mixpre-dc-buddy

DIY MixPre DC power input with SD card access

Just the raw design files for now, more detailed explanation to come.

Enclosures

MixPre-6 (tested with original and II)

CAD design (for modification): OnShape CAD design

STL files: enclosure-6

MixPre-10 II (only tested with II)

CAD design (for modification): OnShape CAD design

STL files: enclosure-10

parts list

3d printed case from CAD above
PCB from fab files in this repo (I used Osh Park to get them made)
CC BEC 2.0 VOLTAGE REGULATOR
A short DC cable with the right connector for your battery
nuts and bolts
- MixPre-6
  - 3x M2.5x16mm hex socket head cap screws
  - 1x M2.5x25mm hex socket head cap screws
  - 5x M2.5 nuts
- MixPre-10 II
  - 3x M2.5x25mm hex socket head cap screws
  - 3x M2.5 nuts
- I got an assortment kit