diff --git a/docs/update_process.md b/docs/update_process.md
index 4ddd498a..0f07155c 100644
--- a/docs/update_process.md
+++ b/docs/update_process.md
@@ -8,48 +8,48 @@ Instructions to do a release with new NIST 800-53 mappings
 
 
 ### Steps:
-1. Set up a new folder (e.g., ATT&CK400.0). Its contents should look like this:
-```
-frameworks/
-├── ATT&CKv10.1/ <--- Existing folder (not expanded)
-└── ATT&CKvX.Y/ <-- New Folder Structure
-    ├── nist800-53-r4/
-    │   ├── input/
-    │   ├── layers/
-    │   └── stix/
-    └── nist800-53-r5/
-        ├── input/
-        ├── layers/
-        └── stix/
-```
-2. Populate the NIST 800-53 r4 folder:  
-  a. Copy the 800-53-r4 spreadsheet to `frameworks/ATT&CKvX.Y/nist800-53-r4/nist800-53-r4-mappings.xlsx`  
-  b. Copy a prior version readme file to `frameworks/ATT&CKvX.Y/nist800-53-r4/README.md` and perform the following edits:  
-      i. Line 3: Change the ATT&CK version to the correct one  
-      ii. Line 7: Change mappings version to 1.0  
-      iii. Line 7: Change last updated to today's date (e.g., 22 December 2021)  
-      iv. Line 7: Change the ATT&CK version to the correct one  
-  c. Copy a prior version parse.py file to `frameworks/ATT&CKvX.Y/nist800-53-r4/parse.py` and do not make any edits  
-  d. Copy a prior version parse_controls.py file to `frameworks/ATT&CKvX.Y/nist800-53-r4/parse_controls.py` and do not make any edits  
-  e. Copy a prior version parse_mappings.py file to `frameworks/ATT&CKvX.Y/nist800-53-r4/parse_mappings.py` and do not make any edits  
-  f. Copy a prior version nist800-53-r4-controls.tsv to `frameworks/ATT&CKvX.Y/nist800-53-r4/input/nist800-53-r4-controls.tsv` and do not make any edits  
-  g. Save a copy of `frameworks/ATT&CKvX.Y/nist800-53-r4/nist800-53-r4-mappings.xlsx` as a tab separated format in `frameworks/ATT&CKvX.Y/nist800-53-r4/input/nist800-53-r4-mappings.tsv`  
-      i. Depending on your setup, you may have to save the file as .txt and then rename to .tsv  
-  h. Copy a prior version `input/README.md` to `frameworks/ATT&CKvX.Y/nist800-53-r4/input/README.md` and do not make any edits  
-  i. Copy a prior version `input/config.json` to `frameworks/ATT&CKvX.Y/nist800-53-r4/input/config.json` and make the following changes:  
-      i. Line 4: Change the ATT&CK version to be correct  
-      ii. Line 5: Change the mappings_version to be `1.0`  
-3. Repeat the prior steps for NIST 800-53 r5  
-4. Set up and activate the project’s virtual environment  
-```
-virtualenv venv  
-source venv/bin/activate  
-pip install -r requirements/requirements.txt
-```  
-5. Edit src/make.py:  
-  a. Append “vX.Y” to the ATT&CK version list on line 18  
-6. Run python src/make.py  
-  a. Error Q&A:  
-      i. NOTE WELL: Any changes to the spreadsheet will require re-creating the .tsv file  
-      ii. ERROR: cannot find techniqueID T1547(.\011)  
-          Answer: A regex in the spreadsheet did not match an ATT&CK technique. In the above case, the regex was incorrect (should have been “\.011”) and the spreadsheet needed to be corrected  
+1. Set up a new folder (e.g., ATT&CK-v400.0). Its contents should look like this:
+   ```
+   frameworks/
+   ├── ATT&CK-v10.1/ <--- Existing folder (not expanded)
+   └── ATT&CK-vX.Y/  <--- New Folder Structure
+       ├── nist800-53-r4/
+       │   ├── input/
+       │   ├── layers/
+       │   └── stix/
+       └── nist800-53-r5/
+           ├── input/
+           ├── layers/
+           └── stix/
+   ```
+2. Populate the NIST 800-53 r4 folder:
+   1. Copy the 800-53-r4 spreadsheet to `frameworks/ATT&CK-vX.Y/nist800-53-r4/nist800-53-r4-mappings.xlsx`
+   2. Copy a prior version readme file to `frameworks/ATT&CK-vX.Y/nist800-53-r4/README.md` and perform the following edits:
+      1. Line 3: Change the ATT&CK version to the correct one
+      2. Line 7: Change mappings version to 1.0
+      3. Line 7: Change last updated to today's date (e.g., 22 December 2021)
+      4. Line 7: Change the ATT&CK version to the correct one
+   3. Copy a prior version parse.py file to `frameworks/ATT&CK-vX.Y/nist800-53-r4/parse.py` and do not make any edits
+   4. Copy a prior version parse_controls.py file to `frameworks/ATT&CK-vX.Y/nist800-53-r4/parse_controls.py` and do not make any edits
+   5. Copy a prior version parse_mappings.py file to `frameworks/ATT&CK-vX.Y/nist800-53-r4/parse_mappings.py` and do not make any edits
+   6. Copy a prior version nist800-53-r4-controls.tsv to `frameworks/ATT&CK-vX.Y/nist800-53-r4/input/nist800-53-r4-controls.tsv` and do not make any edits
+   7. Save a copy of `frameworks/ATT&CK-vX.Y/nist800-53-r4/nist800-53-r4-mappings.xlsx` as a tab separated format in `frameworks/ATT&CK-vX.Y/nist800-53-r4/input/nist800-53-r4-mappings.tsv`
+      1. Depending on your setup, you may have to save the file as .txt and then rename to .tsv
+   8. Copy a prior version `input/README.md` to `frameworks/ATT&CK-vX.Y/nist800-53-r4/input/README.md` and do not make any edits
+   9. Copy a prior version `input/config.json` to `frameworks/ATT&CK-vX.Y/nist800-53-r4/input/config.json` and make the following changes:
+      1. Line 4: Change the ATT&CK version to be correct
+      2. Line 5: Change the mappings_version to be `1.0`
+3. Repeat the prior steps for NIST 800-53 r5
+4. Set up and activate the project’s virtual environment
+   ```
+   virtualenv venv
+   source venv/bin/activate
+   pip install -r requirements/requirements.txt
+   ```
+5. Edit src/make.py:
+   1. Append "vX.Y" to the ATT&CK version list on line 18
+6. Run python src/make.py
+   1. Error Q&A:
+      1. NOTE WELL: Any changes to the spreadsheet will require re-creating the .tsv file
+      2. ERROR: cannot find techniqueID T1547(.\011)
+         - Answer: A regex in the spreadsheet did not match an ATT&CK technique. In the above case, the regex was incorrect (should have been "\.011") and the spreadsheet needed to be corrected