Skip to content

Latest commit

 

History

History
34 lines (23 loc) · 1.83 KB

README.md

File metadata and controls

34 lines (23 loc) · 1.83 KB
Raw

Play mp3 files with different sample rates

This example plays the same music at three different sample rates (8000 Hz, 22050 Hz and 44100 Hz) in a loop. The music is stored in three separate files provided in 'main' folder. The files get embedded in the application during compilation. After application upload, the files are played one after another to show differences in audio quality.

Compatibility

ESP32-LyraT ESP32-LyraT-MSC
alt text alt text
alt text alt text

Usage

Prepare the audio board:

  • Connect speakers or headphones to the board.

Configure the example:

  • Select compatible audio board in menuconfig > Audio HAL.

Load and run the example.

  • Music playback will start automatically and loop through the three files.

  • The sample rate may be checked during playback on a terminal:

    I (160) PLAY_MP3_RATES: [ * ] Receive music info from mp3 decoder, sample_rates=8000, bits=16, ch=2
I (12610) PLAY_MP3_RATES: [ * ] Receive music info from mp3 decoder, sample_rates=22050, bits=16, ch=2
I (25030) PLAY_MP3_RATES: [ * ] Receive music info from mp3 decoder, sample_rates=44100, bits=16, ch=2
I (37320) PLAY_MP3_RATES: [ * ] Receive music info from mp3 decoder, sample_rates=8000, bits=16, ch=2
I (49740) PLAY_MP3_RATES: [ * ] Receive music info from mp3 decoder, sample_rates=22050, bits=16, ch=2
...