Embark makes it easy to choose a command to run based on what is near
point, both during a minibuffer completion session (in a way familiar
to Helm or Counsel users) and in normal buffers. Bind the command
embark-act to a key and it acts like prefix-key for a keymap of
actions (commands) relevant to the target around point. With point on
an URL in a buffer you can open the URL in a browser or eww or
download the file it points to. If while switching buffers you spot an
old one, you can kill it right there and continue to select another.
Embark comes preconfigured with over a hundred actions for common
types of targets such as files, buffers, identifiers, s-expressions,
sentences; and it is easy to add more actions and more target types.
Embark can also collect all the candidates in a minibuffer to an
occur-like buffer or export them to a buffer in a major-mode specific
to the type of candidates, such as dired for a set of files, ibuffer
for a set of buffers, or customize for a set of variables.
You can think of embark-act as a keyboard-based version of a
right-click contextual menu. The embark-act command (which you should
bind to a convenient key), acts as a prefix for a keymap offering you
relevant actions to use on a target determined by the context:
- In the minibuffer, the target is the current top completion candidate.
- In the
*Completions*buffer the target is the completion at point. - In a regular buffer, the target is the region if active, or else the file, symbol, URL, s-expression or defun at point.
Multiple targets can be present at the same location and you can cycle
between them by repeating the embark-act key binding. The type of
actions offered depend on the type of the target. Here is a sample of
a few of the actions offered in the default configuration:
- For files you get offered actions like deleting, copying, renaming, visiting in another window, running a shell command on the file, etc.
- For buffers the actions include switching to or killing the buffer.
- For package names the actions include installing, removing or visiting the homepage.
- For Emacs Lisp symbols the actions include finding the definition, looking up documentation, evaluating (which for a variable immediately shows the value, but for a function lets you pass it some arguments first). There are some actions specific to variables, such as setting the value directly or though the customize system, and some actions specific to commands, such as binding it to a key.
By default when you use embark-act if you don’t immediately select an
action, after a short delay Embark will pop up a buffer showing a list
of actions and their corresponding key bindings. If you are using
embark-act outside the minibuffer, Embark will also highlight the
current target. These behaviors are configurable via the variable
embark-indicators. Instead of selecting an action via its key binding,
you can select it by name with completion by typing C-h after
embark-act.
Everything is easily configurable: determining the current target, classifying it, and deciding which actions are offered for each type in the classification. The above introduction just mentions part of the default configuration.
Configuring which actions are offered for a type is particularly easy
and requires no programming: the variable embark-keymap-alist
associates target types with variables containing keymaps, and those
keymaps containing bindings for the actions. (To examine the available
categories and their associated keymaps, you can use C-h v
embark-keymap-alist or customize that variable.) For example, in the
default configuration the type file is associated with the symbol
embark-file-map. That symbol names a keymap with single-letter key
bindings for common Emacs file commands, for instance c is bound to
copy-file. This means that if you are in the minibuffer after running
a command that prompts for a file, such as find-file or rename-file,
you can copy a file by running embark-act and then pressing c.
These action keymaps are very convenient but not strictly necessary
when using embark-act: you can use any command that reads from the
minibuffer as an action and the target of the action will be inserted
at the first minibuffer prompt. After running embark-act all of your
key bindings and even execute-extended-command can be used to run a
command. For example, if you want to replace all occurrences of the
symbol at point, just use M-% as the action, there is no need to bind
query-replace in one of Embark’s keymaps. Also, those action keymaps
are normal Emacs keymaps and you should feel free to bind in them
whatever commands you find useful as actions and want to be available
through convenient bindings.
The actions in embark-general-map are available no matter what type
of completion you are in the middle of. By default this includes
bindings to save the current candidate in the kill ring and to insert
the current candidate in the previously selected buffer (the buffer
that was current when you executed a command that opened up the
minibuffer).
Emacs’s minibuffer completion system includes metadata indicating the
category of what is being completed. For example, find-file’s
metadata indicates a category of file and switch-to-buffer’s metadata
indicates a category of buffer. Embark has the related notion of the
type of a target for actions, and by default when category metadata
is present it is taken to be the type of minibuffer completion
candidates when used as targets. Emacs commands often do not set
useful category metadata so the Marginalia package, which supplies
this missing metadata, is highly recommended for use with Embark.
Embark’s default configuration has actions for the following target types: files, buffers, symbols, packages, URLs, bookmarks, and as a somewhat special case, actions for when the region is active. You can read about the default actions and their key bindings on the GitHub project wiki.
Embark has a notion of default action for a target:
- If the target is a minibuffer completion candidate, then the default
action is whatever command opened the minibuffer in the first place.
For example if you run
kill-buffer, then the default action will be to kill buffers. - If the target comes from a regular buffer (i.e., not a minibuffer),
then the default action is whatever is bound to
RETin the keymap of actions for that type of target. For example, in Embark’s default configuration for a URL found at point the default action isbrowse-url, becauseRETis bound tobrowse-urlin theembark-url-mapkeymap.
To run the default action you can press RET after running embark-act.
Note that if there are several different targets at a given location,
each has its own default action, so first cycle to the target you want
and then press RET to run the corresponding default action.
There is also embark-dwim which runs the default action for the first
target found. It’s pretty handy in non-minibuffer buffers: with
Embark’s default configuration it will:
- Open the file at point.
- Open the URL at point in a web browser (using the
browse-urlcommand). - Compose a new email to the email address at point.
- In an Emacs Lisp buffer, if point is on an opening parenthesis or right after a closing one, it will evaluate the corresponding expression.
- Go to the definition of an Emacs Lisp function, variable or macro at point.
- Find the file corresponding to an Emacs Lisp library at point.
Besides acting individually on targets, Embark lets you work collectively on a set of target candidates. For example, while you are in the minibuffer the candidates are simply the possible completions of your input. Embark provides three main commands to work on candidate sets:
- The
embark-act-allcommand runs the same action on each of the current candidates. It is just like usingembark-acton each candidate in turn. (Because you can easily act on many more candidates than you meant to, by default Embark asks you to confirm uses ofembark-act-all; you can turn this off by setting the user optionembark-confirm-act-alltonil.) - The
embark-collectcommand produces a buffer listing all the current candidates, for you to peruse and run actions on at your leisure. The candidates are displayed as a list showing additional annotations. If any of the candidates contain newlines, then horizontal lines are used to separate candidates.The Embark Collect buffer is somewhat “dired-like”: you can select and deselect candidates through
embark-select(available as an action inembark-act, bound toSPC; but you could also give it a global key binding). In an Embark Collect bufferembark-actis bound toaandembark-act-allis bound toA;embark-act-allwill act on all currently marked candidates if there any, and will act on all candidates if none are marked. In particular, this means thata SPCwill toggle whether the candidate at point is selected, andA SPCwill select all candidates if none are selected, or deselect all selected candidates if there are some. - The
embark-exportcommand tries to open a buffer in an appropriate major mode for the set of candidates. If the candidates are files export produces a Dired buffer; if they are buffers, you get an Ibuffer buffer; and if they are packages you get a buffer in package menu mode.If you use the grepping commands from the Consult package,
consult-grep,consult-git-greporconsult-ripgrep, then you should install theembark-consultpackage, which adds support for exporting a list of grep results to an honest grep-mode buffer, on which you can even use wgrep if you wish.
When in doubt choosing between exporting and collecting, a good rule
of thumb is to always prefer embark-export since when an exporter to a
special major mode is available for a given type of target, it will be
more featureful than an Embark collect buffer, and if no such exporter
is configured the embark-export command falls back to the generic
embark-collect.
These commands are always available as “actions” (although they do not
act on just the current target but on all candidates) for embark-act
and are bound to A, S (for “snapshot”), and E, respectively, in
embark-general-map. This means that you do not have to bind your own
key bindings for these (although you can, of course!), just a key
binding for embark-act.
In Embark Collect or Embark Export buffers that were obtained by
running embark-collect or embark-export from within a minibuffer
completion session, g is bound to a command that restarts the
completion session, that is, the command that opened the minibuffer is
run again and the minibuffer contents restored. You can then interact
normally with the command, perhaps editing the minibuffer contents,
and, if you wish, you can rerun embark-collect or embark-export to get
an updated buffer.
The commands for working with sets of candidates just described,
namely embark-act-all, embark-export and embark-collect by default
work with all candidates defined in the current context. For example,
in the minibuffer they operate on all currently completion candidates,
or in a dired buffer they work on all marked files (or all files if
none are marked). Embark also has a notion of selection, where you can
accumulate an ad hoc list of targets for these commands to work on.
The selection is controlled by using the embark-select action, bound
to SPC in embark-general-map so that it is always available (you can
also give embark-select a global key binding if you wish; when called
directly, not as an action for embark-act, it will select the first
target at point). Calling this action on a target toggles its
membership in the current buffer’s Embark selection; that is, it adds
it to selection if not selected and removes it from the selection if
it was selected. Whenever the selection for a buffer is non-empty, the
commands embark-act-all, embark-export and embark-collect will act on
the selection.
To deselect all selected targets, you can use the embark-select action
through embark-act-all, since this will run embark-select on each
member of the current selection. Similarly if no targets are selected
and you are in a minibuffer completion session, running embark-select
from embark-act-all will select all the current completion candidates.
By default, whenever some targets are selected in the current buffer,
a count of selected targets appears in the mode line. This can be
turned off or customized through the embark-selection-indicator user
option.
The selection functionality is supported in every buffer:
- In the minibuffer this gives a convenient way to act on several
completion candidates that don’t follow any simple pattern: just go
through the completions selecting the ones you want, then use
embark-act-all. For example, you could attach several files at once to an email. - For Embark Collect buffers this functionality enables a dired-like workflow, in which you mark various candidates and apply an action to all at once. (It supersedes a previous ad hoc dired-like interface that was implemented only in Embark Collect buffers, with a slightly different interface.)
- In a eww buffer you could use this to select various links you wish
to follow up on, and then collect them into a buffer. Similarly,
while reading Emacs’s info manual you could select some symbols you
want to read more about and export them to an
apropos-modebuffer. - You can use selections in regular text or programming buffers to do complex editing operations. For example, if you have three paragraphs scattered over a file and you want to bring them together, you can select each one, insert them all somewhere and finally delete all of them (from their original locations).
Finally, there is also an embark-live variant of the embark-collect
command which automatically updates the collection after each change
in the source buffer. Users of a completion UI that automatically
updates and displays the candidate list (such as Vertico, Icomplete,
Fido-mode, or MCT) will probably not want to use
embark-live from the minibuffer as they will then have two live
updating displays of the completion candidates!
A more likely use of embark-live is to be called from a regular buffer
to display a sort of live updating “table of contents” for the buffer.
This depends on having appropriate candidate collectors configured in
embark-candidate-collectors. There are not many in Embark’s default
configuration, but you can try this experiment: open a dired buffer in
a directory that has very many files, mark a few, and run embark-live.
You’ll get an Embark Collect buffer containing only the marked files,
which updates as you mark or unmark files in dired. To make
embark-live genuinely useful other candidate collectors are required.
The embark-consult package (documented near the end of this manual)
contains a few: one for imenu items and one for outline headings as
used by outline-minor-mode. Those collectors really do give
embark-live a table-of-contents feel.
Embark also has the embark-become command which is useful for when
you run a command, start typing at the minibuffer and realize you
meant a different command. The most common case for me is that I run
switch-to-buffer, start typing a buffer name and realize I haven’t
opened the file I had in mind yet! I’ll use this situation as a
running example to illustrate embark-become. When this happens I can,
of course, press C-g and then run find-file and open the file, but
this requires retyping the portion of the file name you already
typed. This process can be streamlined with embark-become: while still
in the switch-to-buffer you can run embark-become and effectively
make the switch-to-buffer command become find-file for this run.
You can bind embark-become to a key in minibuffer-local-map, but it is
also available as an action under the letter B (uppercase), so you
don’t need a binding if you already have one for embark-act. So,
assuming I have embark-act bound to, say, C-., once I realize I
haven’t open the file I can type C-. B C-x C-f to have
switch-to-buffer become find-file without losing what I have already
typed in the minibuffer.
But for even more convenience, embark-become offers shorter key
bindings for commands you are likely to want the current command to
become. When you use embark-become it looks for the current command in
all keymaps named in the list embark-become-keymaps and then activates
all keymaps that contain it. For example, the default value of
embark-become-keymaps contains a keymap embark-become-file+buffer-map
with bindings for several commands related to files and buffers, in
particular, it binds switch-to-buffer to b and find-file to f. So when
I accidentally try to switch to a buffer for a file I haven’t opened
yet, embark-become finds that the command I ran, switch-to-buffer, is
in the keymap embark-become-file+buffer-map, so it activates that
keymap (and any others that also contain a binding for
switch-to-buffer). The end result is that I can type C-. B f to
switch to find-file.
The easiest way to install Embark is from GNU ELPA, just run M-x
package-install RET embark RET. (It is also available on MELPA.) It is
highly recommended to also install Marginalia (also available on GNU
ELPA), so that Embark can offer you preconfigured actions in more
contexts. For use-package users, the following is a very reasonable
starting configuration:
(use-package marginalia
:ensure t
:config
(marginalia-mode))
(use-package embark
:ensure t
:bind
(("C-." . embark-act) ;; pick some comfortable binding
("C-;" . embark-dwim) ;; good alternative: M-.
("C-h B" . embark-bindings)) ;; alternative for `describe-bindings'
:init
;; Optionally replace the key help with a completing-read interface
(setq prefix-help-command #'embark-prefix-help-command)
;; Show the Embark target at point via Eldoc. You may adjust the
;; Eldoc strategy, if you want to see the documentation from
;; multiple providers. Beware that using this can be a little
;; jarring since the message shown in the minibuffer can be more
;; than one line, causing the modeline to move up and down:
;; (add-hook 'eldoc-documentation-functions #'embark-eldoc-first-target)
;; (setq eldoc-documentation-strategy #'eldoc-documentation-compose-eagerly)
:config
;; Hide the mode line of the Embark live/completions buffers
(add-to-list 'display-buffer-alist
'("\\`\\*Embark Collect \\(Live\\|Completions\\)\\*"
nil
(window-parameters (mode-line-format . none)))))
;; Consult users will also want the embark-consult package.
(use-package embark-consult
:ensure t ; only need to install it, embark loads it after consult if found
:hook
(embark-collect-mode . consult-preview-at-point-mode))About the suggested key bindings for embark-act and embark-dwim:
- Those key bindings are unlikely to work in the terminal, but terminal users are probably well aware of this and will know to select different bindings.
- The suggested
C-.binding is used by default in (at least some installations of) GNOME to input emojis, and Emacs doesn’t even get a chance to respond to the binding. You can select a different key binding forembark-actor useibus-setupto change the shortcut for emoji insertion (Emacs 29 will likely useC-x 8 e e, in case you want to set the same one system-wide). - The suggested alternative of
M-.forembark-dwimis bound by default toxref-find-definitions. That is a very useful command but overwriting it withembark-dwimis sensible since in Embark’s default configuration,embark-dwimwill also find the definition of the identifier at point. (Note thatxref-find-definitionswith a prefix argument prompts you for an identifier,embark-dwimdoes not cover this case).
Other Embark commands such as embark-act-all, embark-become,
embark-collect, and embark-export can be run through embark-act as
actions bound to A, B, S (for “snapshot”), and E respectively, and
thus don’t really need a dedicated key binding, but feel free to bind
them directly if you so wish. If you do choose to bind them directly,
you’ll probably want to bind them in minibuffer-local-map, since they
are most useful in the minibuffer (in fact, embark-become only works
in the minibuffer).
The command embark-dwim executes the default action at point. Another good
keybinding for embark-dwim is M-. since embark-dwim acts like
xref-find-definitions on the symbol at point. C-. can be seen as a
right-click context menu at point and M-. acts like left-click. The
keybindings are mnemonic, both act at the point (.).
Embark needs to know what your minibuffer completion system considers
to be the list of candidates and which one is the current candidate.
Embark works out of the box if you use Emacs’s default tab completion,
the built-in icomplete-mode or fido-mode, or the third-party packages
Vertico or Ivy.
If you are a Helm or Ivy user you are unlikely to want Embark since those packages include comprehensive functionality for acting on minibuffer completion candidates. (Embark does come with Ivy integration despite this.)
By default, if you run embark-act and do not immediately select an
action, after a short delay Embark will pop up a buffer called *Embark
Actions* containing a list of available actions with their key
bindings. You can scroll that buffer with the mouse of with the usual
commands scroll-other-window and scroll-other-window-down (bound by
default to C-M-v and C-M-S-v).
That functionality is provided by the embark-mixed-indicator, but
Embark has other indicators that can provide information about the
target and its type, what other targets you can cycle to, and which
actions have key bindings in the action map for the current type of
target. Any number of indicators can be active at once and the user
option embark-indicators should be set to a list of the desired
indicators.
Embark comes with the following indicators:
embark-minimal-indicator: shows a messages in the echo area or minibuffer prompt showing the current target and the types of all targets starting with the current one.embark-highlight-indicator: highlights the target at point; on by default.embark-verbose-indicator: displays a table of actions and their key bindings in a buffer; this is not on by default, in favor of the mixed indicator described next.embark-mixed-indicator: starts out by behaving as the minimal indicator but after a short delay acts as the verbose indicator; this is on by default.embark-isearch-highlight-indicator: this only does something when the current target is the symbol at point, in which case it lazily highlights all occurrences of that symbol in the current buffer, like isearch; also on by default.
Users of the popular which-key package may prefer to use the
embark-which-key-indicator from the Embark wiki. Just copy its
definition from the wiki into your configuration and customize the
embark-indicators user option to exclude the mixed and verbose
indicators and to include embark-which-key-indicator.
As an alternative to reading the list of actions in the verbose or
mixed indicators (see the previous section for a description of
these), you can press the embark-help-key, which is C-h by default
(but you may prefer ? to free up C-h for use as a prefix) after
running embark-act. Pressing the help key will prompt you for the name
of an action with completion (but feel free to enter a command that is
not among the offered candidates!), and will also remind you of the
key bindings. You can press embark-keymap-prompter-key, which is @ by
default, at the prompt and then one of the key bindings to enter the
name of the corresponding action.
You may think that with the *Embark Actions* buffer popping up to
remind you of the key bindings you’d never want to use completion to
select an action by name, but personally I find that typing a small
portion of the action name to narrow down the list of candidates feels
significantly faster than visually scanning the entire list of actions.
If you find you prefer entering actions that way, you can configure
embark to always prompt you for actions by setting the variable
embark-prompter to embark-completing-read-prompter.
By default, if you call embark-act from the minibuffer it quits the
minibuffer after performing the action. You can change this by setting
the user option embark-quit-after-action to nil. Having embark-act not
quit the minibuffer can be useful to turn commands into little “thing
managers”. For example, you can use find-file as a little file manager
or describe-package as a little package manager: you can run those
commands, perform a series of actions, and then quit the command.
If you want to control the quitting behavior in a fine-grained manner
depending on the action, you can set embark-quit-after-action to an
alist, associating commands to either t for quitting or nil for not
quitting. When using an alist, you can use the special key t to
specify the default behavior. For example, to specify that by default
actions should not quit the minibuffer but that using kill-buffer as
an action should quit, you can use the following configuration:
(setq embark-quit-after-action '((kill-buffer . t) (t . nil)))The variable embark-quit-after-action only specifies a default, that
is, it only controls whether or not embark-act quits the minibuffer
when you call it without a prefix argument, and you can select the
opposite behavior to what the variable says by calling embark-act with
C-u. Also note that both the variable embark-quit-after-action and C-u
have no effect when you call embark-act outside the minibuffer.
If you find yourself using the quitting and non-quitting variants of
embark-act about equally often, independently of the action, you may
prefer to simply have separate commands for them instead of a single
command that you call with C-u half the time. You could, for example,
keep the default exiting behavior of embark-act and define a
non-quitting version as follows:
(defun embark-act-noquit ()
"Run action but don't quit the minibuffer afterwards."
(interactive)
(let ((embark-quit-after-action nil))
(embark-act)))You can customize what happens after the target is inserted at the
minibuffer prompt of an action. There are
embark-target-injection-hooks, that are run by default after injecting
the target into the minibuffer. The variable
embark-target-injection-hooks is an alist associating commands to
their setup hooks. There are two special keys: if no setup hook is
specified for a given action, the hook associated to t is run; and the
hook associated to :always is run regardless of the action. (This
variable used to have the less explicit name of
embark-setup-action-hooks, so please update your configuration.)
For example, consider using shell-command as an action during file
completion. It would be useful to insert a space before the target
file name and to leave the point at the beginning, so you can
immediately type the shell command to run on that file. That’s why in
Embark’s default configuration there is an entry in
embark-target-injection-hooks associating shell-command to a hook that
includes embark--shell-prep, a simple helper function that quotes all
the spaces in the file name, inserts an extra space at the beginning
of the line and leaves point to the left of it.
Now, the preparation that embark--shell-prep does would be useless if
Embark did what it normally does after it inserts the target of the
action at the minibuffer prompt, which is to “press RET” for you,
accepting the target as is; if Embark did that for shell-command you
wouldn’t get a chance to type in the command to execute! That is why
in Embark’s default configuration the entry for shell-command in
embark-target-injection-hooks also contains the function
embark--allow-edit.
Embark used to have a dedicated variable embark-allow-edit-actions to
which you could add commands for which Embark should forgo pressing
RET for you after inserting the target. Since its effect can also be
achieved via the general embark-target-injection-hooks mechanism, that
variable has been removed to simplify Embark. Be sure to update your
configuration; if you had something like:
(add-to-list 'embark-allow-edit-actions 'my-command)you should replace it with:
(push 'embark--allow-edit
(alist-get 'my-command embark-target-injection-hooks))Also note that while you could abuse embark--allow-edit so that you
have to confirm “dangerous” actions such as delete-file, it is better
to implement confirmation by adding the embark--confirm function to
the appropriate entry of a different hook alist, namely,
embark-pre-action-hooks.
Besides embark--allow-edit, Embark comes with another function that is
of general utility in action setup hooks: embark--ignore-target. Use
it for commands that do prompt you in the minibuffer but for which
inserting the target would be inappropriate. This is not a common
situation but does occasionally arise. For example it is used by
default for shell-command-on-region: that command is used as an action
for region targets, and it prompts you for a shell command; you
typically do not want the target, that is the contents of the region,
to be entered at that prompt!
Embark has three variables, embark-pre-action-hooks,
embark-post-action-hooks and embark-around-action-hooks, which are
alists associating commands to hooks that should run before or after
or as around advice for the command when used as an action. As with
embark-target-injection-hooks, there are two special keys for the
alists: t designates the default hook to run when no specific hook is
specified for a command; and the hook associated to :always runs
regardless.
The default values of those variables are fairly extensive, adding
creature comforts to make running actions a smooth experience. Embark
comes with several functions intended to be added to these hooks, and
used in the default values of embark-pre-action-hooks,
embark-post-action-hooks and embark-around-action-hooks.
For pre-action hooks:
embark--confirm- Prompt the user for confirmation before executing
the action. This is used be default for commands deemed “dangerous”,
or, more accurately, hard to undo, such as
delete-fileandkill-buffer. embark--unmark-target- Unmark the active region. Use this for
commands you want to act on the region contents but without the
region being active. The default configuration uses this function as
a pre-action hook for
occurandquery-replace, for example, so that you can use them as actions with region targets to search the whole buffer for the text contained in the region. Without this pre-action hook usingoccuras an action for a region target would be pointless: it would search for the the region contents in the region, (typically, due to the details of regexps) finding only one match! embark--beginning-of-target- Move to the beginning of the target
(for targets that report bounds). This is used by default for
backward motion commands such as
backward-sexp, so that they don’t accidentally leave you on the current target. embark--end-of-target- Move to the end of the target. This is used
similarly to the previous function, but also for commands that act
on the last s-expression like
eval-last-sexp. This allow you to act on an s-expression from anywhere inside it and still useeval-last-sexpas an action. embark--xref-push-markers- Push the current location on the xref
marker stack. Use this for commands that take you somewhere and for
which you’d like to be able to come back to where you were using
xref-pop-marker-stack. This is used by default forfind-library.
For post-action hooks:
embark--restart- Restart the command currently prompting in the
minibuffer, so that the list of completion candidates is updated.
This is useful as a post action hook for commands that delete or
rename a completion candidate; for example the default value of
embark-post-action-hooksuses it fordelete-file,kill-buffer,rename-file,rename-buffer, etc.
For around-action hooks:
embark--mark-target- Save existing mark and point location, mark
the target and run the action. Most targets at point outside the
minibuffer report which region of the buffer they correspond to
(this is the information used by
embark-highlight-indicatorto know what portion of the buffer to highlight); this function marks that region. It is useful as an around action hook for commands that expect a region to be marked, for example, it is used by default forindent-regionso that it works on s-expression targets, or forfill-regionso that it works on paragraph targets. embark--cd- Run the action with
default-directoryset to the directory associated to the current target. The target should be of typefile,buffer,bookmarkorlibrary, and the associated directory is what you’d expect in each case. embark--narrow-to-target- Run the action with buffer narrowed to
current target. Use this as an around hook to localize the effect of
actions that don’t already work on just the region. In the default
configuration it is used for
repunctuate-sentences. embark--save-excursion- Run the action restoring point at the end. The current default configuration doesn’t use this but it is available for users.
All internal keymaps are defined with the standard helper macro
defvar-keymap. For example a simple version of the file action keymap
could be defined as follows:
(defvar-keymap embark-file-map
:doc "Example keymap with a few file actions"
:parent embark-general-map
"d" #'delete-file
"r" #'rename-file
"c" #'copy-file)These action keymaps are perfectly normal Emacs
keymaps. You may want to inherit from the embark-general-map if you
want to access the default Embark actions. Note that embark-collect
and embark-export are also made available via embark-general-map.
It is easy to configure Embark to provide actions for new types of targets, either in the minibuffer or outside it. I present below two very detailed examples of how to do this. At several points I’ll explain more than one way to proceed, typically with the easiest option first. I include the alternative options since there will be similar situations where the easiest option is not available.
As an example, take the new tab bars from Emacs 27. I’ll explain how to configure Embark to offer tab-specific actions when you use the tab-bar-mode commands that mention tabs by name. The configuration explained here is now built-in to Embark (and Marginalia), but it’s still a good self-contained example. In order to setup up tab actions you would need to: (1) make sure Embark knows those commands deal with tabs, (2) define a keymap for tab actions and configure Embark so it knows that’s the keymap you want.
For step (1), it would be great if the tab-bar-mode commands reported
the completion category tab when asking you for a tab with
completion. (All built-in Emacs commands that prompt for file names,
for example, do have metadata indicating that they want a file.) They
do not, unfortunately, and I will describe a couple of ways to deal
with this.
Maybe the easiest thing is to configure Marginalia to enhance those
commands. All of the tab-bar-*-tab-by-name commands have the words
“tab by name” in the minibuffer prompt, so you can use:
(add-to-list 'marginalia-prompt-categories '("tab by name" . tab))That’s it! But in case you are ever in a situation where you don’t
already have commands that prompt for the targets you want, I’ll
describe how writing your own command with appropriate category
metadata looks:
(defun my-select-tab-by-name (tab)
(interactive
(list
(let ((tab-list (or (mapcar (lambda (tab) (cdr (assq 'name tab)))
(tab-bar-tabs))
(user-error "No tabs found"))))
(completing-read
"Tabs: "
(lambda (string predicate action)
(if (eq action 'metadata)
'(metadata (category . tab))
(complete-with-action
action tab-list string predicate)))))))
(tab-bar-select-tab-by-name tab))As you can see, the built-in support for setting the category
meta-datum is not very easy to use or pretty to look at. To help with
this I recommend the consult--read function from the excellent
Consult package. With that function we can rewrite the command as
follows:
(defun my-select-tab-by-name (tab)
(interactive
(list
(let ((tab-list (or (mapcar (lambda (tab) (cdr (assq 'name tab)))
(tab-bar-tabs))
(user-error "No tabs found"))))
(consult--read tab-list
:prompt "Tabs: "
:category 'tab))))
(tab-bar-select-tab-by-name tab))Much nicer! No matter how you define the my-select-tab-by-name
command, the first approach with Marginalia and prompt detection has
the following advantages: you get the tab category for all the
tab-bar-*-bar-by-name commands at once, also, you enhance built-in
commands, instead of defining new ones.
Let’s say we want to offer select, rename and close actions for tabs (in addition to Embark general actions, such as saving the tab name to the kill-ring, which you get for free). Then this will do:
(defvar-keymap embark-tab-actions
:doc "Keymap for actions for tab-bar tabs (when mentioned by name)."
:parent embark-general-map
"s" #'tab-bar-select-tab-by-name
"r" #'tab-bar-rename-tab-by-name
"k" #'tab-bar-close-tab-by-name)
(add-to-list 'embark-keymap-alist '(tab . embark-tab-actions))What if after using this for a while you feel closing the tab without confirmation is dangerous? You have a couple of options:
- You can keep using the
tab-bar-close-tab-by-namecommand, but have Embark ask you for confirmation:(push #'embark--confirm (alist-get 'tab-bar-close-tab-by-name embark-pre-action-hooks))
- You can write your own command that prompts for confirmation and
use that instead of
tab-bar-close-tab-by-namein the above keymap:(defun my-confirm-close-tab-by-name (tab) (interactive "sTab to close: ") (when (y-or-n-p (format "Close tab '%s'? " tab)) (tab-bar-close-tab-by-name tab)))
Notice that this is a command you can also use directly from
M-xindependently of Embark. Using it fromM-xleaves something to be desired, though, since you don’t get completion for the tab names. You can fix this if you wish as described in the previous section.
Say you want to teach Embark to treat text of the form
wikipedia:Garry_Kasparov in any regular buffer as a link to Wikipedia,
with actions to open the Wikipedia page in eww or an external browser
or to save the URL of the page in the kill-ring. We can take advantage
of the actions that Embark has preconfigured for URLs, so all we need
to do is teach Embark that wikipedia:Garry_Kasparov stands for the URL
https://en.wikipedia.org/wiki/Garry_Kasparov.
You can be as fancy as you want with the recognized syntax. Here, to
keep the example simple, I’ll assume the link matches the regexp
wikipedia:[[:alnum:]_]+. We will write a function that looks for a
match surrounding point, and returns a dotted list of the form '(url
URL-OF-THE-PAGE START . END) where START and END are the buffer
positions bounding the target, and are used by Embark to highlight it
if you have embark-highlight-indicator included in the list
embark-indicators. (There are a couple of other options for the return
value of a target finder: the bounding positions are optional and a
single target finder is allowed to return multiple targets; see the
documentation for embark-target-finders for details.)
(defun my-short-wikipedia-link ()
"Target a link at point of the form wikipedia:Page_Name."
(save-excursion
(let* ((start (progn (skip-chars-backward "[:alnum:]_:") (point)))
(end (progn (skip-chars-forward "[:alnum:]_:") (point)))
(str (buffer-substring-no-properties start end)))
(save-match-data
(when (string-match "wikipedia:\\([[:alnum:]_]+\\)" str)
`(url
,(format "https://en.wikipedia.org/wiki/%s"
(match-string 1 str))
,start . ,end))))))
(add-to-list 'embark-target-finders 'my-short-wikipedia-link)Embark actions are normal Emacs commands, that is, functions with an
interactive specification. In order to execute an action, Embark
calls the command with call-interactively, so the command reads user
input exactly as if run directly by the user. For example the
command may open a minibuffer and read a string
(read-from-minibuffer) or open a completion interface
(completing-read). If this happens, Embark takes the target string
and inserts it automatically into the minibuffer, simulating user
input this way. After inserting the string, Embark exits the
minibuffer, submitting the input. (The immediate minibuffer exit can
be disabled for specific actions in order to allow editing the
input; this is done by adding the embark--allow-edit function to the
appropriate entry of embark-target-injection-hooks). Embark inserts
the target string at the first minibuffer opened by the action
command, and if the command happens to prompt the user for input
more than once, the user still interacts with the second and further
prompts in the normal fashion. Note that if a command does not
prompt the user for input in the minibuffer, Embark still allows you
to use it as an action, but of course, never inserts the target
anywhere. (There are plenty of examples in the default configuration
of commands that do not prompt the user bound to keys in the action
maps, most of the region actions, for instance.)
This is how Embark manages to reuse normal commands as actions. The mechanism allows you to use as Embark actions commands that were not written with Embark in mind (and indeed almost all actions that are bound by default in Embark’s action keymaps are standard Emacs commands). It also allows you to write new custom actions in such a way that they are useful even without Embark.
Staring from version 28.1, Emacs has a variable
y-or-n-p-use-read-key, which when set to t causes y-or-n-p to use
read-key instead of read-from-minibuffer. Setting
y-or-n-p-use-read-key to t is recommended for Embark users because
it keeps Embark from attempting to insert the target at a y-or-n-p
prompt, which would almost never be sensible. Also consider this as
a warning to structure your own action commands so that if they use
y-or-n-p, they do so only after the prompting for the target.
Here is a simple example illustrating the various ways of reading
input from the user mentioned above. Bind the following commands to
the embark-symbol-map to be used as actions, then put the point on
some symbol and run them with embark-act:
(defun example-action-command1 ()
(interactive)
(message "The input was `%s'." (read-from-minibuffer "Input: ")))
(defun example-action-command2 (arg input1 input2)
(interactive "P\nsInput 1: \nsInput 2: ")
(message "The first input %swas `%s', and the second was `%s'."
(if arg "truly " "")
input1
input2))
(defun example-action-command3 ()
(interactive)
(message "Your selection was `%s'."
(completing-read "Select: " '("E" "M" "B" "A" "R" "K"))))
(defun example-action-command4 ()
(interactive)
(message "I don't prompt you for input and thus ignore the target!"))
(keymap-set embark-symbol-map "X 1" #'example-action-command1)
(keymap-set embark-symbol-map "X 2" #'example-action-command2)
(keymap-set embark-symbol-map "X 3" #'example-action-command3)
(keymap-set embark-symbol-map "X 4" #'example-action-command4)Also note that if you are using the key bindings to call actions,
you can pass prefix arguments to actions in the normal way. For
example, you can use C-u X2 with the above demonstration actions to
make the message printed by example-action-command2 more emphatic.
This ability to pass prefix arguments to actions is useful for some
actions in the default configuration, such as
embark-shell-command-on-buffer.
Alternatively, Embark does support one other type of action: a non-interactive function of a single argument. The target is passed as argument to the function. For example:
(defun example-action-function (target)
(message "The target was `%s'." target))
(keymap-set embark-symbol-map "X 4" #'example-action-function)Note that normally binding non-interactive functions in a keymap is useless, since when attempting to run them using the key binding you get an error message similar to “Wrong type argument: commandp, example-action-function”. In general it is more flexible to write any new Embark actions as commands, that is, as interactive functions, because that way you can also run them directly, without Embark. But there are a couple of reasons to use non-interactive functions as actions:
- You may already have the function lying around, and it is convenient to simply reuse it.
- For command actions the targets can only be simple string, with no text properties. For certain advanced uses you may want the action to receive a string with some text properties, or even a non-string target.
Embark cooperates well with the Marginalia and Consult packages. Neither of those packages is a dependency of Embark, but both are highly recommended companions to Embark, for opposite reasons: Marginalia greatly enhances Embark’s usefulness, while Embark can help enhance Consult.
In the remainder of this section I’ll explain what exactly Marginalia does for Embark, and what Embark can do for Consult.
Embark comes with actions for symbols (commands, functions, variables
with actions such as finding the definition, looking up the
documentation, evaluating, etc.) in the embark-symbol-map keymap, and
for packages (actions like install, delete, browse url, etc.) in the
embark-package-keymap.
Unfortunately Embark does not automatically offers you these keymaps
when relevant, because many built-in Emacs commands don’t report
accurate category metadata. For example, a command like
describe-package, which reads a package name from the minibuffer,
does not have metadata indicating this fact.
In an earlier Embark version, there were functions to supply this
missing metadata, but they have been moved to Marginalia, which
augments many Emacs command to report accurate category metadata.
Simply activating marginalia-mode allows Embark to offer you the
package and symbol actions when appropriate again. Candidate
annotations in the Embark collect buffer are also provided by the
Marginalia package:
- If you install Marginalia and activate
marginalia-mode, Embark Collect buffers will use the Marginalia annotations automatically. - If you don’t install Marginalia, you will see only the annotations
that come with Emacs (such as key bindings in
M-x, or the unicode characters inC-x 8 RET).
The excellent Consult package provides many commands that use
minibuffer completion, via the completing-read function; plenty of its
commands can be considered enhanced versions of built-in Emacs
commands, and some are completely new functionality. One common
enhancement provided in all commands for which it makes sense is
preview functionality, for example consult-buffer will show you a
quick preview of a buffer before you actually switch to it.
If you use both Consult and Embark you should install the
embark-consult package which provides integration between the two. It
provides exporters for several Consult commands and also tweaks the
behavior of many Consult commands when used as actions with embark-act
in subtle ways that you may not even notice, but make for a smoother
experience. You need only install it to get these benefits: Embark
will automatically load it after Consult if found.
The embark-consult package provides the following exporters:
- You can use
embark-exportfromconsult-line,consult-outline, orconsult-markto obtain anoccur-modebuffer. As with the built-inoccurcommand you use that buffer to jump to a match and after that, you can then usenext-errorandprevious-errorto navigate to other matches. You can also presseto activateoccur-edit-modeand edit the matches in place! - You can export from any of the Consult asynchronous search commands,
consult-grep,consult-git-grep, orconsult-ripgrepto get agrep-modebuffer. Here too you can usenext-errorandprevious-errorto navigate among matches, and, if you install the wgrep package, you can use it to edit the matches in place.
In both cases, pressing g will rerun the Consult command you had
exported from and re-enter the input you had typed (which is similar
to reverting but a little more flexible). You can then proceed to
re-export if that’s what you want, but you can also edit the input
changing the search terms or simply cancel if you see you are done
with that search.
The embark-consult also contains some candidates collectors that allow
you to run embark-live to get a live-updating table of contents for
your buffer:
embark-consult-outline-candidatesproduces the outline headings of the current buffer, usingconsult-outline.embark-consult-imenu-candidatesproduces the imenu items of the current buffer, usingconsult-imenu.embark-consult-imenu-or-outline-candidatesis a simple combination of the two previous functions: it produces imenu items in buffers deriving fromprog-modeand otherwise outline headings.
The way to configure embark-live (or embark-collect and embark-export
for that matter) to use one of these function is to add it at the end
of the embark-candidate-collectors list. The embark-consult package by
default adds the last one, which seems to be the most sensible
default.
Besides those exporters and candidate collectors, the embark-consult
package provides many subtle tweaks and small integrations between
Embark and Consult. Some examples are:
- When used as actions, the asynchronous search commands will search
only the files associated to the targets: if the targets are files,
it searches those files; for buffers it will search either the
associated file if there is one, else all files in the buffer’s
default-directory; for bookmarks it will search the file they point to, same for Emacs Lisp libraries. This is particularly powerful when usingembark-act-allto act on multiple files at once, for example you can useconsult-findto search among file names and thenembark-act-allandconsult-grepto search within the matching files.- For all other target types, those that do not have a sensible notion of associated file, a Consult search command (asynchronous or not) will search for the text of the target but leave the minibuffer open so you can interact with the Consult command.
consult-imenuwill search for the target and take you directly to the location if it matches a unique imenu entry, otherwise it will leave the minibuffer open so you can navigate among the matches.
There are several packages that offer functionality similar to Embark’s.
- Acting on minibuffer completion candidates
- The popular Ivy and Helm packages have support for acting on the completion candidates of commands written using their APIs, and there is an extensive ecosystem of packages meant for Helm and for Ivy (the Ivy ones usually have “counsel” in the name) providing commands and appropriate actions.
- Acting on things at point
- The built-in
context-menu-modeprovides a mouse-driven context-sensitive configurable menu. Thedo-at-pointpackage by Philip Kaludercic (available on GNU ELPA), on the other hand is keyboard-driven. - Collecting completion candidates into a buffer
- The Ivy package
has the command
ivy-occurwhich is similar toembark-collect. As with Ivy actions,ivy-occuronly works for commands written using the Ivy API.
If you want to learn more about how others have used Embark here are some links to read:
- Fifteen ways to use Embark, a blog post by Karthik Chikmagalur.
- Protesilaos Stavrou’s dotemacs, look for the section called “Extended minibuffer actions and more (embark.el and prot-embark.el)”
And some videos to watch:
- Embark and my extras by Protesilaos Stavrou.
- Embark – Key features and tweaks by Raoul Comninos on the Emacs-Elements YouTube channel.
- Livestreamed: Adding an Embark context action to send a stream message by Sacha Chua.
- System Crafters Live! - The Many Uses of Embark by David Wilson.
- Using Emacs Episode 80 - Vertico, Marginalia, Consult and Embark by Mike Zamansky.
Contributions to Embark are very welcome. There is a wish list for actions, target finders, candidate collectors and exporters. For other ideas you have for Embark, feel free to open an issue on the issue tracker. Any neat configuration tricks you find might be a good fit for the wiki.
Code contributions are very welcome too, but since Embark is now on GNU ELPA, copyright assignment to the FSF is required before you can contribute code.
While I, Omar Antolín Camarena, have written most of the Embark code and remain very stubborn about some of the design decisions, Embark has received substantial help from a number of other people which this document has neglected to mention for far too long. In particular, Daniel Mendler has been absolutely invaluable, implementing several important features, and providing a lot of useful advice.
Code contributions:
- Daniel Mendler
- Clemens Radermacher
- José Antonio Ortega Ruiz
- Itai Y. Efrat
- a13
- jakanakaevangeli
- mihakam
- Brian Leung
- Karthik Chikmagalur
- Roshan Shariff
- condy0919
- Damien Cassou
- JimDBh
Advice and useful discussions: