ErgoWing is a custom design mechanical keyboard heavily inspired by the ErgoDox and Atreus mechanical keyboards.
In this repo are the CAD files required to laser cut a case for this keyboard. Layer 1 is not required. The thickness' I used for my case were:
- Layer 1: 2mm
- Layer 2: 4mm
- Layer 3: 5mm
- Layer 4: 5mm
- Layer 5: 2mm
This gives 10mm of space inside of the case for the bottom of the switches, teensy 2.0 and wiring.
There is no kerf accounted for in the CAD files - adjustments will need to be made based on the kerf requirements of your cutting method/material used.
Please double check all dimensions if you plan to use these files.
I forked qmk_firmware and modified the gh60 files to create the firmware for this keyboard. It can be found here. The relevant files are in keyboards/handwired/ergowing.