diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index 42b51c9812a0e..2b683d41c528e 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -553,6 +553,16 @@ config SATA_VITESSE If unsure, say N. +config SATA_ZHAOXIN + tristate "Zhaoxin SATA support" + depends on PCI + default y + select SATA_HOST + help + This option enables support for Zhaoxin Serial ATA. + + If unsure, say N. + comment "PATA SFF controllers with BMDMA" config PATA_ALI diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile index 20e6645ab7371..4b846692e3656 100644 --- a/drivers/ata/Makefile +++ b/drivers/ata/Makefile @@ -45,6 +45,7 @@ obj-$(CONFIG_SATA_SIL) += sata_sil.o obj-$(CONFIG_SATA_SIS) += sata_sis.o obj-$(CONFIG_SATA_SVW) += sata_svw.o obj-$(CONFIG_SATA_ULI) += sata_uli.o +obj-$(CONFIG_SATA_ZHAOXIN) += sata_zhaoxin.o obj-$(CONFIG_SATA_VIA) += sata_via.o obj-$(CONFIG_SATA_VITESSE) += sata_vsc.o diff --git a/drivers/ata/sata_zhaoxin.c b/drivers/ata/sata_zhaoxin.c new file mode 100644 index 0000000000000..9d7056ac9446a --- /dev/null +++ b/drivers/ata/sata_zhaoxin.c @@ -0,0 +1,371 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * sata_zhaoxin.c - ZhaoXin Serial ATA controllers + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "sata_zx" +#define DRV_VERSION "2.6.1" + +enum board_ids_enum { + zx100s, +}; + +enum { + SATA_CHAN_ENAB = 0x40, /* SATA channel enable */ + SATA_INT_GATE = 0x41, /* SATA interrupt gating */ + SATA_NATIVE_MODE = 0x42, /* Native mode enable */ + PATA_UDMA_TIMING = 0xB3, /* PATA timing for DMA/ cable detect */ + PATA_PIO_TIMING = 0xAB, /* PATA timing register */ + + PORT0 = (1 << 1), + PORT1 = (1 << 0), + ALL_PORTS = PORT0 | PORT1, + + NATIVE_MODE_ALL = (1 << 7) | (1 << 6) | (1 << 5) | (1 << 4), + + SATA_EXT_PHY = (1 << 6), /* 0==use PATA, 1==ext phy */ +}; + +static int zx_init_one(struct pci_dev *pdev, const struct pci_device_id *ent); +static int zx_scr_read(struct ata_link *link, unsigned int scr, u32 *val); +static int zx_scr_write(struct ata_link *link, unsigned int scr, u32 val); +static int zx_hardreset(struct ata_link *link, unsigned int *class, unsigned long deadline); + +static void zx_tf_load(struct ata_port *ap, const struct ata_taskfile *tf); + +static const struct pci_device_id zx_pci_tbl[] = { + { PCI_VDEVICE(ZHAOXIN, 0x9002), zx100s }, + { PCI_VDEVICE(ZHAOXIN, 0x9003), zx100s }, + { } /* terminate list */ +}; + +static struct pci_driver zx_pci_driver = { + .name = DRV_NAME, + .id_table = zx_pci_tbl, + .probe = zx_init_one, +#ifdef CONFIG_PM_SLEEP + .suspend = ata_pci_device_suspend, + .resume = ata_pci_device_resume, +#endif + .remove = ata_pci_remove_one, +}; + +static struct scsi_host_template zx_sht = { + ATA_BMDMA_SHT(DRV_NAME), +}; + +static struct ata_port_operations zx_base_ops = { + .inherits = &ata_bmdma_port_ops, + .sff_tf_load = zx_tf_load, +}; + +static struct ata_port_operations zx_ops = { + .inherits = &zx_base_ops, + .hardreset = zx_hardreset, + .scr_read = zx_scr_read, + .scr_write = zx_scr_write, +}; + +static struct ata_port_info zx100s_port_info = { + .flags = ATA_FLAG_SATA | ATA_FLAG_SLAVE_POSS, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA6, + .port_ops = &zx_ops, +}; + +static int zx_hardreset(struct ata_link *link, unsigned int *class, unsigned long deadline) +{ + int rc; + + rc = sata_std_hardreset(link, class, deadline); + if (!rc || rc == -EAGAIN) { + struct ata_port *ap = link->ap; + int pmp = link->pmp; + int tmprc; + + if (pmp) { + ap->ops->sff_dev_select(ap, pmp); + tmprc = ata_sff_wait_ready(&ap->link, deadline); + } else { + tmprc = ata_sff_wait_ready(link, deadline); + } + if (tmprc) + ata_link_err(link, "COMRESET failed for wait (errno=%d)\n", rc); + else + ata_link_err(link, "wait for bsy success\n"); + + ata_link_err(link, "COMRESET success (errno=%d) ap=%d link %d\n", rc, + link->ap->port_no, link->pmp); + } else { + ata_link_err(link, "COMRESET failed (errno=%d) ap=%d link %d\n", rc, + link->ap->port_no, link->pmp); + } + return rc; +} + +static int zx_scr_read(struct ata_link *link, unsigned int scr, u32 *val) +{ + static const u8 ipm_tbl[] = { 1, 2, 6, 0 }; + struct pci_dev *pdev = to_pci_dev(link->ap->host->dev); + int slot = 2 * link->ap->port_no + link->pmp; + u32 v = 0; + u8 raw; + + switch (scr) { + case SCR_STATUS: + pci_read_config_byte(pdev, 0xA0 + slot, &raw); + + /* read the DET field, bit0 and 1 of the config byte */ + v |= raw & 0x03; + + /* read the SPD field, bit4 of the configure byte */ + v |= raw & 0x30; + + /* read the IPM field, bit2 and 3 of the config byte */ + v |= ((ipm_tbl[(raw >> 2) & 0x3])<<8); + break; + + case SCR_ERROR: + /* devices other than 5287 uses 0xA8 as base */ + WARN_ON(pdev->device != 0x9002 && pdev->device != 0x9003); + pci_write_config_byte(pdev, 0x42, slot); + pci_read_config_dword(pdev, 0xA8, &v); + break; + + case SCR_CONTROL: + pci_read_config_byte(pdev, 0xA4 + slot, &raw); + + /* read the DET field, bit0 and bit1 */ + v |= ((raw & 0x02) << 1) | (raw & 0x01); + + /* read the IPM field, bit2 and bit3 */ + v |= ((raw >> 2) & 0x03) << 8; + + break; + + default: + return -EINVAL; + } + + *val = v; + + return 0; +} + +static int zx_scr_write(struct ata_link *link, unsigned int scr, u32 val) +{ + struct pci_dev *pdev = to_pci_dev(link->ap->host->dev); + int slot = 2 * link->ap->port_no + link->pmp; + u32 v = 0; + + WARN_ON(pdev == NULL); + + switch (scr) { + case SCR_ERROR: + /* devices 0x9002 uses 0xA8 as base */ + WARN_ON(pdev->device != 0x9002 && pdev->device != 0x9003); + pci_write_config_byte(pdev, 0x42, slot); + pci_write_config_dword(pdev, 0xA8, val); + return 0; + + case SCR_CONTROL: + /* set the DET field */ + v |= ((val & 0x4) >> 1) | (val & 0x1); + + /* set the IPM field */ + v |= ((val >> 8) & 0x3) << 2; + + pci_write_config_byte(pdev, 0xA4 + slot, v); + + return 0; + + default: + return -EINVAL; + } +} + +/* + * zx_tf_load - send taskfile registers to host controller + * @ap: Port to which output is sent + * @tf: ATA taskfile register set + * + * Outputs ATA taskfile to standard ATA host controller. + * + * This is to fix the internal bug of zx chipsets, which will + * reset the device register after changing the IEN bit on ctl + * register. + */ +static void zx_tf_load(struct ata_port *ap, const struct ata_taskfile *tf) +{ + struct ata_taskfile ttf; + + if (tf->ctl != ap->last_ctl) { + ttf = *tf; + ttf.flags |= ATA_TFLAG_DEVICE; + tf = &ttf; + } + ata_sff_tf_load(ap, tf); +} + +static const unsigned int zx_bar_sizes[] = { + 8, 4, 8, 4, 16, 256 +}; + +static const unsigned int zx100s_bar_sizes0[] = { + 8, 4, 8, 4, 16, 0 +}; + +static const unsigned int zx100s_bar_sizes1[] = { + 8, 4, 0, 0, 16, 0 +}; + +static int zx_prepare_host(struct pci_dev *pdev, struct ata_host **r_host) +{ + const struct ata_port_info *ppi0[] = { + &zx100s_port_info, NULL + }; + const struct ata_port_info *ppi1[] = { + &zx100s_port_info, &ata_dummy_port_info + }; + struct ata_host *host; + int i, rc; + + if (pdev->device == 0x9002) + rc = ata_pci_bmdma_prepare_host(pdev, ppi0, &host); + else if (pdev->device == 0x9003) + rc = ata_pci_bmdma_prepare_host(pdev, ppi1, &host); + else + rc = -EINVAL; + + if (rc) + return rc; + + *r_host = host; + + /* 9002 hosts four sata ports as M/S of the two channels */ + /* 9003 hosts two sata ports as M/S of the one channel */ + for (i = 0; i < host->n_ports; i++) + ata_slave_link_init(host->ports[i]); + + return 0; +} + +static void zx_configure(struct pci_dev *pdev, int board_id) +{ + u8 tmp8; + + pci_read_config_byte(pdev, PCI_INTERRUPT_LINE, &tmp8); + dev_info(&pdev->dev, "routed to hard irq line %d\n", + (int) (tmp8 & 0xf0) == 0xf0 ? 0 : tmp8 & 0x0f); + + /* make sure SATA channels are enabled */ + pci_read_config_byte(pdev, SATA_CHAN_ENAB, &tmp8); + if ((tmp8 & ALL_PORTS) != ALL_PORTS) { + dev_dbg(&pdev->dev, "enabling SATA channels (0x%x)\n", (int)tmp8); + tmp8 |= ALL_PORTS; + pci_write_config_byte(pdev, SATA_CHAN_ENAB, tmp8); + } + + /* make sure interrupts for each channel sent to us */ + pci_read_config_byte(pdev, SATA_INT_GATE, &tmp8); + if ((tmp8 & ALL_PORTS) != ALL_PORTS) { + dev_dbg(&pdev->dev, "enabling SATA channel interrupts (0x%x)\n", (int) tmp8); + tmp8 |= ALL_PORTS; + pci_write_config_byte(pdev, SATA_INT_GATE, tmp8); + } + + /* make sure native mode is enabled */ + pci_read_config_byte(pdev, SATA_NATIVE_MODE, &tmp8); + if ((tmp8 & NATIVE_MODE_ALL) != NATIVE_MODE_ALL) { + dev_dbg(&pdev->dev, "enabling SATA channel native mode (0x%x)\n", (int) tmp8); + tmp8 |= NATIVE_MODE_ALL; + pci_write_config_byte(pdev, SATA_NATIVE_MODE, tmp8); + } +} + +static int zx_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) +{ + unsigned int i; + int rc; + struct ata_host *host = NULL; + int board_id = (int) ent->driver_data; + const unsigned int *bar_sizes; + int legacy_mode = 0; + + ata_print_version_once(&pdev->dev, DRV_VERSION); + + if (pdev->device == 0x9002 || pdev->device == 0x9003) { + if ((pdev->class >> 8) == PCI_CLASS_STORAGE_IDE) { + u8 tmp8, mask; + + /* TODO: What if one channel is in native mode ... */ + pci_read_config_byte(pdev, PCI_CLASS_PROG, &tmp8); + mask = (1 << 2) | (1 << 0); + if ((tmp8 & mask) != mask) + legacy_mode = 1; + } + if (legacy_mode) + return -EINVAL; + } + + rc = pcim_enable_device(pdev); + if (rc) + return rc; + + if (board_id == zx100s && pdev->device == 0x9002) + bar_sizes = &zx100s_bar_sizes0[0]; + else if (board_id == zx100s && pdev->device == 0x9003) + bar_sizes = &zx100s_bar_sizes1[0]; + else + bar_sizes = &zx_bar_sizes[0]; + + for (i = 0; i < ARRAY_SIZE(zx_bar_sizes); i++) { + if ((pci_resource_start(pdev, i) == 0) || + (pci_resource_len(pdev, i) < bar_sizes[i])) { + if (bar_sizes[i] == 0) + continue; + + dev_err(&pdev->dev, "invalid PCI BAR %u (sz 0x%llx, val 0x%llx)\n", i, + (unsigned long long)pci_resource_start(pdev, i), + (unsigned long long)pci_resource_len(pdev, i)); + + return -ENODEV; + } + } + + switch (board_id) { + case zx100s: + rc = zx_prepare_host(pdev, &host); + break; + default: + rc = -EINVAL; + } + if (rc) + return rc; + + zx_configure(pdev, board_id); + + pci_set_master(pdev); + + return ata_host_activate(host, pdev->irq, ata_bmdma_interrupt, IRQF_SHARED, &zx_sht); +} + +module_pci_driver(zx_pci_driver); + +MODULE_AUTHOR("Yanchen:YanchenSun@zhaoxin.com"); +MODULE_DESCRIPTION("SCSI low-level driver for ZX SATA controllers"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, zx_pci_tbl); +MODULE_VERSION(DRV_VERSION);