We read every piece of feedback, and take your input very seriously.
To see all available qualifiers, see our documentation.
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
Project link: https://github.com/ShashankVM/hamming_encoder_decoder_bmc
K-induction run command: ebmc -D FORMAL --k-induction --top dut dut.sv cc_encoder.sv piso.sv lfsr_encoder.sv cc_decoder_ht.sv lfsr_decoder.sv buffer_reg.sv error_correction_and_detection.sv channel.sv --reset reset==1
ebmc -D FORMAL --k-induction --top dut dut.sv cc_encoder.sv piso.sv lfsr_encoder.sv cc_decoder_ht.sv lfsr_decoder.sv buffer_reg.sv error_correction_and_detection.sv channel.sv --reset reset==1
Here is the output for k-induction:
[dut.ASSUME_STABLE_MESSAGE] always (disable iff (dut.reset) $fell(dut.encoder_ready) or !dut.encoder_ready |-> $stable(dut.message)): FAILURE: property unsupported by k-induction [dut.ASSUME_STABLE_ERROR_INJECT] always (disable iff (dut.reset) $fell(dut.encoder_ready) or !dut.encoder_ready |-> $stable(dut.error_inject)): FAILURE: property unsupported by k-induction [dut.ASSUME_STABLE_ERROR_POSITION1] always (disable iff (dut.reset) $fell(dut.encoder_ready) or !dut.encoder_ready |-> $stable(dut.error_pos1)): FAILURE: property unsupported by k-induction [dut.ASSUME_STABLE_ERROR_POSITION2] always (disable iff (dut.reset) $fell(dut.encoder_ready) or !dut.encoder_ready |-> $stable(dut.error_pos2)): FAILURE: property unsupported by k-induction [dut.ASSUME_VALID_ERROR_POSITION1] always (disable iff (dut.reset) dut.error_pos1 < 3'b111): ASSUMED [dut.ASSUME_VALID_ERROR_POSITION2] always (disable iff (dut.reset) dut.error_pos2 < 3'b111): ASSUMED [dut.ASSERT_RX_EQUAL_TX_NO_INJECTION] always (disable iff (dut.reset) dut.rx_valid && !dut.error_inject_reg |-> dut.tx_final == dut.rx): INCONCLUSIVE [dut.ASSERT_RX_EQUAL_TX_SINGLE_ERROR_WITH_INJECTION] always (disable iff (dut.reset) dut.rx_valid && $past(dut.error_pos1) == $past(dut.error_pos2) && dut.error_inject_reg |-> dut.tx_final == dut.rx): INCONCLUSIVE [dut.ASSERT_RX_NOT_EQUAL_TX_FOR_DOUBLE_ERROR] always (disable iff (dut.reset) dut.rx_valid && $past(dut.error_pos1) != $past(dut.error_pos2) && dut.error_inject_reg |-> dut.tx_final != dut.rx): INCONCLUSIVE [dut.ASSERT_ENCODER_LATENCY] always (disable iff (dut.reset) $rose(dut.encoder_ready) |-> (##7 dut.encoder_ready)): FAILURE: property unsupported by k-induction [dut.ASSERT_DECODER_LATENCY] always (disable iff (dut.reset) $rose(dut.rx_valid) |-> (##7 dut.rx_valid)): FAILURE: property unsupported by k-induction [dut.ASSERT_ERROR_DET_IF_ERROR_INJECT] always (disable iff (dut.reset) dut.rx_valid && dut.error_inject_reg |-> dut.error_det): INCONCLUSIVE [dut.ASSERT_ERROR_DET_IMPLIES_ERROR_INJECT] always (disable iff (dut.reset) dut.error_det |-> dut.error_inject_reg): INCONCLUSIVE [dut.ASSERT_RX_EVENTUALLY] always (disable iff (dut.reset) s_eventually dut.rx_valid): FAILURE: property unsupported by k-induction
Note: I later added an ifdef so covers are not included by default.
The text was updated successfully, but these errors were encountered:
No branches or pull requests
Project link: https://github.com/ShashankVM/hamming_encoder_decoder_bmc
K-induction run command:
ebmc -D FORMAL --k-induction --top dut dut.sv cc_encoder.sv piso.sv lfsr_encoder.sv cc_decoder_ht.sv lfsr_decoder.sv buffer_reg.sv error_correction_and_detection.sv channel.sv --reset reset==1
Here is the output for k-induction:
Note: I later added an ifdef so covers are not included by default.
The text was updated successfully, but these errors were encountered: