Skip to content

Latest commit

 

History

History
192 lines (143 loc) · 8.14 KB

command_execution_port_forwarding.md

File metadata and controls

192 lines (143 loc) · 8.14 KB

WARNING WARNING WARNING WARNING WARNING

PLEASE NOTE: This document applies to the HEAD of the source tree

If you are using a released version of Kubernetes, you should refer to the docs that go with that version.

The latest release of this document can be found [here](http://releases.k8s.io/release-1.2/docs/design/command_execution_port_forwarding.md).

Documentation for other releases can be found at releases.k8s.io.

Container Command Execution & Port Forwarding in Kubernetes

Abstract

This document describes how to use Kubernetes to execute commands in containers, with stdin/stdout/stderr streams attached and how to implement port forwarding to the containers.

Background

See the following related issues/PRs:

Motivation

Users and administrators are accustomed to being able to access their systems via SSH to run remote commands, get shell access, and do port forwarding.

Supporting SSH to containers in Kubernetes is a difficult task. You must specify a "user" and a hostname to make an SSH connection, and sshd requires real users (resolvable by NSS and PAM). Because a container belongs to a pod, and the pod belongs to a namespace, you need to specify namespace/pod/container to uniquely identify the target container. Unfortunately, a namespace/pod/container is not a real user as far as SSH is concerned. Also, most Linux systems limit user names to 32 characters, which is unlikely to be large enough to contain namespace/pod/container. We could devise some scheme to map each namespace/pod/container to a 32-character user name, adding entries to /etc/passwd (or LDAP, etc.) and keeping those entries fully in sync all the time. Alternatively, we could write custom NSS and PAM modules that allow the host to resolve a namespace/pod/container to a user without needing to keep files or LDAP in sync.

As an alternative to SSH, we are using a multiplexed streaming protocol that runs on top of HTTP. There are no requirements about users being real users, nor is there any limitation on user name length, as the protocol is under our control. The only downside is that standard tooling that expects to use SSH won't be able to work with this mechanism, unless adapters can be written.

Constraints and Assumptions

  • SSH support is not currently in scope.
  • CGroup confinement is ultimately desired, but implementing that support is not currently in scope.
  • SELinux confinement is ultimately desired, but implementing that support is not currently in scope.

Use Cases

  • A user of a Kubernetes cluster wants to run arbitrary commands in a container with local stdin/stdout/stderr attached to the container.
  • A user of a Kubernetes cluster wants to connect to local ports on his computer and have them forwarded to ports in a container.

Process Flow

Remote Command Execution Flow

  1. The client connects to the Kubernetes Master to initiate a remote command execution request.
  2. The Master proxies the request to the Kubelet where the container lives.
  3. The Kubelet executes nsenter + the requested command and streams stdin/stdout/stderr back and forth between the client and the container.

Port Forwarding Flow

  1. The client connects to the Kubernetes Master to initiate a remote command execution request.
  2. The Master proxies the request to the Kubelet where the container lives.
  3. The client listens on each specified local port, awaiting local connections.
  4. The client connects to one of the local listening ports.
  5. The client notifies the Kubelet of the new connection.
  6. The Kubelet executes nsenter + socat and streams data back and forth between the client and the port in the container.

Design Considerations

Streaming Protocol

The current multiplexed streaming protocol used is SPDY. This is not the long-term desire, however. As soon as there is viable support for HTTP/2 in Go, we will switch to that.

Master as First Level Proxy

Clients should not be allowed to communicate directly with the Kubelet for security reasons. Therefore, the Master is currently the only suggested entry point to be used for remote command execution and port forwarding. This is not necessarily desirable, as it means that all remote command execution and port forwarding traffic must travel through the Master, potentially impacting other API requests.

In the future, it might make more sense to retrieve an authorization token from the Master, and then use that token to initiate a remote command execution or port forwarding request with a load balanced proxy service dedicated to this functionality. This would keep the streaming traffic out of the Master.

Kubelet as Backend Proxy

The kubelet is currently responsible for handling remote command execution and port forwarding requests. Just like with the Master described above, this means that all remote command execution and port forwarding streaming traffic must travel through the Kubelet, which could result in a degraded ability to service other requests.

In the future, it might make more sense to use a separate service on the node.

Alternatively, we could possibly inject a process into the container that only listens for a single request, expose that process's listening port on the node, and then issue a redirect to the client such that it would connect to the first level proxy, which would then proxy directly to the injected process's exposed port. This would minimize the amount of proxying that takes place.

Scalability

There are at least 2 different ways to execute a command in a container: docker exec and nsenter. While docker exec might seem like an easier and more obvious choice, it has some drawbacks.

docker exec

We could expose docker exec (i.e. have Docker listen on an exposed TCP port on the node), but this would require proxying from the edge and securing the Docker API. docker exec calls go through the Docker daemon, meaning that all stdin/stdout/stderr traffic is proxied through the Daemon, adding an extra hop. Additionally, you can't isolate 1 malicious docker exec call from normal usage, meaning an attacker could initiate a denial of service or other attack and take down the Docker daemon, or the node itself.

We expect remote command execution and port forwarding requests to be long running and/or high bandwidth operations, and routing all the streaming data through the Docker daemon feels like a bottleneck we can avoid.

nsenter

The implementation currently uses nsenter to run commands in containers, joining the appropriate container namespaces. nsenter runs directly on the node and is not proxied through any single daemon process.

Security

Authentication and authorization hasn't specifically been tested yet with this functionality. We need to make sure that users are not allowed to execute remote commands or do port forwarding to containers they aren't allowed to access.

Additional work is required to ensure that multiple command execution or port forwarding connections from different clients are not able to see each other's data. This can most likely be achieved via SELinux labeling and unique process contexts.

Analytics