week. I am currently using the IGMP proxy in the UniFi Network Application. This is now working perfectly. I hope I won't have any problems after the switch. Has anyone already successfully made this switch? A lot of connections are currently being converted to fiber optics. @DrLapacho Have you been able to solve the problem in the meantime? Regards |
Beta Was this translation helpful? Give feedback.
-
Hmmm, I have the MR401.... and keep my fingers crossed... |
Beta Was this translation helpful? Give feedback.
-
Hello,
the proxy runs perfectly without any problems.
The only problem I have is that when the provider (Deutsche Telekom) assigns me a new IP, the image is frozen and the following error message appears in the dignose log:
root@Firewall:~# udm-iptv-diag
Please share the following output with the developers:
=== Configuration ===
WAN Interface: ppp0
WAN VLAN: 0 (dev iptv)
WAN DHCP: false (options "-O staticroutes -V IPTV_RG")
WAN Ranges: 224.0.0.0/4 87.141.0.0/16 193.158.0.0/15
LAN Interfaces: br60
IGMP Proxy quickleave disabled: false
IGMP Proxy debug: false
=== IP Link and Route ===
51: ppp0: <POINTOPOINT,MULTICAST,NOARP,UP,LOWER_UP> mtu 1492 qdisc pfifo_fast state UNKNOWN group default qlen 3
inet 84.132.XX.XX peer 62.155.243.150/32 scope global ppp0
valid_lft forever preferred_lft forever
62.155.243.150 proto kernel scope link src 84.132.XX.XX
=== Service Logs ===
Apr 07 20:04:32 Firewall igmpproxy[967622]: select() failure; Errno(4): Interrupted system call
Apr 07 20:04:32 Firewall igmpproxy[967622]: can't leave group 232.0.10.149 on interface ppp0; Errno(99): Cannot assign requested address
Apr 07 20:04:32 Firewall systemd[1]: udm-iptv.service: Succeeded.
Apr 07 20:04:32 Firewall systemd[1]: Stopped IPTV support for the UniFi Dream Machine.
Apr 07 20:04:32 Firewall systemd[1]: udm-iptv.service: Consumed 15.684s CPU time.
Apr 07 20:04:32 Firewall systemd[1]: Started IPTV support for the UniFi Dream Machine.
Apr 07 20:04:32 Firewall udm-iptv[3569625]: NATing IPTV network ranges (if necessary)
Apr 07 20:04:32 Firewall udm-iptv[3569625]: Monitoring interface ppp0 for changes
Apr 07 20:04:32 Firewall udm-iptv[3569625]: Setting up igmpproxy
Apr 07 20:04:32 Firewall udm-iptv[3569625]: Starting igmpproxy
If I then restart the service, everything runs smoothly again until a new IP change is carried out.
root@Firewall:
# systemctl restart udm-iptv# udm-iptv-diagroot@Firewall:
Please share the following output with the developers:
=== Configuration ===
WAN Interface: ppp0
WAN VLAN: 0 (dev iptv)
WAN DHCP: false (options "-O staticroutes -V IPTV_RG")
WAN Ranges: 224.0.0.0/4 87.141.0.0/16 193.158.0.0/15
LAN Interfaces: br60
IGMP Proxy quickleave disabled: false
IGMP Proxy debug: false
=== IP Link and Route ===
51: ppp0: <POINTOPOINT,MULTICAST,NOARP,UP,LOWER_UP> mtu 1492 qdisc pfifo_fast state UNKNOWN group default qlen 3
inet 84.132.XX.XX peer 62.155.243.150/32 scope global ppp0
valid_lft forever preferred_lft forever
62.155.243.150 proto kernel scope link src 84.132.XX.XX
=== Service Logs ===
Apr 17 17:04:00 Firewall systemd[1]: Stopping IPTV support for the UniFi Dream Machine...
Apr 17 17:04:00 Firewall igmpproxy[3569625]: select() failure; Errno(4): Interrupted system call
Apr 17 17:04:00 Firewall systemd[1]: udm-iptv.service: Succeeded.
Apr 17 17:04:00 Firewall systemd[1]: Stopped IPTV support for the UniFi Dream Machine.
Apr 17 17:04:00 Firewall udm-iptv[925247]: NATing IPTV network ranges (if necessary)
Apr 17 17:04:00 Firewall systemd[1]: udm-iptv.service: Consumed 22.842s CPU time.
Apr 17 17:04:00 Firewall systemd[1]: Started IPTV support for the UniFi Dream Machine.
Apr 17 17:04:00 Firewall udm-iptv[925247]: Monitoring interface ppp0 for changes
Apr 17 17:04:00 Firewall udm-iptv[925247]: Setting up igmpproxy
Apr 17 17:04:00 Firewall udm-iptv[925247]: Starting igmpproxy
Have I configured something incorrectly?
Best regards
Sven
Beta Was this translation helpful? Give feedback.
All reactions