Skip to content

Latest commit

 

History

History
264 lines (204 loc) · 17.5 KB

README.md

File metadata and controls

264 lines (204 loc) · 17.5 KB
Raw

Build Status Release Wiki Chat

English | 中文

Contents

Configuration

TM1701 & TM1707

Specifications Detail
Computer model Xiaomi NoteBook Pro 15.6'' (MX150/GTX)
Processor Intel Core i5-8250U / i7-8550U Processor
Memory 8GB/16GB Samsung DDR4 2400MHz
Hard Disk Samsung NVMe SSD Controller PM961 / PM981
Integrated Graphics Intel UHD Graphics 620
Monitor BOE NV156FHM-N61 FHD 1920x1080 (15.6 inch)
Sound Card Realtek ALC298 (layout-id: 30/99)
Wireless Card Intel Wireless-AC 8265
Trackpad ETD2303
SD Card Reader Realtek RTS5129 / RTS5250S

TM1905 & TM1963

Specifications Detail
Computer model Xiaomi NoteBook Pro 15.6'' (MX250/MX350)
Processor Intel Core i5-10210U / i7-10510U Processor
Memory 8GB/16GB Samsung DDR4 2666MHz
Hard Disk Intel SSD 660P Series
Integrated Graphics Intel UHD Graphics 620
Monitor LQ156M1JW01 SHP14C3 1920x1080 344x194mm 15.5-inch
Sound Card Realtek ALC256 (layout-id: 69/99)
Wireless Card Intel Wireless-AC 9462
Trackpad ELAN2303
SD Card Reader Realtek RTS5129

Current Status

  • HDMI may not work when you first-time plug it in
    • You have to re-plug it, or close the lid for about five seconds and reopen the lid
  • Ethernet may not work on macOS10.15+, view #256
  • On macOS10.15+, you need to update Wireless-USB-Adapter Driver
    • If you are not using macOS10.15+, it's still recommended to update the driver above
  • Discrete graphic card is not working, since macOS doesn't support Optimus technology
    • Have used SSDT-DDGPU to disable it in order to save power
  • Fingerprint sensor is not working
    • Have used SSDT-USB to disable it in order to save power
  • Intel Bluetooth does not support some Bluetooth devices
  • Intel Wi-Fi works with low performance
    • macOS Big Sur or higher is recommended; macOS version < 11 needs to rebuild kextcache and restart if Intel Wi-Fi does not work
    • Buy a USB Wi-Fi dongle or supported wireless card
    • Read Frequently Asked Questions for more information
  • Realtek USB SD Card Reader works with some setups
  • Everything else works well

Clover

  • TM1701 & TM1707: Supports macOS10.13 ~ macOS12
    • v1.5.9 is the last EFI version that supports macOS High Sierra & Mojave
  • TM1905 & TM1963: Supports macOS10.15 ~ macOS12
  • Have to choose ~ via Preboot to boot Big Sur
  • Should Clean NVRAM after using OpenCore
    • Press Space in OpenCore boot page, and then select Reset NVRAM entry
    • Then reboot and use Clover
  • r5127 do not support Intel Wi-Fi on macOS version < Big Sur due to incomplete ForceKextsToLoad functionality (Only v1.4.7 supports Intel Wi-Fi on old macOS versions, or you can add IO80211Family.kext to the kext folder)

OpenCore

  • TM1701 & TM1707: Supports macOS10.13 ~ macOS12
    • v1.5.9 is the last EFI version that supports macOS High Sierra & Mojave
  • TM1905 & TM1963: Supports macOS10.15 ~ macOS12
  • Software in Windows may lose activation due to different hardware UUID generated by OpenCore
    • According to OpenCore Official Configuration, you can try to inject the original firmware UUID to PlatformInfo - Generic - SystemUUID in /OC/config.plist
  • Should Clean NVRAM after using Clover
    • Press Space in OpenCore boot page, and then select Reset NVRAM entry
  • Limited theme
  • Recommend Reading: Security and FileVault | OpenCore Post-Install and OpenCore Configuration, especially the UEFI Secure Boot section

Installation

Identify Your Model

If you are using XiaoMi-Pro with 8th Gen CPU, then it's a KBL (Kaby Lake) machine. (Actually Kaby Lake Refresh)
If you are using XiaoMi-Pro with 10th Gen CPU, then it's a CML (Comet Lake) machine.
You will need this information when you download the EFI release.

First-time installation

donot_clone_or_download

get_release

Build

Build the latest beta EFI by running the following command in Terminal:

sh -c "$(curl -fsSL https://raw.githubusercontent.com/daliansky/XiaoMi-Pro-Hackintosh/main/makefile.sh)"

Or run the following command in Terminal:

git clone --depth=1 https://github.com/daliansky/XiaoMi-Pro-Hackintosh.git
cd XiaoMi-Pro-Hackintosh
./makefile.sh

Some advanced usages are:

# Build EFI with kexts and OpenCore in Debug version
./makefile.sh --debug_KextOC
# Ignore errors when the script is running
./makefile.sh --ignore_err
# Bundled with Chinese verison Docs
./makefile.sh --lang=zh_CN
# Generate EFI release for Comet Lake model
./makefile.sh --model=CML
# Preserve work files during the building stage
./makefile.sh --no_clean_up
# Use GitHub API
./makefile.sh --gh_api
# Build the latest beta EFI with pre-release kexts
./makefile.sh --pre_release=Kext
# Build the latest beta EFI with pre-release OpenCore
./makefile.sh --pre_release=OC

Upgrade

  • If you are using XiaoMi-Pro with 8th Gen CPU, then it's a KBL (Kaby Lake) machine. (Actually Kaby Lake Refresh)
  • If you are using XiaoMi-Pro with 10th Gen CPU, then it's a CML (Comet Lake) machine.
  • Download the latest EFI release from the release page or beta EFI release from artifacts in the action page.
  • A complete replacement of BOOT and CLOVER(or OC) folders is required. Delete these two folders and copy them from the release pack.

Improvements

  • Use Hackintool to inject EDID (AAPL00,override-no-connect)
  • Change #enable-backlight-smoother to enable-backlight-smoother in config.plist to adjust the panel brightness smoothly
  • Use xzhih's one-key-hidpi to improve quality of system UI
    • Support 1424x802 HiDPI resolution
    • TM1701: On macOS > 10.13.6, to enable higher HiDPI resolution (<=1520x855), you need to use DVMT_and_0xE2_fix to set DVMT to 64mb
  • Add forceRenderStandby=0 in config - NVRAM - Add - 7CXXX - boot-args (OpenCore) or config - Boot - Arguments (Clover) if NVMe Kernel Panic CSTS=0xffffffff occurs
  • Use NVMeFix to enable APST on NVMe SSDs
  • TM1701 & TM1707: Use ALCPlugFix to fix unworking jack after replug
  • TM1701: Use DVMT_and_0xE2_fix to set DVMT to 64mb and unlock CFG

FAQ

I can't click to drag or right click using the trackpad.

Starts from VoodooI2C v2.4.1, the click down action is emulated to force touch, which causes the failure of click down and drag and right click gestures. You can turn off Force Click in SysPref - Trackpad, and I recommend enabling three finger drag in SysPref - Accessibility - Mouse & Trackpad - Trackpad Options.

My screen turns to black and has no response during the updating process.

If you have black screen for five minutes and get no response from the device, please force restart your laptop(Long press power button) and choose Boot macOS Install from ~ entry.

Stuck on Apple logo or fail to boot.

A reset of NVRAM is recommended. For Clover users, press Fn+F11 when you are in Clover boot page.
For OC users, press Space key when you are in OpenCore boot page and choose Reset NVRAM. If this does not work, you can try to set SecureBootModel to Disabled in config.plist.
For Clover users, try to delete HWTarget in config.plist.

My device is locked by Find My Mac and can't be booted, what should I do now?

For Clover users, press Fn+F11 when you are in Clover boot page. Then Clover will refresh nvram.plist, and lock message should be removed.
For OC users, press Esc to enter the boot menu during startup. Then, press Space key and choose Reset NVRAM.

[Clover] I opened the FileVault, and I can't find macOS partition in Clover boot page, how can I solve it?

It is not recommended to open FileVault. You can press Fn+F3 in the Clover boot page and choose the icon with FileVault. Then you can boot in the system and close FileVault.

[OC] How to skip the boot menu and automatically boot into the system?

First, in macOS, open SysPref - Startup Disk. Choose the target system.
Then, open /EFI/OC/config.plist, and turn off ShowPicker.
When you want to switch OS, press Esc during startup to call the boot menu.

[OC] How to enable startup chime? (TM1701 & TM1707)

Change #AudioDxe.efi to AudioDxe.efi in config.plist - UEFI - Drivers.
Enable AudioSupport in config.plist - UEFI - Audio.
If you are using macOS Big Sur, go to SysPref - Sound and turn on Play sound on startup.
For macOS version < Big Sur, open Terminal.app and run sudo nvram StartupMute=%00.

Please refer to detailed FAQ in wiki FAQ.

Changelog

You can view Changelog for detailed information.

Credits

For more detail, please go to Reference page.

Support and discussion

Mi Notebooks supported by other projects:

tonymacx86.com:

QQ: