This document is generated from govc -h and govc $cmd -h commands.
The following common options are filtered out in this document,
but appear via govc $cmd -h:
-h Show this message
-cert= Certificate [GOVC_CERTIFICATE]
-debug=false Store debug logs [GOVC_DEBUG]
-trace=false Write SOAP/REST traffic to stderr
-verbose=false Write request/response data to stderr
-dump=false Enable output dump
-json=false Enable JSON output
-xml=false Enable XML output
-k=false Skip verification of server certificate [GOVC_INSECURE]
-key= Private key [GOVC_PRIVATE_KEY]
-persist-session=true Persist session to disk [GOVC_PERSIST_SESSION]
-tls-ca-certs= TLS CA certificates file [GOVC_TLS_CA_CERTS]
-tls-known-hosts= TLS known hosts file [GOVC_TLS_KNOWN_HOSTS]
-u= ESX or vCenter URL [GOVC_URL]
-vim-namespace=urn:vim25 Vim namespace [GOVC_VIM_NAMESPACE]
-vim-version=6.0 Vim version [GOVC_VIM_VERSION]
-dc= Datacenter [GOVC_DATACENTER]
-host.dns= Find host by FQDN
-host.ip= Find host by IP address
-host.ipath= Find host by inventory path
-host.uuid= Find host by UUID
-vm.dns= Find VM by FQDN
-vm.ip= Find VM by IP address
-vm.ipath= Find VM by inventory path
-vm.path= Find VM by path to .vmx file
-vm.uuid= Find VM by UUID
Contents
- about
- about.cert
- cluster.add
- cluster.change
- cluster.create
- cluster.group.change
- cluster.group.create
- cluster.group.ls
- cluster.group.remove
- cluster.module.create
- cluster.module.ls
- cluster.module.rm
- cluster.module.vm.add
- cluster.module.vm.rm
- cluster.mv
- cluster.override.change
- cluster.override.info
- cluster.override.remove
- cluster.rule.change
- cluster.rule.create
- cluster.rule.info
- cluster.rule.ls
- cluster.rule.remove
- cluster.stretch
- cluster.usage
- datacenter.create
- datacenter.info
- datastore.cluster.change
- datastore.cluster.info
- datastore.cp
- datastore.create
- datastore.disk.create
- datastore.disk.inflate
- datastore.disk.info
- datastore.disk.shrink
- datastore.download
- datastore.info
- datastore.ls
- datastore.maintenance.enter
- datastore.maintenance.exit
- datastore.mkdir
- datastore.mv
- datastore.remove
- datastore.rm
- datastore.tail
- datastore.upload
- datastore.vsan.dom.ls
- datastore.vsan.dom.rm
- device.boot
- device.cdrom.add
- device.cdrom.eject
- device.cdrom.insert
- device.clock.add
- device.connect
- device.disconnect
- device.floppy.add
- device.floppy.eject
- device.floppy.insert
- device.info
- device.ls
- device.pci.add
- device.pci.ls
- device.pci.remove
- device.remove
- device.scsi.add
- device.serial.add
- device.serial.connect
- device.serial.disconnect
- device.usb.add
- disk.create
- disk.ls
- disk.register
- disk.rm
- disk.snapshot.create
- disk.snapshot.ls
- disk.snapshot.rm
- disk.tags.attach
- disk.tags.detach
- dvs.add
- dvs.change
- dvs.create
- dvs.portgroup.add
- dvs.portgroup.change
- dvs.portgroup.info
- env
- events
- export.ovf
- extension.info
- extension.register
- extension.setcert
- extension.unregister
- fields.add
- fields.info
- fields.ls
- fields.rename
- fields.rm
- fields.set
- find
- firewall.ruleset.find
- folder.create
- folder.info
- guest.chmod
- guest.chown
- guest.df
- guest.download
- guest.getenv
- guest.kill
- guest.ls
- guest.mkdir
- guest.mktemp
- guest.mv
- guest.ps
- guest.rm
- guest.rmdir
- guest.run
- guest.start
- guest.touch
- guest.upload
- host.account.create
- host.account.remove
- host.account.update
- host.add
- host.autostart.add
- host.autostart.configure
- host.autostart.info
- host.autostart.remove
- host.cert.csr
- host.cert.import
- host.cert.info
- host.date.change
- host.date.info
- host.disconnect
- host.esxcli
- host.info
- host.maintenance.enter
- host.maintenance.exit
- host.option.ls
- host.option.set
- host.portgroup.add
- host.portgroup.change
- host.portgroup.info
- host.portgroup.remove
- host.reconnect
- host.remove
- host.service
- host.service.ls
- host.shutdown
- host.storage.info
- host.storage.mark
- host.storage.partition
- host.vnic.change
- host.vnic.hint
- host.vnic.info
- host.vnic.service
- host.vswitch.add
- host.vswitch.info
- host.vswitch.remove
- import.ova
- import.ovf
- import.spec
- import.vmdk
- library.checkin
- library.checkout
- library.clone
- library.cp
- library.create
- library.deploy
- library.export
- library.import
- library.info
- library.ls
- library.policy.ls
- library.publish
- library.rm
- library.session.ls
- library.session.rm
- library.subscriber.create
- library.subscriber.info
- library.subscriber.ls
- library.subscriber.rm
- library.sync
- library.trust.create
- library.trust.info
- library.trust.ls
- library.trust.rm
- library.update
- library.vmtx.info
- license.add
- license.assign
- license.assigned.ls
- license.decode
- license.label.set
- license.ls
- license.remove
- logs
- logs.download
- logs.ls
- ls
- metric.change
- metric.info
- metric.interval.change
- metric.interval.info
- metric.ls
- metric.reset
- metric.sample
- namespace.cluster.disable
- namespace.cluster.enable
- namespace.cluster.ls
- namespace.logs.download
- namespace.service.activate
- namespace.service.create
- namespace.service.deactivate
- namespace.service.info
- namespace.service.ls
- namespace.service.rm
- object.collect
- object.destroy
- object.method
- object.mv
- object.reload
- object.rename
- object.save
- option.ls
- option.set
- permissions.ls
- permissions.remove
- permissions.set
- pool.change
- pool.create
- pool.destroy
- pool.info
- role.create
- role.ls
- role.remove
- role.update
- role.usage
- session.login
- session.logout
- session.ls
- session.rm
- snapshot.create
- snapshot.remove
- snapshot.revert
- snapshot.tree
- sso.group.create
- sso.group.ls
- sso.group.rm
- sso.group.update
- sso.idp.default.ls
- sso.idp.default.update
- sso.idp.ldap.update
- sso.idp.ls
- sso.lpp.info
- sso.lpp.update
- sso.service.ls
- sso.user.create
- sso.user.id
- sso.user.ls
- sso.user.rm
- sso.user.update
- storage.policy.create
- storage.policy.info
- storage.policy.ls
- storage.policy.rm
- tags.attach
- tags.attached.ls
- tags.category.create
- tags.category.info
- tags.category.ls
- tags.category.rm
- tags.category.update
- tags.create
- tags.detach
- tags.info
- tags.ls
- tags.rm
- tags.update
- task.cancel
- tasks
- tree
- vapp.destroy
- vapp.power
- vcsa.access.consolecli.get
- vcsa.access.consolecli.set
- vcsa.access.dcui.get
- vcsa.access.dcui.set
- vcsa.access.shell.get
- vcsa.access.shell.set
- vcsa.access.ssh.get
- vcsa.access.ssh.set
- vcsa.log.forwarding.info
- vcsa.net.proxy.info
- vcsa.shutdown.cancel
- vcsa.shutdown.get
- vcsa.shutdown.poweroff
- vcsa.shutdown.reboot
- version
- vm.change
- vm.clone
- vm.console
- vm.create
- vm.customize
- vm.destroy
- vm.disk.attach
- vm.disk.change
- vm.disk.create
- vm.guest.tools
- vm.info
- vm.instantclone
- vm.ip
- vm.keystrokes
- vm.markastemplate
- vm.markasvm
- vm.migrate
- vm.network.add
- vm.network.change
- vm.option.info
- vm.power
- vm.question
- vm.rdm.attach
- vm.rdm.ls
- vm.register
- vm.unregister
- vm.upgrade
- vm.vnc
- volume.ls
- volume.rm
- volume.snapshot.create
- volume.snapshot.ls
- volume.snapshot.rm
- vsan.change
- vsan.info
Usage: govc about [OPTIONS]
Display About info for HOST.
System information including the name, type, version, and build number.
Examples:
govc about
govc about -json | jq -r .About.ProductLineId
Options:
-c=false Include client info
-l=false Include service content
Usage: govc about.cert [OPTIONS]
Display TLS certificate info for HOST.
If the HOST certificate cannot be verified, about.cert will return with exit code 60 (as curl does).
If the '-k' flag is provided, about.cert will return with exit code 0 in this case.
The SHA1 thumbprint can also be used as '-thumbprint' for the 'host.add' and 'cluster.add' commands.
Examples:
govc about.cert -k -json | jq -r .ThumbprintSHA1
govc about.cert -k -show | sudo tee /usr/local/share/ca-certificates/host.crt
govc about.cert -k -thumbprint | tee -a ~/.govmomi/known_hosts
Options:
-show=false Show PEM encoded server certificate only
-thumbprint=false Output host hash and thumbprint only
Usage: govc cluster.add [OPTIONS]
Add HOST to CLUSTER.
The host is added to the cluster specified by the 'cluster' flag.
Examples:
thumbprint=$(govc about.cert -k -u host.example.com -thumbprint | awk '{print $2}')
govc cluster.add -cluster ClusterA -hostname host.example.com -username root -password pass -thumbprint $thumbprint
govc cluster.add -cluster ClusterB -hostname 10.0.6.1 -username root -password pass -noverify
Options:
-cluster= Cluster [GOVC_CLUSTER]
-connect=true Immediately connect to host
-force=false Force when host is managed by another VC
-hostname= Hostname or IP address of the host
-license= Assign license key
-noverify=false Accept host thumbprint without verification
-password= Password of administration account on the host
-thumbprint= SHA-1 thumbprint of the host's SSL certificate
-username= Username of administration account on the host
Usage: govc cluster.change [OPTIONS] CLUSTER...
Change configuration of the given clusters.
Examples:
govc cluster.change -drs-enabled -vsan-enabled -vsan-autoclaim ClusterA
govc cluster.change -drs-enabled=false ClusterB
govc cluster.change -drs-vmotion-rate=4 ClusterC
Options:
-drs-enabled=<nil> Enable DRS
-drs-mode= DRS behavior for virtual machines: manual, partiallyAutomated, fullyAutomated
-drs-vmotion-rate=0 Aggressiveness of vMotions (1-5)
-ha-enabled=<nil> Enable HA
-vsan-autoclaim=<nil> Autoclaim storage on cluster hosts
-vsan-enabled=<nil> Enable vSAN
Usage: govc cluster.create [OPTIONS] CLUSTER
Create CLUSTER in datacenter.
The cluster is added to the folder specified by the 'folder' flag. If not given,
this defaults to the host folder in the specified or default datacenter.
Examples:
govc cluster.create ClusterA
govc cluster.create -folder /dc2/test-folder ClusterB
Options:
-folder= Inventory folder [GOVC_FOLDER]
Usage: govc cluster.group.change [OPTIONS] NAME...
Set cluster group members.
Examples:
govc cluster.group.change -name my_group vm_a vm_b vm_c # set
govc cluster.group.change -name my_group vm_a vm_b vm_c $(govc cluster.group.ls -name my_group) vm_d # add
govc cluster.group.ls -name my_group | grep -v vm_b | xargs govc cluster.group.change -name my_group vm_a vm_b vm_c # remove
Options:
-cluster= Cluster [GOVC_CLUSTER]
-name= Cluster group name
Usage: govc cluster.group.create [OPTIONS]
Create cluster group.
One of '-vm' or '-host' must be provided to specify the group type.
Examples:
govc cluster.group.create -name my_vm_group -vm vm_a vm_b vm_c
govc cluster.group.create -name my_host_group -host host_a host_b host_c
Options:
-cluster= Cluster [GOVC_CLUSTER]
-host=false Create cluster Host group
-name= Cluster group name
-vm=false Create cluster VM group
Usage: govc cluster.group.ls [OPTIONS]
List cluster groups and group members.
Examples:
govc cluster.group.ls -cluster my_cluster
govc cluster.group.ls -cluster my_cluster -l | grep ClusterHostGroup
govc cluster.group.ls -cluster my_cluster -name my_group
Options:
-cluster= Cluster [GOVC_CLUSTER]
-l=false Long listing format
-name= Cluster group name
Usage: govc cluster.group.remove [OPTIONS]
Remove cluster group.
Examples:
govc cluster.group.remove -cluster my_cluster -name my_group
Options:
-cluster= Cluster [GOVC_CLUSTER]
-name= Cluster group name
Usage: govc cluster.module.create [OPTIONS]
Create cluster module.
This command will output the ID of the new module.
Examples:
govc cluster.module.create -cluster my_cluster
Options:
-cluster= Cluster [GOVC_CLUSTER]
Usage: govc cluster.module.ls [OPTIONS]
List cluster modules.
When -id is specified, that module's members are listed.
Examples:
govc cluster.module.ls
govc cluster.module.ls -json | jq .
govc cluster.module.ls -id module_id
Options:
-id= Module ID
Usage: govc cluster.module.rm [OPTIONS] ID
Delete cluster module ID.
Examples:
govc cluster.module.rm module_id
Options:
Usage: govc cluster.module.vm.add [OPTIONS] VM...
Add VM(s) to a cluster module.
Examples:
govc cluster.module.vm.add -id module_id $vm...
Options:
-id= Module ID
Usage: govc cluster.module.vm.rm [OPTIONS] VM...
Remove VM(s) from a cluster module.
Examples:
govc cluster.module.vm.rm -id module_id $vm...
Options:
-id= Module ID
Usage: govc cluster.mv [OPTIONS]
Move HOST to CLUSTER.
The hosts are moved to the cluster specified by the 'cluster' flag.
Examples:
govc cluster.mv -cluster ClusterA host1 host2
Options:
-cluster= Cluster [GOVC_CLUSTER]
Usage: govc cluster.override.change [OPTIONS]
Change cluster VM overrides.
Examples:
govc cluster.override.change -cluster cluster_1 -vm vm_1 -drs-enabled=false
govc cluster.override.change -cluster cluster_1 -vm vm_2 -drs-enabled -drs-mode fullyAutomated
govc cluster.override.change -cluster cluster_1 -vm vm_3 -ha-restart-priority high
govc cluster.override.change -cluster cluster_1 -vm vm_4 -ha-additional-delay 30
govc cluster.override.change -cluster cluster_1 -vm vm_5 -ha-ready-condition poweredOn
Options:
-cluster= Cluster [GOVC_CLUSTER]
-drs-enabled=<nil> Enable DRS
-drs-mode= DRS behavior for virtual machines: manual, partiallyAutomated, fullyAutomated
-ha-additional-delay=0 HA Additional Delay
-ha-ready-condition= HA VM Ready Condition (Start next priority VMs when): poweredOn, guestHbStatusGreen, appHbStatusGreen, useClusterDefault
-ha-restart-priority= HA restart priority: disabled, lowest, low, medium, high, highest
-vm= Virtual machine [GOVC_VM]
Usage: govc cluster.override.info [OPTIONS]
Cluster VM overrides info.
Examples:
govc cluster.override.info
govc cluster.override.info -json
Options:
-cluster= Cluster [GOVC_CLUSTER]
Usage: govc cluster.override.remove [OPTIONS]
Remove cluster VM overrides.
Examples:
govc cluster.override.remove -cluster cluster_1 -vm vm_1
Options:
-cluster= Cluster [GOVC_CLUSTER]
-vm= Virtual machine [GOVC_VM]
Usage: govc cluster.rule.change [OPTIONS] NAME...
Change cluster rule.
Examples:
govc cluster.rule.change -cluster my_cluster -name my_rule -enable=false
Options:
-cluster= Cluster [GOVC_CLUSTER]
-enable=<nil> Enable rule
-host-affine-group= Host affine group name
-host-anti-affine-group= Host anti-affine group name
-l=false Long listing format
-mandatory=<nil> Enforce rule compliance
-name= Cluster rule name
-vm-group= VM group name
Usage: govc cluster.rule.create [OPTIONS] NAME...
Create cluster rule.
Rules are not enabled by default, use the 'enable' flag to enable upon creation or cluster.rule.change after creation.
One of '-affinity', '-anti-affinity', '-depends' or '-vm-host' must be provided to specify the rule type.
With '-affinity' or '-anti-affinity', at least 2 vm NAME arguments must be specified.
With '-depends', vm group NAME and vm group dependency NAME arguments must be specified.
With '-vm-host', use the '-vm-group' flag combined with the '-host-affine-group' and/or '-host-anti-affine-group' flags.
Examples:
govc cluster.rule.create -name pod1 -enable -affinity vm_a vm_b vm_c
govc cluster.rule.create -name pod2 -enable -anti-affinity vm_d vm_e vm_f
govc cluster.rule.create -name pod3 -enable -mandatory -vm-host -vm-group my_vms -host-affine-group my_hosts
govc cluster.rule.create -name pod4 -depends vm_group_app vm_group_db
Options:
-affinity=false Keep Virtual Machines Together
-anti-affinity=false Separate Virtual Machines
-cluster= Cluster [GOVC_CLUSTER]
-depends=false Virtual Machines to Virtual Machines
-enable=<nil> Enable rule
-host-affine-group= Host affine group name
-host-anti-affine-group= Host anti-affine group name
-l=false Long listing format
-mandatory=<nil> Enforce rule compliance
-name= Cluster rule name
-vm-group= VM group name
-vm-host=false Virtual Machines to Hosts
Usage: govc cluster.rule.info [OPTIONS]
Provides detailed infos about cluster rules, their types and rule members.
Examples:
govc cluster.rule.info -cluster my_cluster
govc cluster.rule.info -cluster my_cluster -name my_rule
Options:
-cluster= Cluster [GOVC_CLUSTER]
-l=false Long listing format
-name= Cluster rule name
Usage: govc cluster.rule.ls [OPTIONS]
List cluster rules and rule members.
Examples:
govc cluster.rule.ls -cluster my_cluster
govc cluster.rule.ls -cluster my_cluster -name my_rule
govc cluster.rule.ls -cluster my_cluster -l
govc cluster.rule.ls -cluster my_cluster -name my_rule -l
Options:
-cluster= Cluster [GOVC_CLUSTER]
-l=false Long listing format
-name= Cluster rule name
Usage: govc cluster.rule.remove [OPTIONS]
Remove cluster rule.
Examples:
govc cluster.group.remove -cluster my_cluster -name my_rule
Options:
-cluster= Cluster [GOVC_CLUSTER]
-l=false Long listing format
-name= Cluster rule name
Usage: govc cluster.stretch [OPTIONS] CLUSTER
Convert a vSAN cluster into a stretched cluster
The vSAN cluster is converted to a stretched cluster with a witness host
specified by the 'witness' flag. The datastore hosts are placed into one
of two fault domains that are specified in each host list. The name of the
preferred fault domain can be specified by the 'preferred-fault-domain' flag.
Examples:
govc cluster.stretch -dc remote-site-1 \
-witness /dc-name/host/192.168.112.2 \
-first-fault-domain-hosts 192.168.113.121 \
-second-fault-domain-hosts 192.168.113.45,192.168.113.70 \
cluster-name
Options:
-first-fault-domain-hosts= Hosts to place in the first fault domain
-first-fault-domain-name=Primary Name of the first fault domain
-preferred-fault-domain=Primary Name of the preferred fault domain
-second-fault-domain-hosts= Hosts to place in the second fault domain
-second-fault-domain-name=Secondary Name of the second fault domain
-witness= Witness host for the stretched cluster
Usage: govc cluster.usage [OPTIONS] CLUSTER
Cluster resource usage summary.
Examples:
govc cluster.usage ClusterName
govc cluster.usage -S ClusterName # summarize shared storage only
govc cluster.usage -json ClusterName | jq -r .CPU.Summary.Usage
Options:
-S=false Exclude host local storage
Usage: govc datacenter.create [OPTIONS] NAME...
Create datacenter NAME.
Examples:
govc datacenter.create MyDC # create
govc object.destroy /MyDC # delete
Options:
-folder= Inventory folder [GOVC_FOLDER]
Usage: govc datacenter.info [OPTIONS] [PATH]...
Options:
Usage: govc datastore.cluster.change [OPTIONS] CLUSTER...
Change configuration of the given datastore clusters.
Examples:
govc datastore.cluster.change -drs-enabled ClusterA
govc datastore.cluster.change -drs-enabled=false ClusterB
Options:
-drs-enabled=<nil> Enable Storage DRS
-drs-mode= Storage DRS behavior: manual, automated
Usage: govc datastore.cluster.info [OPTIONS] [PATH]...
Display datastore cluster info.
Examples:
govc datastore.cluster.info
govc datastore.cluster.info MyDatastoreCluster
Options:
Usage: govc datastore.cp [OPTIONS] SRC DST
Copy SRC to DST on DATASTORE.
Examples:
govc datastore.cp foo/foo.vmx foo/foo.vmx.old
govc datastore.cp -f my.vmx foo/foo.vmx
govc datastore.cp disks/disk1.vmdk disks/disk2.vmdk
govc datastore.cp disks/disk1.vmdk -dc-target DC2 disks/disk2.vmdk
govc datastore.cp disks/disk1.vmdk -ds-target NFS-2 disks/disk2.vmdk
Options:
-dc-target= Datacenter destination (defaults to -dc)
-ds= Datastore [GOVC_DATASTORE]
-ds-target= Datastore destination (defaults to -ds)
-f=false If true, overwrite any identically named file at the destination
-t=true Use file type to choose disk or file manager
Usage: govc datastore.create [OPTIONS] HOST...
Create datastore on HOST.
Examples:
govc datastore.create -type nfs -name nfsDatastore -remote-host 10.143.2.232 -remote-path /share cluster1
govc datastore.create -type vmfs -name vmfsDatastore -disk=mpx.vmhba0:C0:T0:L0 cluster1
govc datastore.create -type local -name localDatastore -path /var/datastore host1
Options:
-disk= Canonical name of disk (VMFS only)
-force=false Ignore DuplicateName error if datastore is already mounted on a host
-host= Host system [GOVC_HOST]
-mode=readOnly Access mode for the mount point (readOnly|readWrite)
-name= Datastore name
-password= Password to use when connecting (CIFS only)
-path= Local directory path for the datastore (local only)
-remote-host= Remote hostname of the NAS datastore
-remote-path= Remote path of the NFS mount point
-type= Datastore type (NFS|NFS41|CIFS|VMFS|local)
-username= Username to use when connecting (CIFS only)
-version=<nil> VMFS major version
Usage: govc datastore.disk.create [OPTIONS] VMDK
Create VMDK on DS.
Examples:
govc datastore.mkdir disks
govc datastore.disk.create -size 24G disks/disk1.vmdk
govc datastore.disk.create disks/parent.vmdk disk/child.vmdk
Options:
-a=lsiLogic Disk adapter
-d=thin Disk format
-ds= Datastore [GOVC_DATASTORE]
-f=false Force
-size=10.0GB Size of new disk
-uuid= Disk UUID
Usage: govc datastore.disk.inflate [OPTIONS] VMDK
Inflate VMDK on DS.
Examples:
govc datastore.disk.inflate disks/disk1.vmdk
Options:
-ds= Datastore [GOVC_DATASTORE]
Usage: govc datastore.disk.info [OPTIONS] VMDK
Query VMDK info on DS.
Examples:
govc datastore.disk.info disks/disk1.vmdk
Options:
-c=false Chain format
-d=false Include datastore in output
-ds= Datastore [GOVC_DATASTORE]
-p=true Include parents
-uuid=false Include disk UUID
Usage: govc datastore.disk.shrink [OPTIONS] VMDK
Shrink VMDK on DS.
Examples:
govc datastore.disk.shrink disks/disk1.vmdk
Options:
-copy=<nil> Perform shrink in-place mode if false, copy-shrink mode otherwise
-ds= Datastore [GOVC_DATASTORE]
Usage: govc datastore.download [OPTIONS] SOURCE DEST
Copy SOURCE from DS to DEST on the local system.
If DEST name is "-", source is written to stdout.
Examples:
govc datastore.download vm-name/vmware.log ./local.log
govc datastore.download vm-name/vmware.log - | grep -i error
Options:
-ds= Datastore [GOVC_DATASTORE]
-host= Host system [GOVC_HOST]
Usage: govc datastore.info [OPTIONS] [PATH]...
Display info for Datastores.
Examples:
govc datastore.info
govc datastore.info vsanDatastore
# info on Datastores shared between cluster hosts:
govc object.collect -s -d " " /dc1/host/k8s-cluster host | xargs govc datastore.info -H
# info on Datastores shared between VM hosts:
govc ls /dc1/vm/*k8s* | xargs -n1 -I% govc object.collect -s % summary.runtime.host | xargs govc datastore.info -H
Options:
-H=false Display info for Datastores shared between hosts
Usage: govc datastore.ls [OPTIONS] [FILE]...
Options:
-R=false List subdirectories recursively
-a=false Do not ignore entries starting with .
-ds= Datastore [GOVC_DATASTORE]
-l=false Long listing format
-p=false Append / indicator to directories
Usage: govc datastore.maintenance.enter [OPTIONS] DATASTORE
Put DATASTORE in maintenance mode.
Examples:
govc datastore.cluster.change -drs-mode automated my-datastore-cluster # automatically schedule Storage DRS migration
govc datastore.maintenance.enter -ds my-datastore-cluster/datastore1
# no virtual machines can be powered on and no provisioning operations can be performed on the datastore during this time
govc datastore.maintenance.exit -ds my-datastore-cluster/datastore1
Options:
-ds= Datastore [GOVC_DATASTORE]
Usage: govc datastore.maintenance.exit [OPTIONS] DATASTORE
Take DATASTORE out of maintenance mode.
Options:
-ds= Datastore [GOVC_DATASTORE]
Usage: govc datastore.mkdir [OPTIONS] DIRECTORY
Options:
-ds= Datastore [GOVC_DATASTORE]
-namespace=false Return uuid of namespace created on vsan datastore
-p=false Create intermediate directories as needed
Usage: govc datastore.mv [OPTIONS] SRC DST
Move SRC to DST on DATASTORE.
Examples:
govc datastore.mv foo/foo.vmx foo/foo.vmx.old
govc datastore.mv -f my.vmx foo/foo.vmx
Options:
-dc-target= Datacenter destination (defaults to -dc)
-ds= Datastore [GOVC_DATASTORE]
-ds-target= Datastore destination (defaults to -ds)
-f=false If true, overwrite any identically named file at the destination
-t=true Use file type to choose disk or file manager
Usage: govc datastore.remove [OPTIONS] HOST...
Remove datastore from HOST.
Examples:
govc datastore.remove -ds nfsDatastore cluster1
govc datastore.remove -ds nasDatastore host1 host2 host3
Options:
-ds= Datastore [GOVC_DATASTORE]
-host= Host system [GOVC_HOST]
Usage: govc datastore.rm [OPTIONS] FILE
Remove FILE from DATASTORE.
Examples:
govc datastore.rm vm/vmware.log
govc datastore.rm vm
govc datastore.rm -f images/base.vmdk
Options:
-ds= Datastore [GOVC_DATASTORE]
-f=false Force; ignore nonexistent files and arguments
-namespace=false Path is uuid of namespace on vsan datastore
-t=true Use file type to choose disk or file manager
Usage: govc datastore.tail [OPTIONS] PATH
Output the last part of datastore files.
Examples:
govc datastore.tail -n 100 vm-name/vmware.log
govc datastore.tail -n 0 -f vm-name/vmware.log
Options:
-c=-1 Output the last NUM bytes
-ds= Datastore [GOVC_DATASTORE]
-f=false Output appended data as the file grows
-host= Host system [GOVC_HOST]
-n=10 Output the last NUM lines
Usage: govc datastore.upload [OPTIONS] SOURCE DEST
Copy SOURCE from the local system to DEST on DS.
If SOURCE name is "-", read source from stdin.
Examples:
govc datastore.upload -ds datastore1 ./config.iso vm-name/config.iso
genisoimage ... | govc datastore.upload -ds datastore1 - vm-name/config.iso
Options:
-ds= Datastore [GOVC_DATASTORE]
Usage: govc datastore.vsan.dom.ls [OPTIONS] [UUID]...
List vSAN DOM objects in DS.
Examples:
govc datastore.vsan.dom.ls
govc datastore.vsan.dom.ls -ds vsanDatastore -l
govc datastore.vsan.dom.ls -l d85aa758-63f5-500a-3150-0200308e589c
Options:
-ds= Datastore [GOVC_DATASTORE]
-l=false Long listing
-o=false List orphan objects
Usage: govc datastore.vsan.dom.rm [OPTIONS] UUID...
Remove vSAN DOM objects in DS.
Examples:
govc datastore.vsan.dom.rm d85aa758-63f5-500a-3150-0200308e589c
govc datastore.vsan.dom.rm -f d85aa758-63f5-500a-3150-0200308e589c
govc datastore.vsan.dom.ls -o | xargs govc datastore.vsan.dom.rm
Options:
-ds= Datastore [GOVC_DATASTORE]
-f=false Force delete
-v=false Print deleted UUIDs to stdout, failed to stderr
Usage: govc device.boot [OPTIONS]
Configure VM boot settings.
Examples:
govc device.boot -vm $vm -delay 1000 -order floppy,cdrom,ethernet,disk
govc device.boot -vm $vm -order - # reset boot order
govc device.boot -vm $vm -firmware efi -secure
govc device.boot -vm $vm -firmware bios -secure=false
Options:
-delay=0 Delay in ms before starting the boot sequence
-firmware= Firmware type [bios|efi]
-order= Boot device order [-,floppy,cdrom,ethernet,disk]
-retry=false If true, retry boot after retry-delay
-retry-delay=0 Delay in ms before a boot retry
-secure=<nil> Enable EFI secure boot
-setup=false If true, enter BIOS setup on next boot
-vm= Virtual machine [GOVC_VM]
Usage: govc device.cdrom.add [OPTIONS]
Add CD-ROM device to VM.
Examples:
govc device.cdrom.add -vm $vm
govc device.ls -vm $vm | grep ide-
govc device.cdrom.add -vm $vm -controller ide-200
govc device.info cdrom-*
Options:
-controller= IDE controller name
-vm= Virtual machine [GOVC_VM]
Usage: govc device.cdrom.eject [OPTIONS]
Eject media from CD-ROM device.
If device is not specified, the first CD-ROM device is used.
Examples:
govc device.cdrom.eject -vm vm-1
govc device.cdrom.eject -vm vm-1 -device floppy-1
Options:
-device= CD-ROM device name
-vm= Virtual machine [GOVC_VM]
Usage: govc device.cdrom.insert [OPTIONS] ISO
Insert media on datastore into CD-ROM device.
If device is not specified, the first CD-ROM device is used.
Examples:
govc device.cdrom.insert -vm vm-1 -device cdrom-3000 images/boot.iso
Options:
-device= CD-ROM device name
-ds= Datastore [GOVC_DATASTORE]
-vm= Virtual machine [GOVC_VM]
Usage: govc device.clock.add [OPTIONS]
Add precision clock device to VM.
Examples:
govc device.clock.add -vm $vm
govc device.info clock-*
Options:
-vm= Virtual machine [GOVC_VM]
Usage: govc device.connect [OPTIONS] DEVICE...
Connect DEVICE on VM.
Examples:
govc device.connect -vm $name cdrom-3000
Options:
-vm= Virtual machine [GOVC_VM]
Usage: govc device.disconnect [OPTIONS] DEVICE...
Disconnect DEVICE on VM.
Examples:
govc device.disconnect -vm $name cdrom-3000
Options:
-vm= Virtual machine [GOVC_VM]
Usage: govc device.floppy.add [OPTIONS]
Add floppy device to VM.
Examples:
govc device.floppy.add -vm $vm
govc device.info floppy-*
Options:
-vm= Virtual machine [GOVC_VM]
Usage: govc device.floppy.eject [OPTIONS]
Eject image from floppy device.
If device is not specified, the first floppy device is used.
Examples:
govc device.floppy.eject -vm vm-1
Options:
-device= Floppy device name
-vm= Virtual machine [GOVC_VM]
Usage: govc device.floppy.insert [OPTIONS] IMG
Insert IMG on datastore into floppy device.
If device is not specified, the first floppy device is used.
Examples:
govc device.floppy.insert -vm vm-1 vm-1/config.img
Options:
-device= Floppy device name
-ds= Datastore [GOVC_DATASTORE]
-vm= Virtual machine [GOVC_VM]
Usage: govc device.info [OPTIONS] [DEVICE]...
Device info for VM.
Examples:
govc device.info -vm $name
govc device.info -vm $name disk-*
govc device.info -vm $name -json disk-* | jq -r .Devices[].Backing.Uuid
govc device.info -vm $name -json 'disk-*' | jq -r .Devices[].Backing.FileName # vmdk path
govc device.info -vm $name -json ethernet-0 | jq -r .Devices[].MacAddress
Options:
-net= Network [GOVC_NETWORK]
-net.adapter=e1000 Network adapter type
-net.address= Network hardware address
-vm= Virtual machine [GOVC_VM]
Usage: govc device.ls [OPTIONS]
List devices for VM.
Examples:
govc device.ls -vm $name
govc device.ls -vm $name disk-*
govc device.ls -vm $name -json | jq '.Devices[].Name'
Options:
-boot=false List devices configured in the VM's boot options
-vm= Virtual machine [GOVC_VM]
Usage: govc device.pci.add [OPTIONS] PCI_ADDRESS...
Add PCI Passthrough device to VM.
Examples:
govc device.pci.ls -vm $vm
govc device.pci.add -vm $vm $pci_address
govc device.info -vm $vm
Assuming vm name is helloworld, list command has below output
$ govc device.pci.ls -vm helloworld
System ID Address Vendor Name Device Name
5b087ce4-ce46-72c0-c7c2-28ac9e22c3c2 0000:60:00.0 Pensando Ethernet Controller 1
5b087ce4-ce46-72c0-c7c2-28ac9e22c3c2 0000:61:00.0 Pensando Ethernet Controller 2
To add only 'Ethernet Controller 1', command should be as below. No output upon success.
$ govc device.pci.add -vm helloworld 0000:60:00.0
To add both 'Ethernet Controller 1' and 'Ethernet Controller 2', command should be as below.
No output upon success.
$ govc device.pci.add -vm helloworld 0000:60:00.0 0000:61:00.0
$ govc device.info -vm helloworld
...
Name: pcipassthrough-13000
Type: VirtualPCIPassthrough
Label: PCI device 0
Summary:
Key: 13000
Controller: pci-100
Unit number: 18
Name: pcipassthrough-13001
Type: VirtualPCIPassthrough
Label: PCI device 1
Summary:
Key: 13001
Controller: pci-100
Unit number: 19
Options:
-vm= Virtual machine [GOVC_VM]
Usage: govc device.pci.ls [OPTIONS]
List allowed PCI passthrough devices that could be attach to VM.
Examples:
govc device.pci.ls -vm VM
Options:
-vm= Virtual machine [GOVC_VM]
Usage: govc device.pci.remove [OPTIONS] <PCI ADDRESS>...
Remove PCI Passthrough device from VM.
Examples:
govc device.info -vm $vm
govc device.pci.remove -vm $vm $pci_address
govc device.info -vm $vm
Assuming vm name is helloworld, device info command has below output
$ govc device.info -vm helloworld
...
Name: pcipassthrough-13000
Type: VirtualPCIPassthrough
Label: PCI device 0
Summary:
Key: 13000
Controller: pci-100
Unit number: 18
Name: pcipassthrough-13001
Type: VirtualPCIPassthrough
Label: PCI device 1
Summary:
Key: 13001
Controller: pci-100
Unit number: 19
To remove only 'pcipassthrough-13000', command should be as below. No output upon success.
$ govc device.pci.remove -vm helloworld pcipassthrough-13000
To remove both 'pcipassthrough-13000' and 'pcipassthrough-13001', command should be as below.
No output upon success.
$ govc device.pci.remove -vm helloworld pcipassthrough-13000 pcipassthrough-13001
Options:
-vm= Virtual machine [GOVC_VM]
Usage: govc device.remove [OPTIONS] DEVICE...
Remove DEVICE from VM.
Examples:
govc device.remove -vm $name cdrom-3000
govc device.remove -vm $name disk-1000
govc device.remove -vm $name -keep disk-*
Options:
-keep=false Keep files in datastore
-vm= Virtual machine [GOVC_VM]
Usage: govc device.scsi.add [OPTIONS]
Add SCSI controller to VM.
Examples:
govc device.scsi.add -vm $vm
govc device.scsi.add -vm $vm -type pvscsi
govc device.info -vm $vm {lsi,pv}*
Options:
-hot=false Enable hot-add/remove
-sharing=noSharing SCSI sharing
-type=lsilogic SCSI controller type (lsilogic|buslogic|pvscsi|lsilogic-sas)
-vm= Virtual machine [GOVC_VM]
Usage: govc device.serial.add [OPTIONS]
Add serial port to VM.
Examples:
govc device.serial.add -vm $vm
govc device.info -vm $vm serialport-*
Options:
-vm= Virtual machine [GOVC_VM]
Usage: govc device.serial.connect [OPTIONS] URI
Connect service URI to serial port.
If "-" is given as URI, connects file backed device with file name of
device name + .log suffix in the VM Config.Files.LogDirectory.
Defaults to the first serial port if no DEVICE is given.
Examples:
govc device.ls | grep serialport-
govc device.serial.connect -vm $vm -device serialport-8000 telnet://:33233
govc device.info -vm $vm serialport-*
govc device.serial.connect -vm $vm "[datastore1] $vm/console.log"
govc device.serial.connect -vm $vm -
govc datastore.tail -f $vm/serialport-8000.log
Options:
-client=false Use client direction
-device= serial port device name
-vm= Virtual machine [GOVC_VM]
-vspc-proxy= vSPC proxy URI
Usage: govc device.serial.disconnect [OPTIONS]
Disconnect service URI from serial port.
Examples:
govc device.ls | grep serialport-
govc device.serial.disconnect -vm $vm -device serialport-8000
govc device.info -vm $vm serialport-*
Options:
-device= serial port device name
-vm= Virtual machine [GOVC_VM]
Usage: govc device.usb.add [OPTIONS]
Add USB device to VM.
Examples:
govc device.usb.add -vm $vm
govc device.usb.add -type xhci -vm $vm
govc device.info usb*
Options:
-auto=true Enable ability to hot plug devices
-ehci=true Enable enhanced host controller interface (USB 2.0)
-type=usb USB controller type (usb|xhci)
-vm= Virtual machine [GOVC_VM]
Usage: govc disk.create [OPTIONS] NAME
Create disk NAME on DS.
Examples:
govc disk.create -size 24G my-disk
Options:
-datastore-cluster= Datastore cluster [GOVC_DATASTORE_CLUSTER]
-ds= Datastore [GOVC_DATASTORE]
-keep=<nil> Keep disk after VM is deleted
-pool= Resource pool [GOVC_RESOURCE_POOL]
-size=10.0GB Size of new disk
Usage: govc disk.ls [OPTIONS] [ID]...
List disk IDs on DS.
Examples:
govc disk.ls
govc disk.ls -l -T
govc disk.ls -l e9b06a8b-d047-4d3c-b15b-43ea9608b1a6
govc disk.ls -c k8s-region -t us-west-2
Options:
-L=false Print disk backing path instead of disk name
-R=false Reconcile the datastore inventory info
-T=false List attached tags
-c= Query tag category
-ds= Datastore [GOVC_DATASTORE]
-l=false Long listing format
-t= Query tag name
Usage: govc disk.register [OPTIONS] PATH [NAME]
Register existing disk on DS.
Examples:
govc disk.register disks/disk1.vmdk my-disk
Options:
-ds= Datastore [GOVC_DATASTORE]
Usage: govc disk.rm [OPTIONS] ID
Remove disk ID on DS.
Examples:
govc disk.rm ID
Options:
-ds= Datastore [GOVC_DATASTORE]
Usage: govc disk.snapshot.create [OPTIONS] ID DESC
Create snapshot of ID on DS.
Examples:
govc disk.snapshot.create b9fe5f17-3b87-4a03-9739-09a82ddcc6b0 my-disk-snapshot
Options:
-ds= Datastore [GOVC_DATASTORE]
Usage: govc disk.snapshot.ls [OPTIONS] ID
List snapshots for disk ID on DS.
Examples:
govc snapshot.disk.ls -l 9b06a8b-d047-4d3c-b15b-43ea9608b1a6
Options:
-ds= Datastore [GOVC_DATASTORE]
-l=false Long listing format
Usage: govc disk.snapshot.rm [OPTIONS] ID SID
Remove disk ID snapshot ID on DS.
Examples:
govc disk.snapshot.rm ffe6a398-eb8e-4eaa-9118-e1f16b8b8e3c ecbca542-0a25-4127-a585-82e4047750d6
Options:
-ds= Datastore [GOVC_DATASTORE]
Usage: govc disk.tags.attach [OPTIONS] NAME ID
Attach tag NAME to disk ID.
Examples:
govc disk.tags.attach -c k8s-region k8s-region-us $id
Options:
-c= Tag category
Usage: govc disk.tags.detach [OPTIONS] NAME ID
Detach tag NAME from disk ID.
Examples:
govc disk.tags.detach -c k8s-region k8s-region-us $id
Options:
-c= Tag category
Usage: govc dvs.add [OPTIONS] HOST...
Add hosts to DVS.
Examples:
govc dvs.add -dvs dvsName -pnic vmnic1 hostA hostB hostC
Options:
-dvs= DVS path
-host= Host system [GOVC_HOST]
-pnic=vmnic0 Name of the host physical NIC
Usage: govc dvs.change [OPTIONS] DVS
Change DVS (DistributedVirtualSwitch) in datacenter.
Examples:
govc dvs.change -product-version 5.5.0 DSwitch
govc dvs.change -mtu 9000 DSwitch
govc dvs.change -discovery-protocol [lldp|cdp] DSwitch
Options:
-discovery-protocol= Link Discovery Protocol
-mtu=0 DVS Max MTU
-product-version= DVS product version
Usage: govc dvs.create [OPTIONS] DVS
Create DVS (DistributedVirtualSwitch) in datacenter.
The dvs is added to the folder specified by the 'folder' flag. If not given,
this defaults to the network folder in the specified or default datacenter.
Examples:
govc dvs.create DSwitch
govc dvs.create -product-version 5.5.0 DSwitch
govc dvs.create -mtu 9000 DSwitch
govc dvs.create -discovery-protocol [lldp|cdp] DSwitch
Options:
-discovery-protocol= Link Discovery Protocol
-folder= Inventory folder [GOVC_FOLDER]
-mtu=0 DVS Max MTU
-num-uplinks=0 Number of Uplinks
-product-version= DVS product version
Usage: govc dvs.portgroup.add [OPTIONS] NAME
Add portgroup to DVS.
The '-type' options are defined by the dvs.DistributedVirtualPortgroup.PortgroupType API.
The UI labels '-type' as "Port binding" with the following choices:
"Static binding": earlyBinding
"Dynanic binding": lateBinding
"No binding": ephemeral
The '-auto-expand' option is labeled in the UI as "Port allocation".
The default value is false, behaves as the UI labeled "Fixed" choice.
When given '-auto-expand=true', behaves as the UI labeled "Elastic" choice.
Examples:
govc dvs.create DSwitch
govc dvs.portgroup.add -dvs DSwitch -type earlyBinding -nports 16 ExternalNetwork
govc dvs.portgroup.add -dvs DSwitch -type ephemeral InternalNetwork
govc object.destroy network/InternalNetwork # remove the portgroup
Options:
-auto-expand=<nil> Ignore the limit on the number of ports
-dvs= DVS path
-nports=128 Number of ports
-type=earlyBinding Portgroup type (earlyBinding|lateBinding|ephemeral)
-vlan=0 VLAN ID
-vlan-mode=vlan vlan mode (vlan|trunking)
-vlan-range=0-4094 VLAN Ranges with comma delimited
Usage: govc dvs.portgroup.change [OPTIONS] PATH
Change DVS portgroup configuration.
Examples:
govc dvs.portgroup.change -nports 26 ExternalNetwork
govc dvs.portgroup.change -vlan 3214 ExternalNetwork
Options:
-auto-expand=<nil> Ignore the limit on the number of ports
-nports=0 Number of ports
-type=earlyBinding Portgroup type (earlyBinding|lateBinding|ephemeral)
-vlan=0 VLAN ID
-vlan-mode=vlan vlan mode (vlan|trunking)
-vlan-range=0-4094 VLAN Ranges with comma delimited
Usage: govc dvs.portgroup.info [OPTIONS] DVS
Portgroup info for DVS.
Examples:
govc dvs.portgroup.info DSwitch
govc dvs.portgroup.info -pg InternalNetwork DSwitch
govc find / -type DistributedVirtualSwitch | xargs -n1 govc dvs.portgroup.info
Options:
-active=false Filter by port active or inactive status
-connected=false Filter by port connected or disconnected status
-count=0 Number of matches to return (0 = unlimited)
-inside=true Filter by port inside or outside status
-pg= Distributed Virtual Portgroup
-r=false Show DVS rules
-uplinkPort=false Filter for uplink ports
-vlan=0 Filter by VLAN ID (0 = unfiltered)
Usage: govc env [OPTIONS]
Output the environment variables for this client.
If credentials are included in the url, they are split into separate variables.
Useful as bash scripting helper to parse GOVC_URL.
Options:
-x=false Output variables for each GOVC_URL component
Usage: govc events [OPTIONS] [PATH]...
Display events.
Examples:
govc events vm/my-vm1 vm/my-vm2
govc events /dc1/vm/* /dc2/vm/*
govc events -type VmPoweredOffEvent -type VmPoweredOnEvent
govc ls -t HostSystem host/* | xargs govc events | grep -i vsan
Options:
-f=false Follow event stream
-force=false Disable number objects to monitor limit
-l=false Long listing format
-n=25 Output the last N events
-type=[] Include only the specified event types
Usage: govc export.ovf [OPTIONS] DIR
Export VM.
Examples:
govc export.ovf -vm $vm DIR
Options:
-f=false Overwrite existing
-i=false Include image files (*.{iso,img})
-name= Specifies target name (defaults to source name)
-prefix=true Prepend target name to image filenames if missing
-sha=0 Generate manifest using SHA 1, 256, 512 or 0 to skip
-snapshot= Specifies a snapshot to export from (supports running VMs)
-vm= Virtual machine [GOVC_VM]
Usage: govc extension.info [OPTIONS] [KEY]...
Options:
Usage: govc extension.register [OPTIONS]
Options:
-update=false Update extension
Usage: govc extension.setcert [OPTIONS] ID
Set certificate for the extension ID.
The '-cert-pem' option can be one of the following:
'-' : Read the certificate from stdin
'+' : Generate a new key pair and save locally to ID.crt and ID.key
... : Any other value is passed as-is to ExtensionManager.SetCertificate
Examples:
govc extension.setcert -cert-pem + -org Example com.example.extname
Options:
-cert-pem=- PEM encoded certificate
-org=VMware Organization for generated certificate
Usage: govc extension.unregister [OPTIONS]
Options:
Usage: govc fields.add [OPTIONS] NAME
Add a custom field type with NAME.
Examples:
govc fields.add my-field-name # adds a field to all managed object types
govc fields.add -type VirtualMachine my-vm-field-name # adds a field to the VirtualMachine type
Options:
-type= Managed object type
Usage: govc fields.info [OPTIONS] PATH...
Display custom field values for PATH.
Also known as "Custom Attributes".
Examples:
govc fields.info vm/*
govc fields.info -n my-field-name vm/*
Options:
-n= Filter by custom field name
Usage: govc fields.ls [OPTIONS]
List custom field definitions.
Examples:
govc fields.ls
govc fields.ls -type VirtualMachine
Options:
-type= Filter by a Managed Object Type
Usage: govc fields.rename [OPTIONS] KEY NAME
Options:
Usage: govc fields.rm [OPTIONS] KEY...
Options:
Usage: govc fields.set [OPTIONS] KEY VALUE PATH...
Set custom field values for PATH.
Examples:
govc fields.set my-field-name field-value vm/my-vm
govc fields.set -add my-new-global-field-name field-value vm/my-vm
govc fields.set -add -type VirtualMachine my-new-vm-field-name field-value vm/my-vm
Options:
-add=false Adds the field if it does not exist. Use the -type flag to specify the managed object type to which the field is added. Using -add and omitting -kind causes a new, global field to be created if a field with the provided name does not already exist.
-type= Managed object type on which to add the field if it does not exist. This flag is ignored unless -add=true
Usage: govc find [OPTIONS] [ROOT] [KEY VAL]...
Find managed objects.
ROOT can be an inventory path or ManagedObjectReference.
ROOT defaults to '.', an alias for the root folder or DC if set.
Optional KEY VAL pairs can be used to filter results against object instance properties.
Use the govc 'object.collect' command to view possible object property keys.
The '-type' flag value can be a managed entity type or one of the following aliases:
a VirtualApp
c ClusterComputeResource
d Datacenter
f Folder
g DistributedVirtualPortgroup
h HostSystem
m VirtualMachine
n Network
o OpaqueNetwork
p ResourcePool
r ComputeResource
s Datastore
w DistributedVirtualSwitch
Examples:
govc find
govc find -l / # include object type in output
govc find /dc1 -type c
govc find vm -name my-vm-*
govc find . -type n
govc find -p /folder-a/dc-1/host/folder-b/cluster-a -type Datacenter # prints /folder-a/dc-1
govc find . -type m -runtime.powerState poweredOn
govc find . -type m -datastore $(govc find -i datastore -name vsanDatastore)
govc find . -type s -summary.type vsan
govc find . -type s -customValue *:prod # Key:Value
govc find . -type h -hardware.cpuInfo.numCpuCores 16
Options:
-i=false Print the managed object reference
-l=false Long listing format
-maxdepth=-1 Max depth
-name=* Resource name
-p=false Find parent objects
-type=[] Resource type
Usage: govc firewall.ruleset.find [OPTIONS]
Find firewall rulesets matching the given rule.
For a complete list of rulesets: govc host.esxcli network firewall ruleset list
For a complete list of rules: govc host.esxcli network firewall ruleset rule list
Examples:
govc firewall.ruleset.find -direction inbound -port 22
govc firewall.ruleset.find -direction outbound -port 2377
Options:
-c=true Check if esx firewall is enabled
-direction=outbound Direction
-enabled=true Find enabled rule sets if true, disabled if false
-host= Host system [GOVC_HOST]
-port=0 Port
-proto=tcp Protocol
-type=dst Port type
Usage: govc folder.create [OPTIONS] PATH...
Create folder with PATH.
Examples:
govc folder.create /dc1/vm/folder-foo
govc object.mv /dc1/vm/vm-foo-* /dc1/vm/folder-foo
govc folder.create -pod /dc1/datastore/sdrs
govc object.mv /dc1/datastore/iscsi-* /dc1/datastore/sdrs
Options:
-pod=false Create folder(s) of type StoragePod (DatastoreCluster)
Usage: govc folder.info [OPTIONS] [PATH]...
Options:
Usage: govc guest.chmod [OPTIONS] MODE FILE
Change FILE MODE on VM.
Examples:
govc guest.chmod -vm $name 0644 /var/log/foo.log
Options:
-l=: Guest VM credentials (<user>:<password>) [GOVC_GUEST_LOGIN]
-vm= Virtual machine [GOVC_VM]
Usage: govc guest.chown [OPTIONS] UID[:GID] FILE
Change FILE UID and GID on VM.
Examples:
govc guest.chown -vm $name UID[:GID] /var/log/foo.log
Options:
-l=: Guest VM credentials (<user>:<password>) [GOVC_GUEST_LOGIN]
-vm= Virtual machine [GOVC_VM]
Usage: govc guest.df [OPTIONS]
Report file system disk space usage.
Examples:
govc guest.df -vm $name
Options:
-vm= Virtual machine [GOVC_VM]
Usage: govc guest.download [OPTIONS] SOURCE DEST
Copy SOURCE from the guest VM to DEST on the local system.
If DEST name is "-", source is written to stdout.
Examples:
govc guest.download -l user:pass -vm=my-vm /var/log/my.log ./local.log
govc guest.download -l user:pass -vm=my-vm /etc/motd -
tar -cf- foo/ | govc guest.run -d - tar -C /tmp -xf-
govc guest.run tar -C /tmp -cf- foo/ | tar -C /tmp -xf- # download directory
Options:
-f=false If set, the local destination file is clobbered
-l=: Guest VM credentials (<user>:<password>) [GOVC_GUEST_LOGIN]
-vm= Virtual machine [GOVC_VM]
Usage: govc guest.getenv [OPTIONS] [NAME]...
Read NAME environment variables from VM.
Examples:
govc guest.getenv -vm $name
govc guest.getenv -vm $name HOME
Options:
-i=false Interactive session
-l=: Guest VM credentials (<user>:<password>) [GOVC_GUEST_LOGIN]
-vm= Virtual machine [GOVC_VM]
Usage: govc guest.kill [OPTIONS]
Kill process ID on VM.
Examples:
govc guest.kill -vm $name -p 12345
Options:
-i=false Interactive session
-l=: Guest VM credentials (<user>:<password>) [GOVC_GUEST_LOGIN]
-p=[] Process ID
-vm= Virtual machine [GOVC_VM]
Usage: govc guest.ls [OPTIONS] PATH
List PATH files in VM.
Examples:
govc guest.ls -vm $name /tmp
Options:
-l=: Guest VM credentials (<user>:<password>) [GOVC_GUEST_LOGIN]
-s=false Simple path only listing
-vm= Virtual machine [GOVC_VM]
Usage: govc guest.mkdir [OPTIONS] PATH
Create directory PATH in VM.
Examples:
govc guest.mkdir -vm $name /tmp/logs
govc guest.mkdir -vm $name -p /tmp/logs/foo/bar
Options:
-l=: Guest VM credentials (<user>:<password>) [GOVC_GUEST_LOGIN]
-p=false Create intermediate directories as needed
-vm= Virtual machine [GOVC_VM]
Usage: govc guest.mktemp [OPTIONS]
Create a temporary file or directory in VM.
Examples:
govc guest.mktemp -vm $name
govc guest.mktemp -vm $name -d
govc guest.mktemp -vm $name -t myprefix
govc guest.mktemp -vm $name -p /var/tmp/$USER
Options:
-d=false Make a directory instead of a file
-l=: Guest VM credentials (<user>:<password>) [GOVC_GUEST_LOGIN]
-p= If specified, create relative to this directory
-s= Suffix
-t= Prefix
-vm= Virtual machine [GOVC_VM]
Usage: govc guest.mv [OPTIONS] SOURCE DEST
Move (rename) files in VM.
Examples:
govc guest.mv -vm $name /tmp/foo.sh /tmp/bar.sh
govc guest.mv -vm $name -n /tmp/baz.sh /tmp/bar.sh
Options:
-l=: Guest VM credentials (<user>:<password>) [GOVC_GUEST_LOGIN]
-n=false Do not overwrite an existing file
-vm= Virtual machine [GOVC_VM]
Usage: govc guest.ps [OPTIONS]
List processes in VM.
By default, unless the '-e', '-p' or '-U' flag is specified, only processes owned
by the '-l' flag user are displayed.
The '-x' and '-X' flags only apply to processes started by vmware-tools,
such as those started with the govc guest.start command.
Examples:
govc guest.ps -vm $name
govc guest.ps -vm $name -e
govc guest.ps -vm $name -p 12345
govc guest.ps -vm $name -U root
Options:
-U= Select by process UID
-X=false Wait for process to exit
-e=false Select all processes
-i=false Interactive session
-l=: Guest VM credentials (<user>:<password>) [GOVC_GUEST_LOGIN]
-p=[] Select by process ID
-vm= Virtual machine [GOVC_VM]
-x=false Output exit time and code
Usage: govc guest.rm [OPTIONS] PATH
Remove file PATH in VM.
Examples:
govc guest.rm -vm $name /tmp/foo.log
Options:
-l=: Guest VM credentials (<user>:<password>) [GOVC_GUEST_LOGIN]
-vm= Virtual machine [GOVC_VM]
Usage: govc guest.rmdir [OPTIONS] PATH
Remove directory PATH in VM.
Examples:
govc guest.rmdir -vm $name /tmp/empty-dir
govc guest.rmdir -vm $name -r /tmp/non-empty-dir
Options:
-l=: Guest VM credentials (<user>:<password>) [GOVC_GUEST_LOGIN]
-r=false Recursive removal
-vm= Virtual machine [GOVC_VM]
Usage: govc guest.run [OPTIONS] PATH [ARG]...
Run program PATH in VM and display output.
The guest.run command starts a program in the VM with i/o redirected, waits for the process to exit and
propagates the exit code to the govc process exit code. Note that stdout and stderr are redirected by default,
stdin is only redirected when the '-d' flag is specified.
Note that vmware-tools requires program PATH to be absolute.
If PATH is not absolute and vm guest family is Windows,
guest.run changes the command to: 'c:\\Windows\\System32\\cmd.exe /c "PATH [ARG]..."'
Otherwise the command is changed to: '/bin/bash -c "PATH [ARG]..."'
Examples:
govc guest.run -vm $name ifconfig
govc guest.run -vm $name ifconfig eth0
cal | govc guest.run -vm $name -d - cat
govc guest.run -vm $name -d "hello $USER" cat
govc guest.run -vm $name curl -s :invalid: || echo $? # exit code 6
govc guest.run -vm $name -e FOO=bar -e BIZ=baz -C /tmp env
govc guest.run -vm $name -l root:mypassword ntpdate -u pool.ntp.org
govc guest.run -vm $name powershell C:\\network_refresh.ps1
Options:
-C= The absolute path of the working directory for the program to start
-d= Input data string. A value of '-' reads from OS stdin
-e=[] Set environment variables
-i=false Interactive session
-l=: Guest VM credentials (<user>:<password>) [GOVC_GUEST_LOGIN]
-vm= Virtual machine [GOVC_VM]
Usage: govc guest.start [OPTIONS] PATH [ARG]...
Start program in VM.
The process can have its status queried with govc guest.ps.
When the process completes, its exit code and end time will be available for 5 minutes after completion.
Examples:
govc guest.start -vm $name /bin/mount /dev/hdb1 /data
pid=$(govc guest.start -vm $name /bin/long-running-thing)
govc guest.ps -vm $name -p $pid -X
Options:
-C= The absolute path of the working directory for the program to start
-e=[] Set environment variable (key=val)
-i=false Interactive session
-l=: Guest VM credentials (<user>:<password>) [GOVC_GUEST_LOGIN]
-vm= Virtual machine [GOVC_VM]
Usage: govc guest.touch [OPTIONS] FILE
Change FILE times on VM.
Examples:
govc guest.touch -vm $name /var/log/foo.log
govc guest.touch -vm $name -d "$(date -d '1 day ago')" /var/log/foo.log
Options:
-a=false Change only the access time
-c=false Do not create any files
-d= Use DATE instead of current time
-l=: Guest VM credentials (<user>:<password>) [GOVC_GUEST_LOGIN]
-vm= Virtual machine [GOVC_VM]
Usage: govc guest.upload [OPTIONS] SOURCE DEST
Copy SOURCE from the local system to DEST in the guest VM.
If SOURCE name is "-", read source from stdin.
Examples:
govc guest.upload -l user:pass -vm=my-vm ~/.ssh/id_rsa.pub /home/$USER/.ssh/authorized_keys
cowsay "have a great day" | govc guest.upload -l user:pass -vm=my-vm - /etc/motd
tar -cf- foo/ | govc guest.run -d - tar -C /tmp -xf- # upload a directory
Options:
-f=false If set, the guest destination file is clobbered
-gid=<nil> Group ID
-l=: Guest VM credentials (<user>:<password>) [GOVC_GUEST_LOGIN]
-perm=0 File permissions
-uid=<nil> User ID
-vm= Virtual machine [GOVC_VM]
Usage: govc host.account.create [OPTIONS]
Create local account on HOST.
Examples:
govc host.account.create -id $USER -password password-for-esx60
Options:
-description= The description of the specified account
-host= Host system [GOVC_HOST]
-id= The ID of the specified account
-password= The password for the specified account id
Usage: govc host.account.remove [OPTIONS]
Remove local account on HOST.
Examples:
govc host.account.remove -id $USER
Options:
-description= The description of the specified account
-host= Host system [GOVC_HOST]
-id= The ID of the specified account
-password= The password for the specified account id
Usage: govc host.account.update [OPTIONS]
Update local account on HOST.
Examples:
govc host.account.update -id root -password password-for-esx60
Options:
-description= The description of the specified account
-host= Host system [GOVC_HOST]
-id= The ID of the specified account
-password= The password for the specified account id
Usage: govc host.add [OPTIONS]
Add host to datacenter.
The host is added to the folder specified by the 'folder' flag. If not given,
this defaults to the host folder in the specified or default datacenter.
Examples:
thumbprint=$(govc about.cert -k -u host.example.com -thumbprint | awk '{print $2}')
govc host.add -hostname host.example.com -username root -password pass -thumbprint $thumbprint
govc host.add -hostname 10.0.6.1 -username root -password pass -noverify
Options:
-connect=true Immediately connect to host
-folder= Inventory folder [GOVC_FOLDER]
-force=false Force when host is managed by another VC
-hostname= Hostname or IP address of the host
-noverify=false Accept host thumbprint without verification
-password= Password of administration account on the host
-thumbprint= SHA-1 thumbprint of the host's SSL certificate
-username= Username of administration account on the host
Usage: govc host.autostart.add [OPTIONS] VM...
Options:
-host= Host system [GOVC_HOST]
-start-action=powerOn Start Action
-start-delay=-1 Start Delay
-start-order=-1 Start Order
-stop-action=systemDefault Stop Action
-stop-delay=-1 Stop Delay
-wait=systemDefault Wait for Hearbeat Setting (systemDefault|yes|no)
Usage: govc host.autostart.configure [OPTIONS]
Options:
-enabled=<nil> Enable autostart
-host= Host system [GOVC_HOST]
-start-delay=0 Start delay
-stop-action= Stop action
-stop-delay=0 Stop delay
-wait-for-heartbeat=<nil> Wait for hearbeat
Usage: govc host.autostart.info [OPTIONS]
Options:
-host= Host system [GOVC_HOST]
Usage: govc host.autostart.remove [OPTIONS] VM...
Options:
-host= Host system [GOVC_HOST]
Usage: govc host.cert.csr [OPTIONS]
Generate a certificate-signing request (CSR) for HOST.
Options:
-host= Host system [GOVC_HOST]
-ip=false Use IP address as CN
Usage: govc host.cert.import [OPTIONS] FILE
Install SSL certificate FILE on HOST.
If FILE name is "-", read certificate from stdin.
Options:
-host= Host system [GOVC_HOST]
Usage: govc host.cert.info [OPTIONS]
Display SSL certificate info for HOST.
Options:
-host= Host system [GOVC_HOST]
Usage: govc host.date.change [OPTIONS]
Change date and time for HOST.
Examples:
govc host.date.change -date "$(date -u)"
govc host.date.change -server time.vmware.com
govc host.service enable ntpd
govc host.service start ntpd
Options:
-date= Update the date/time on the host
-host= Host system [GOVC_HOST]
-server= IP or FQDN for NTP server(s)
-tz= Change timezone of the host
Usage: govc host.date.info [OPTIONS]
Display date and time info for HOST.
Options:
-host= Host system [GOVC_HOST]
Usage: govc host.disconnect [OPTIONS]
Disconnect HOST from vCenter.
Options:
-host= Host system [GOVC_HOST]
Usage: govc host.esxcli [OPTIONS] COMMAND [ARG]...
Invoke esxcli command on HOST.
Output is rendered in table form when possible, unless disabled with '-hints=false'.
Examples:
govc host.esxcli network ip connection list
govc host.esxcli system settings advanced set -o /Net/GuestIPHack -i 1
govc host.esxcli network firewall ruleset set -r remoteSerialPort -e true
govc host.esxcli network firewall set -e false
govc host.esxcli hardware platform get
Options:
-hints=true Use command info hints when formatting output
-host= Host system [GOVC_HOST]
Usage: govc host.info [OPTIONS]
Options:
-host= Host system [GOVC_HOST]
Usage: govc host.maintenance.enter [OPTIONS] HOST...
Put HOST in maintenance mode.
While this task is running and when the host is in maintenance mode,
no VMs can be powered on and no provisioning operations can be performed on the host.
Options:
-evacuate=false Evacuate powered off VMs
-host= Host system [GOVC_HOST]
-timeout=0 Timeout
Usage: govc host.maintenance.exit [OPTIONS] HOST...
Take HOST out of maintenance mode.
This blocks if any concurrent running maintenance-only host configurations operations are being performed.
For example, if VMFS volumes are being upgraded.
The 'timeout' flag is the number of seconds to wait for the exit maintenance mode to succeed.
If the timeout is less than or equal to zero, there is no timeout.
Options:
-host= Host system [GOVC_HOST]
-timeout=0 Timeout
Usage: govc host.option.ls [OPTIONS] [NAME]
List option with the given NAME.
If NAME ends with a dot, all options for that subtree are listed.
Examples:
govc host.option.ls
govc host.option.ls Config.HostAgent.
govc host.option.ls Config.HostAgent.plugins.solo.enableMob
Options:
-host= Host system [GOVC_HOST]
Usage: govc host.option.set [OPTIONS] NAME VALUE
Set option NAME to VALUE.
Examples:
govc host.option.set Config.HostAgent.plugins.solo.enableMob true
govc host.option.set Config.HostAgent.log.level verbose
Options:
-host= Host system [GOVC_HOST]
Usage: govc host.portgroup.add [OPTIONS] NAME
Add portgroup to HOST.
Examples:
govc host.portgroup.add -vswitch vSwitch0 -vlan 3201 bridge
Options:
-host= Host system [GOVC_HOST]
-vlan=0 VLAN ID
-vswitch= vSwitch Name
Usage: govc host.portgroup.change [OPTIONS] NAME
Change configuration of HOST portgroup NAME.
Examples:
govc host.portgroup.change -allow-promiscuous -forged-transmits -mac-changes "VM Network"
govc host.portgroup.change -vswitch-name vSwitch1 "Management Network"
Options:
-allow-promiscuous=<nil> Allow promiscuous mode
-forged-transmits=<nil> Allow forged transmits
-host= Host system [GOVC_HOST]
-mac-changes=<nil> Allow MAC changes
-name= Portgroup name
-vlan-id=-1 VLAN ID
-vswitch-name= vSwitch name
Usage: govc host.portgroup.info [OPTIONS]
Options:
-host= Host system [GOVC_HOST]
Usage: govc host.portgroup.remove [OPTIONS] NAME
Remove portgroup from HOST.
Examples:
govc host.portgroup.remove bridge
Options:
-host= Host system [GOVC_HOST]
Usage: govc host.reconnect [OPTIONS]
Reconnect HOST to vCenter.
This command can also be used to change connection properties (hostname, fingerprint, username, password),
without disconnecting the host.
Options:
-force=false Force when host is managed by another VC
-host= Host system [GOVC_HOST]
-hostname= Hostname or IP address of the host
-noverify=false Accept host thumbprint without verification
-password= Password of administration account on the host
-sync-state=false Sync state
-thumbprint= SHA-1 thumbprint of the host's SSL certificate
-username= Username of administration account on the host
Usage: govc host.remove [OPTIONS] HOST...
Remove HOST from vCenter.
Options:
-host= Host system [GOVC_HOST]
Usage: govc host.service [OPTIONS] ACTION ID
Apply host service ACTION to service ID.
Where ACTION is one of: start, stop, restart, status, enable, disable
Examples:
govc host.service enable TSM-SSH
govc host.service start TSM-SSH
Options:
-host= Host system [GOVC_HOST]
Usage: govc host.service.ls [OPTIONS]
List HOST services.
Options:
-host= Host system [GOVC_HOST]
Usage: govc host.shutdown [OPTIONS] HOST...
Shutdown HOST.
Options:
-f=false Force shutdown when host is not in maintenance mode
-host= Host system [GOVC_HOST]
-r=false Reboot host
Usage: govc host.storage.info [OPTIONS]
Show HOST storage system information.
Examples:
govc find / -type h | xargs -n1 govc host.storage.info -unclaimed -host
Options:
-host= Host system [GOVC_HOST]
-refresh=false Refresh the storage system provider
-rescan=false Rescan all host bus adapters
-rescan-vmfs=false Rescan for new VMFSs
-t=lun Type (hba,lun)
-unclaimed=false Only show disks that can be used as new VMFS datastores
Usage: govc host.storage.mark [OPTIONS] DEVICE_PATH
Mark device at DEVICE_PATH.
Options:
-host= Host system [GOVC_HOST]
-local=<nil> Mark as local
-ssd=<nil> Mark as SSD
Usage: govc host.storage.partition [OPTIONS] DEVICE_PATH
Show partition table for device at DEVICE_PATH.
Options:
-host= Host system [GOVC_HOST]
Usage: govc host.vnic.change [OPTIONS] DEVICE
Change a virtual nic DEVICE.
Examples:
govc host.vnic.change -host hostname -mtu 9000 vmk1
Options:
-host= Host system [GOVC_HOST]
-mtu=0 vmk MTU
Usage: govc host.vnic.hint [OPTIONS] [DEVICE]...
Query virtual nic DEVICE hints.
Examples:
govc host.vnic.hint -host hostname
govc host.vnic.hint -host hostname vmnic1
Options:
-host= Host system [GOVC_HOST]
Usage: govc host.vnic.info [OPTIONS]
Options:
-host= Host system [GOVC_HOST]
Usage: govc host.vnic.service [OPTIONS] SERVICE DEVICE
Enable or disable service on a virtual nic device.
Where SERVICE is one of: vmotion|faultToleranceLogging|vSphereReplication|vSphereReplicationNFC|management|vsan|vSphereProvisioning
Where DEVICE is one of: vmk0|vmk1|...
Examples:
govc host.vnic.service -host hostname -enable vsan vmk0
govc host.vnic.service -host hostname -enable=false vmotion vmk1
Options:
-enable=true Enable service
-host= Host system [GOVC_HOST]
Usage: govc host.vswitch.add [OPTIONS] NAME
Options:
-host= Host system [GOVC_HOST]
-mtu=0 MTU
-nic= Bridge nic device
-ports=128 Number of ports
Usage: govc host.vswitch.info [OPTIONS]
Options:
-host= Host system [GOVC_HOST]
Usage: govc host.vswitch.remove [OPTIONS] NAME
Options:
-host= Host system [GOVC_HOST]
Usage: govc import.ova [OPTIONS] PATH_TO_OVA
Options:
-ds= Datastore [GOVC_DATASTORE]
-folder= Inventory folder [GOVC_FOLDER]
-host= Host system [GOVC_HOST]
-m=false Verify checksum of uploaded files against manifest (.mf)
-name= Name to use for new entity
-options= Options spec file path for VM deployment
-pool= Resource pool [GOVC_RESOURCE_POOL]
Usage: govc import.ovf [OPTIONS] PATH_TO_OVF
Options:
-ds= Datastore [GOVC_DATASTORE]
-folder= Inventory folder [GOVC_FOLDER]
-host= Host system [GOVC_HOST]
-m=false Verify checksum of uploaded files against manifest (.mf)
-name= Name to use for new entity
-options= Options spec file path for VM deployment
-pool= Resource pool [GOVC_RESOURCE_POOL]
Usage: govc import.spec [OPTIONS] PATH_TO_OVF_OR_OVA
Options:
Usage: govc import.vmdk [OPTIONS] PATH_TO_VMDK [REMOTE_DIRECTORY]
Options:
-ds= Datastore [GOVC_DATASTORE]
-folder= Inventory folder [GOVC_FOLDER]
-force=false Overwrite existing disk
-pool= Resource pool [GOVC_RESOURCE_POOL]
Usage: govc library.checkin [OPTIONS] PATH
Check in VM to Content Library item PATH.
Note: this command requires vCenter 7.0 or higher.
Examples:
govc library.checkin -vm my-vm my-content/template-vm-item
Options:
-m= Check in message
-vm= Virtual machine [GOVC_VM]
Usage: govc library.checkout [OPTIONS] PATH NAME
Check out Content Library item PATH to vm NAME.
Note: this command requires vCenter 7.0 or higher.
Examples:
govc library.checkout -cluster my-cluster my-content/template-vm-item my-vm
Options:
-cluster= Cluster [GOVC_CLUSTER]
-folder= Inventory folder [GOVC_FOLDER]
-host= Host system [GOVC_HOST]
-pool= Resource pool [GOVC_RESOURCE_POOL]
Usage: govc library.clone [OPTIONS] PATH NAME
Clone VM to Content Library PATH.
By default, clone as a VM template (requires vCenter version 6.7U1 or higher).
Clone as an OVF when the '-ovf' flag is specified.
Examples:
govc library.clone -vm template-vm my-content template-vm-item
govc library.clone -ovf -vm template-vm my-content ovf-item
Options:
-cluster= Cluster [GOVC_CLUSTER]
-ds= Datastore [GOVC_DATASTORE]
-e=false Include extra configuration
-folder= Inventory folder [GOVC_FOLDER]
-host= Host system [GOVC_HOST]
-m=false Preserve MAC-addresses on network adapters
-ovf=false Clone as OVF (default is VM Template)
-pool= Resource pool [GOVC_RESOURCE_POOL]
-profile= Storage profile
-vm= Virtual machine [GOVC_VM]
Usage: govc library.cp [OPTIONS] SRC DST
Copy SRC library item to DST library.
Examples:
govc library.cp /my-content/my-item /my-other-content
govc library.cp -n my-item2 /my-content/my-item /my-other-content
Options:
-n= Library item name
Usage: govc library.create [OPTIONS] NAME
Create library.
Examples:
govc library.create library_name
govc library.create -sub http://server/path/lib.json library_name
govc library.create -pub library_name
Options:
-d=<nil> Description of library
-ds= Datastore [GOVC_DATASTORE]
-policy= Security Policy ID
-pub=<nil> Publish library
-pub-password= Publication password
-pub-username= Publication username
-sub= Subscribe to library URL
-sub-autosync=true Automatic synchronization
-sub-ondemand=false Download content on demand
-sub-password= Subscription password
-sub-username= Subscription username
-thumbprint= SHA-1 thumbprint of the host's SSL certificate
Usage: govc library.deploy [OPTIONS] TEMPLATE [NAME]
Deploy library OVF template.
Examples:
govc library.deploy /library_name/ovf_template vm_name
govc library.export /library_name/ovf_template/*.ovf # save local copy of .ovf
govc import.spec *.ovf > deploy.json # generate options from .ovf
# edit deploy.json as needed
govc library.deploy -options deploy.json /library_name/ovf_template
Options:
-ds= Datastore [GOVC_DATASTORE]
-folder= Inventory folder [GOVC_FOLDER]
-host= Host system [GOVC_HOST]
-options= Options spec file path for VM deployment
-pool= Resource pool [GOVC_RESOURCE_POOL]
-profile= Storage profile
Usage: govc library.export [OPTIONS] PATH [DEST]
Export library items.
If the given PATH is a library item, all files will be downloaded.
If the given PATH is a library item file, only that file will be downloaded.
By default, files are saved using the library item's file names to the current directory.
If DEST is given for a library item, files are saved there instead of the current directory.
If DEST is given for a library item file, the file will be saved with that name.
If DEST is '-', the file contents are written to stdout instead of saving to a file.
Examples:
govc library.export library_name/item_name
govc library.export library_name/item_name/file_name
govc library.export library_name/item_name/*.ovf -
Options:
Usage: govc library.import [OPTIONS] LIBRARY ITEM
Import library items.
Examples:
govc library.import library_name file.ova
govc library.import library_name file.ovf
govc library.import library_name file.iso
govc library.import library_id file.iso # Use library id if multiple libraries have the same name
govc library.import library_name/item_name file.ova # update existing item
govc library.import library_name http://example.com/file.ovf # download and push to vCenter
govc library.import -pull library_name http://example.com/file.ova # direct pull from vCenter
Options:
-m=false Require ova manifest
-n= Library item name
-pull=false Pull library item from http endpoint
-t= Library item type
Usage: govc library.info [OPTIONS]
Display library information.
Examples:
govc library.info
govc library.info /lib1
govc library.info -l /lib1 | grep Size:
govc library.info /lib1/item1
govc library.info /lib1/item1/
govc library.info */
govc device.cdrom.insert -vm $vm -device cdrom-3000 $(govc library.info -L /lib1/item1/file1)
govc library.info -json | jq .
govc library.info -json /lib1/item1 | jq .
Options:
-L=false List Datastore path only
-U=false List pub/sub URL(s) only
-l=false Long listing format
Usage: govc library.ls [OPTIONS]
List libraries, items, and files.
Examples:
govc library.ls
govc library.ls /lib1
govc library.ls /lib1/item1
govc library.ls /lib1/item1/
govc library.ls */
govc library.ls -json | jq .
govc library.ls /lib1/item1 -json | jq .
Options:
Usage: govc library.policy.ls [OPTIONS]
List security policies for content libraries.
Examples:
govc library.policy.ls
Options:
Usage: govc library.publish [OPTIONS] NAME|ITEM [SUBSCRIPTION-ID]...
Publish library NAME or ITEM to subscribers.
If no subscriptions are specified, then publishes the library to all its subscribers.
See 'govc library.subscriber.ls' to get a list of subscription IDs.
Examples:
govc library.publish /my-library
govc library.publish /my-library subscription-id1 subscription-id2
govc library.publish /my-library/my-item
govc library.publish /my-library/my-item subscription-id1 subscription-id2
Options:
Usage: govc library.rm [OPTIONS] NAME
Delete library or item NAME.
Examples:
govc library.rm /library_name
govc library.rm library_id # Use library id if multiple libraries have the same name
govc library.rm /library_name/item_name
Options:
Usage: govc library.session.ls [OPTIONS]
List library item update sessions.
Examples:
govc library.session.ls
govc library.session.ls -json | jq .
Options:
Usage: govc library.session.rm [OPTIONS]
Remove a library item update session.
Examples:
govc library.session.rm session_id
Options:
-f=false Cancel session if active
Usage: govc library.subscriber.create [OPTIONS] PUBLISHED-LIBRARY SUBSCRIPTION-LIBRARY
Create library subscriber.
Examples:
govc library.subscriber.create -cluster my-cluster published-library subscription-library
Options:
-cluster= Cluster [GOVC_CLUSTER]
-folder= Inventory folder [GOVC_FOLDER]
-host= Host system [GOVC_HOST]
-net= Network [GOVC_NETWORK]
-net.adapter=e1000 Network adapter type
-net.address= Network hardware address
-pool= Resource pool [GOVC_RESOURCE_POOL]
Usage: govc library.subscriber.info [OPTIONS] PUBLISHED-LIBRARY SUBSCRIPTION-ID
Library subscriber info.
Examples:
id=$(govc library.subscriber.ls | grep my-library-name | awk '{print $1}')
govc library.subscriber.info published-library-name $id
Options:
Usage: govc library.subscriber.ls [OPTIONS]
List library subscriptions.
Examples:
govc library.subscriber.ls library-name
Options:
Usage: govc library.subscriber.rm [OPTIONS] SUBSCRIPTION-ID
Delete subscription of the published library.
The subscribed library associated with the subscription will not be deleted.
Examples:
id=$(govc library-subscriber.ls | grep my-library-name | awk '{print $1}')
govc library.subscriber.rm $id
Options:
Usage: govc library.sync [OPTIONS] NAME|ITEM
Sync library NAME or ITEM.
Examples:
govc library.sync subscribed-library
govc library.sync subscribed-library/item
govc library.sync -vmtx local-library subscribed-library # convert subscribed OVFs to local VMTX
Options:
-folder= Inventory folder [GOVC_FOLDER]
-pool= Resource pool [GOVC_RESOURCE_POOL]
-vmtx= Sync subscribed library to local library as VM Templates
Usage: govc library.trust.create [OPTIONS] FILE
Add a certificate to content library trust store.
If FILE name is "-", read certificate from stdin.
Examples:
govc library.trust.create cert.pem
govc about.cert -show -u wp-content-int.vmware.com | govc library.trust.create -
Options:
Usage: govc library.trust.info [OPTIONS] ID
Display trusted certificate info.
Examples:
govc library.trust.info vmware_signed
Options:
Usage: govc library.trust.ls [OPTIONS]
List trusted certificates for content libraries.
Examples:
govc library.trust.ls
govc library.trust.ls -json
Options:
Usage: govc library.trust.rm [OPTIONS] ID
Remove certificate ID from trusted certificates.
Examples:
govc library.trust.rm $id
Options:
Usage: govc library.update [OPTIONS] PATH
Update library or item PATH.
Examples:
govc library.update -d "new library description" -n "new-name" my-library
govc library.update -d "new item description" -n "new-item-name" my-library/my-item
Options:
-d=<nil> Library or item description
-n= Library or item name
Usage: govc library.vmtx.info [OPTIONS]
Display VMTX template details
Examples:
govc library.vmtx.info /library_name/vmtx_template_name
Options:
Usage: govc license.add [OPTIONS] KEY...
Options:
Usage: govc license.assign [OPTIONS] KEY
Assign licenses to HOST or CLUSTER.
Examples:
govc license.assign $VCSA_LICENSE_KEY
govc license.assign -host a_host.example.com $ESX_LICENSE_KEY
govc license.assign -cluster a_cluster $VSAN_LICENSE_KEY
Options:
-cluster= Cluster [GOVC_CLUSTER]
-host= Host system [GOVC_HOST]
-name= Display name
-remove=false Remove assignment
Usage: govc license.assigned.ls [OPTIONS]
Options:
-id= Entity ID
Usage: govc license.decode [OPTIONS] KEY...
Options:
-feature= List licenses with given feature
Usage: govc license.label.set [OPTIONS] LICENSE KEY VAL
Set license labels.
Examples:
govc license.label.set 00000-00000-00000-00000-00000 team cnx # add/set label
govc license.label.set 00000-00000-00000-00000-00000 team "" # remove label
govc license.ls -json | jq '.[] | select(.Labels[].Key == "team") | .LicenseKey'
Options:
Usage: govc license.ls [OPTIONS]
Options:
-feature= List licenses with given feature
Usage: govc license.remove [OPTIONS] KEY...
Options:
Usage: govc logs [OPTIONS]
View VPX and ESX logs.
The '-log' option defaults to "hostd" when connected directly to a host or
when connected to VirtualCenter and a '-host' option is given. Otherwise,
the '-log' option defaults to "vpxd:vpxd.log". The '-host' option is ignored
when connected directly to a host. See 'govc logs.ls' for other '-log' options.
Examples:
govc logs -n 1000 -f
govc logs -host esx1
govc logs -host esx1 -log vmkernel
Options:
-f=false Follow log file changes
-host= Host system [GOVC_HOST]
-log= Log file key
-n=25 Output the last N log lines
Usage: govc logs.download [OPTIONS] [PATH]...
Generate diagnostic bundles.
A diagnostic bundle includes log files and other configuration information.
Use PATH to include a specific set of hosts to include.
Examples:
govc logs.download
govc logs.download host-a host-b
Options:
-default=false Specifies if the bundle should include the default server
Usage: govc logs.ls [OPTIONS]
List diagnostic log keys.
Examples:
govc logs.ls
govc logs.ls -host host-a
Options:
-host= Host system [GOVC_HOST]
Usage: govc ls [OPTIONS] [PATH]...
List inventory items.
Examples:
govc ls -l '*'
govc ls -t ClusterComputeResource host
govc ls -t Datastore host/ClusterA/* | grep -v local | xargs -n1 basename | sort | uniq
Options:
-L=false Follow managed object references
-i=false Print the managed object reference
-l=false Long listing format
-t= Object type
Usage: govc metric.change [OPTIONS] NAME...
Change counter NAME levels.
Examples:
govc metric.change -level 1 net.bytesRx.average net.bytesTx.average
Options:
-device-level=0 Level for the per device counter
-i=real Interval ID (real|day|week|month|year)
-level=0 Level for the aggregate counter
Usage: govc metric.info [OPTIONS] PATH [NAME]...
Metric info for NAME.
If PATH is a value other than '-', provider summary and instance list are included
for the given object type.
If NAME is not specified, all available metrics for the given INTERVAL are listed.
An object PATH must be provided in this case.
Examples:
govc metric.info vm/my-vm
govc metric.info -i 300 vm/my-vm
govc metric.info - cpu.usage.average
govc metric.info /dc1/host/cluster cpu.usage.average
Options:
-g= Show info for a specific Group
-i=real Interval ID (real|day|week|month|year)
Usage: govc metric.interval.change [OPTIONS]
Change historical metric intervals.
Examples:
govc metric.interval.change -i 300 -level 2
govc metric.interval.change -i 86400 -enabled=false
Options:
-enabled=<nil> Enable or disable
-i=real Interval ID (real|day|week|month|year)
-level=0 Level
Usage: govc metric.interval.info [OPTIONS]
List historical metric intervals.
Examples:
govc metric.interval.info
govc metric.interval.info -i 300
Options:
-i=real Interval ID (real|day|week|month|year)
Usage: govc metric.ls [OPTIONS] PATH
List available metrics for PATH.
The default output format is the metric name.
The '-l' flag includes the metric description.
The '-L' flag includes the metric units, instance count (if any) and description.
The instance count is prefixed with a single '@'.
If no aggregate is provided for the metric, instance count is prefixed with two '@@'.
Examples:
govc metric.ls /dc1/host/cluster1
govc metric.ls datastore/*
govc metric.ls -L -g CPU /dc1/host/cluster1/host1
govc metric.ls vm/* | grep mem. | xargs govc metric.sample vm/*
Options:
-L=false Longer listing format
-g= List a specific Group
-i=real Interval ID (real|day|week|month|year)
-l=false Long listing format
Usage: govc metric.reset [OPTIONS] NAME...
Reset counter NAME to the default level of data collection.
Examples:
govc metric.reset net.bytesRx.average net.bytesTx.average
Options:
-i=real Interval ID (real|day|week|month|year)
Usage: govc metric.sample [OPTIONS] PATH... NAME...
Sample for object PATH of metric NAME.
Interval ID defaults to 20 (realtime) if supported, otherwise 300 (5m interval).
By default, INSTANCE '*' samples all instances and the aggregate counter.
An INSTANCE value of '-' will only sample the aggregate counter.
An INSTANCE value other than '*' or '-' will only sample the given instance counter.
If PLOT value is set to '-', output a gnuplot script. If non-empty with another
value, PLOT will pipe the script to gnuplot for you. The value is also used to set
the gnuplot 'terminal' variable, unless the value is that of the DISPLAY env var.
Only 1 metric NAME can be specified when the PLOT flag is set.
Examples:
govc metric.sample host/cluster1/* cpu.usage.average
govc metric.sample -plot .png host/cluster1/* cpu.usage.average | xargs open
govc metric.sample vm/* net.bytesTx.average net.bytesTx.average
govc metric.sample -instance vmnic0 vm/* net.bytesTx.average
govc metric.sample -instance - vm/* net.bytesTx.average
Options:
-d=30 Limit object display name to D chars
-i=real Interval ID (real|day|week|month|year)
-instance=* Instance
-n=5 Max number of samples
-plot= Plot data using gnuplot
-t=false Include sample times
Usage: govc namespace.cluster.disable [OPTIONS]
Disables vSphere Namespaces on the specified cluster.
Examples:
govc namespace.cluster.disable -cluster "Workload-Cluster"
Options:
-cluster= Cluster [GOVC_CLUSTER]
Usage: govc namespace.cluster.enable [OPTIONS]
Enable vSphere Namespaces on the cluster.
This operation sets up Kubernetes instance for the cluster along with worker nodes.
Examples:
govc namespace.cluster.enable \
-cluster "Workload-Cluster" \
-service-cidr 10.96.0.0/23 \
-pod-cidrs 10.244.0.0/20 \
-control-plane-dns 10.10.10.10 \
-control-plane-dns-names wcp.example.com \
-workload-network.egress-cidrs 10.0.0.128/26 \
-workload-network.ingress-cidrs "10.0.0.64/26" \
-workload-network.switch VDS \
-workload-network.edge-cluster Edge-Cluster-1 \
-size TINY \
-mgmt-network.network "DVPG-Management Network" \
-mgmt-network.gateway 10.0.0.1 \
-mgmt-network.starting-address 10.0.0.45 \
-mgmt-network.subnet-mask 255.255.255.0 \
-ephemeral-storage-policy "vSAN Default Storage Policy" \
-control-plane-storage-policy "vSAN Default Storage Policy" \
-image-storage-policy "vSAN Default Storage Policy"
Options:
-cluster= Cluster [GOVC_CLUSTER]
-control-plane-dns= Comma-separated list of DNS server IP addresses to use on Kubernetes API server, specified in order of preference.
-control-plane-dns-names= Comma-separated list of DNS names to associate with the Kubernetes API server. These DNS names are embedded in the TLS certificate presented by the API server.
-control-plane-dns-search-domains= Comma-separated list of domains to be searched when trying to lookup a host name on Kubernetes API server, specified in order of preference.
-control-plane-ntp-servers= Optional. Comma-separated list of NTP server DNS names or IP addresses to use on Kubernetes API server, specified in order of preference. If unset, VMware Tools based time synchronization is enabled.
-control-plane-storage-policy= Storage Policy associated with Kubernetes API server.
-ephemeral-storage-policy= Storage Policy associated with ephemeral disks of all the Kubernetes Pods in the cluster.
-image-storage-policy= Storage Policy to be used for container images.
-login-banner= Optional. Disclaimer to be displayed prior to login via the Kubectl plugin.
-mgmt-network.address-count=5 The number of IP addresses in the management range. Optional, but required with network mode STATICRANGE.
-mgmt-network.floating-IP= Optional. The Floating IP used by the HA master cluster in the when network Mode is DHCP.
-mgmt-network.gateway= Gateway to be used for the management IP range
-mgmt-network.mode=STATICRANGE IPv4 address assignment modes. Value is one of: DHCP, STATICRANGE
-mgmt-network.network= Identifier for the management network.
-mgmt-network.starting-address= Denotes the start of the IP range to be used. Optional, but required with network mode STATICRANGE.
-mgmt-network.subnet-mask= Subnet mask of the management network. Optional, but required with network mode STATICRANGE.
-network-provider=NSXT_CONTAINER_PLUGIN Optional. Provider of cluster networking for this vSphere Namespaces cluster. Currently only value supported is: NSXT_CONTAINER_PLUGIN.
-pod-cidrs= CIDR blocks from which Kubernetes allocates pod IP addresses. Comma-separated list. Shouldn't overlap with service, ingress or egress CIDRs.
-service-cidr= CIDR block from which Kubernetes allocates service cluster IP addresses. Shouldn't overlap with pod, ingress or egress CIDRs
-size= The size of the Kubernetes API server and the worker nodes. Value is one of: TINY, SMALL, MEDIUM, LARGE.
-worker-dns= Comma-separated list of DNS server IP addresses to use on the worker nodes, specified in order of preference.
-workload-network.edge-cluster= NSX Edge Cluster to be used for Kubernetes Services of type LoadBalancer, Kubernetes Ingresses, and NSX SNAT.
-workload-network.egress-cidrs= CIDR blocks from which NSX assigns IP addresses used for performing SNAT from container IPs to external IPs. Comma-separated list. Shouldn't overlap with pod, service or ingress CIDRs.
-workload-network.ingress-cidrs= CIDR blocks from which NSX assigns IP addresses for Kubernetes Ingresses and Kubernetes Services of type LoadBalancer. Comma-separated list. Shouldn't overlap with pod, service or egress CIDRs.
-workload-network.switch= vSphere Distributed Switch used to connect this cluster.
Usage: govc namespace.cluster.ls [OPTIONS]
List namepace enabled clusters.
Examples:
govc namespace.cluster.ls
govc namespace.cluster.ls -l
govc namespace.cluster.ls -json | jq .
Options:
-l=false Long listing format
Usage: govc namespace.logs.download [OPTIONS] [NAME]
Download namespace cluster support bundle.
If NAME name is "-", bundle is written to stdout.
See also: govc logs.download
Examples:
govc namespace.logs.download -cluster k8s
govc namespace.logs.download -cluster k8s - | tar -xvf -
govc namespace.logs.download -cluster k8s logs.tar
Options:
-cluster= Cluster [GOVC_CLUSTER]
Usage: govc namespace.service.activate [OPTIONS] NAME...
Activates a vSphere Namespace Supervisor Service.
Examples:
govc namespace.service.activate my-supervisor-service other-supervisor-service
Options:
Usage: govc namespace.service.create [OPTIONS] MANIFEST
Creates a vSphere Namespace Supervisor Service.
Examples:
govc namespace.service.create manifest.yaml
Options:
Usage: govc namespace.service.deactivate [OPTIONS] NAME...
Deactivates a vSphere Namespace Supervisor Service.
Examples:
govc namespace.service.deactivate my-supervisor-service other-supervisor-service
Options:
Usage: govc namespace.service.info [OPTIONS] NAME
Gets information of a specific supervisor service.
Examples:
govc namespace.service.info my-supervisor-service
govc namespace.service.info -json my-supervisor-service | jq .
Options:
Usage: govc namespace.service.ls [OPTIONS]
List namepace registered supervisor services.
Examples:
govc namespace.service.ls
govc namespace.service.ls -l
govc namespace.service.ls -json | jq .
Options:
-l=false Long listing format
Usage: govc namespace.service.rm [OPTIONS] NAME...
Removes a vSphere Namespace Supervisor Service.
Examples:
govc namespace.service.rm my-supervisor-service other-supervisor-service
Options:
Usage: govc object.collect [OPTIONS] [MOID] [PROPERTY]...
Collect managed object properties.
MOID can be an inventory path or ManagedObjectReference.
MOID defaults to '-', an alias for 'ServiceInstance:ServiceInstance' or the root folder if a '-type' flag is given.
If a '-type' flag is given, properties are collected using a ContainerView object where MOID is the root of the view.
By default only the current property value(s) are collected. To wait for updates, use the '-n' flag or
specify a property filter. A property filter can be specified by prefixing the property name with a '-',
followed by the value to match.
The '-R' flag sets the Filter using the given XML encoded request, which can be captured by 'vcsim -trace' for example.
It can be useful for replaying property filters created by other clients and converting filters to Go code via '-O -dump'.
The '-type' flag value can be a managed entity type or one of the following aliases:
a VirtualApp
c ClusterComputeResource
d Datacenter
f Folder
g DistributedVirtualPortgroup
h HostSystem
m VirtualMachine
n Network
o OpaqueNetwork
p ResourcePool
r ComputeResource
s Datastore
w DistributedVirtualSwitch
Examples:
govc object.collect - content
govc object.collect -s HostSystem:ha-host hardware.systemInfo.uuid
govc object.collect -s /ha-datacenter/vm/foo overallStatus
govc object.collect -s /ha-datacenter/vm/foo -guest.guestOperationsReady true # property filter
govc object.collect -type m / name runtime.powerState # collect properties for multiple objects
govc object.collect -json -n=-1 EventManager:ha-eventmgr latestEvent | jq .
govc object.collect -json -s $(govc object.collect -s - content.perfManager) description.counterType | jq .
govc object.collect -R create-filter-request.xml # replay filter
govc object.collect -R create-filter-request.xml -O # convert filter to Go code
govc object.collect -s vm/my-vm summary.runtime.host | xargs govc ls -L # inventory path of VM's host
govc object.collect -dump -o "network/VM Network" # output Managed Object structure as Go code
govc object.collect -json $vm config | \ # use -json + jq to search array elements
jq -r '.[] | select(.Val.Hardware.Device[].MacAddress == "00:0c:29:0c:73:c0") | .Val.Name'
Options:
-O=false Output the CreateFilter request itself
-R= Raw XML encoded CreateFilter request
-d=, Delimiter for array values
-n=0 Wait for N property updates
-o=false Output the structure of a single Managed Object
-s=false Output property value only
-type=[] Resource type. If specified, MOID is used for a container view root
-wait=0s Max wait time for updates
Usage: govc object.destroy [OPTIONS] PATH...
Destroy managed objects.
Examples:
govc object.destroy /dc1/network/dvs /dc1/host/cluster
Options:
Usage: govc object.method [OPTIONS] PATH...
Enable or disable methods for managed objects.
Examples:
govc object.method -name Destroy_Task -enable=false /dc1/vm/foo
govc object.collect /dc1/vm/foo disabledMethod | grep --color Destroy_Task
govc object.method -name Destroy_Task -enable /dc1/vm/foo
Options:
-enable=true Enable method
-name= Method name
-reason= Reason for disabling method
-source=govc Source ID
Usage: govc object.mv [OPTIONS] PATH... FOLDER
Move managed entities to FOLDER.
Examples:
govc folder.create /dc1/host/example
govc object.mv /dc2/host/*.example.com /dc1/host/example
Options:
Usage: govc object.reload [OPTIONS] PATH...
Reload managed object state.
Examples:
govc datastore.upload $vm.vmx $vm/$vm.vmx
govc object.reload /dc1/vm/$vm
Options:
Usage: govc object.rename [OPTIONS] PATH NAME
Rename managed objects.
Examples:
govc object.rename /dc1/network/dvs1 Switch1
Options:
Usage: govc object.save [OPTIONS] [PATH]
Save managed objects.
By default, the object tree and all properties are saved, starting at PATH.
PATH defaults to ServiceContent, but can be specified to save a subset of objects.
The primary use case for this command is to save inventory from a live vCenter and
load it into a vcsim instance.
Examples:
govc object.save -d my-vcenter
vcsim -load my-vcenter
Options:
-1=false Save ROOT only, without its children
-d= Save objects in directory
-f=false Remove existing object directory
-folder= Inventory folder [GOVC_FOLDER]
-r=true Include children of the container view root
-type=[] Resource types to save. Defaults to all types
-v=false Verbose output
Usage: govc option.ls [OPTIONS] [NAME]
List option with the given NAME.
If NAME ends with a dot, all options for that subtree are listed.
Examples:
govc option.ls
govc option.ls config.vpxd.sso.
govc option.ls config.vpxd.sso.sts.uri
Options:
Usage: govc option.set [OPTIONS] NAME VALUE
Set option NAME to VALUE.
Examples:
govc option.set log.level info
govc option.set logger.Vsan verbose
Options:
Usage: govc permissions.ls [OPTIONS] [PATH]...
List the permissions defined on or effective on managed entities.
Examples:
govc permissions.ls
govc permissions.ls /dc1/host/cluster1
Options:
-a=true Include inherited permissions defined by parent entities
-i=false Use moref instead of inventory path
Usage: govc permissions.remove [OPTIONS] [PATH]...
Removes a permission rule from managed entities.
Examples:
govc permissions.remove -principal root
govc permissions.remove -principal [email protected] /dc1/host/cluster1
Options:
-f=false Ignore NotFound fault if permission for this entity and user or group does not exist
-group=false True, if principal refers to a group name; false, for a user name
-i=false Use moref instead of inventory path
-principal= User or group for which the permission is defined
Usage: govc permissions.set [OPTIONS] [PATH]...
Set the permissions managed entities.
Examples:
govc permissions.set -principal root -role Admin
govc permissions.set -principal [email protected] -role Admin /dc1/host/cluster1
Options:
-group=false True, if principal refers to a group name; false, for a user name
-i=false Use moref instead of inventory path
-principal= User or group for which the permission is defined
-propagate=true Whether or not this permission propagates down the hierarchy to sub-entities
-role=Admin Permission role name
Usage: govc pool.change [OPTIONS] POOL...
Change the configuration of one or more resource POOLs.
POOL may be an absolute or relative path to a resource pool or a (clustered)
compute host. If it resolves to a compute host, the associated root resource
pool is returned. If a relative path is specified, it is resolved with respect
to the current datacenter's "host" folder (i.e. /ha-datacenter/host).
Paths to nested resource pools must traverse through the root resource pool of
the selected compute host, i.e. "compute-host/Resources/nested-pool".
The same globbing rules that apply to the "ls" command apply here. For example,
POOL may be specified as "*/Resources/*" to expand to all resource pools that
are nested one level under the root resource pool, on all (clustered) compute
hosts in the current datacenter.
Options:
-cpu.expandable=<nil> CPU expandable reservation
-cpu.limit=<nil> CPU limit in MHz
-cpu.reservation=<nil> CPU reservation in MHz
-cpu.shares= CPU shares level or number
-mem.expandable=<nil> Memory expandable reservation
-mem.limit=<nil> Memory limit in MB
-mem.reservation=<nil> Memory reservation in MB
-mem.shares= Memory shares level or number
-name= Resource pool name
Usage: govc pool.create [OPTIONS] POOL...
Create one or more resource POOLs.
POOL may be an absolute or relative path to a resource pool. The parent of the
specified POOL must be an existing resource pool. If a relative path is
specified, it is resolved with respect to the current datacenter's "host"
folder (i.e. /ha-datacenter/host). The basename of the specified POOL is used
as the name for the new resource pool.
The same globbing rules that apply to the "ls" command apply here. For example,
the path to the parent resource pool in POOL may be specified as "*/Resources"
to expand to the root resource pools on all (clustered) compute hosts in the
current datacenter.
For example:
*/Resources/test Create resource pool "test" on all (clustered)
compute hosts in the current datacenter.
somehost/Resources/*/nested Create resource pool "nested" in every
resource pool that is a direct descendant of
the root resource pool on "somehost".
Options:
-cpu.expandable=true CPU expandable reservation
-cpu.limit=-1 CPU limit in MHz
-cpu.reservation=0 CPU reservation in MHz
-cpu.shares=normal CPU shares level or number
-mem.expandable=true Memory expandable reservation
-mem.limit=-1 Memory limit in MB
-mem.reservation=0 Memory reservation in MB
-mem.shares=normal Memory shares level or number
Usage: govc pool.destroy [OPTIONS] POOL...
Destroy one or more resource POOLs.
POOL may be an absolute or relative path to a resource pool or a (clustered)
compute host. If it resolves to a compute host, the associated root resource
pool is returned. If a relative path is specified, it is resolved with respect
to the current datacenter's "host" folder (i.e. /ha-datacenter/host).
Paths to nested resource pools must traverse through the root resource pool of
the selected compute host, i.e. "compute-host/Resources/nested-pool".
The same globbing rules that apply to the "ls" command apply here. For example,
POOL may be specified as "*/Resources/*" to expand to all resource pools that
are nested one level under the root resource pool, on all (clustered) compute
hosts in the current datacenter.
Options:
-children=false Remove all children pools
Usage: govc pool.info [OPTIONS] POOL...
Retrieve information about one or more resource POOLs.
POOL may be an absolute or relative path to a resource pool or a (clustered)
compute host. If it resolves to a compute host, the associated root resource
pool is returned. If a relative path is specified, it is resolved with respect
to the current datacenter's "host" folder (i.e. /ha-datacenter/host).
Paths to nested resource pools must traverse through the root resource pool of
the selected compute host, i.e. "compute-host/Resources/nested-pool".
The same globbing rules that apply to the "ls" command apply here. For example,
POOL may be specified as "*/Resources/*" to expand to all resource pools that
are nested one level under the root resource pool, on all (clustered) compute
hosts in the current datacenter.
Options:
-a=false List virtual app resource pools
-p=true List resource pools
Usage: govc role.create [OPTIONS] NAME [PRIVILEGE]...
Create authorization role.
Optionally populate the role with the given PRIVILEGE(s).
Examples:
govc role.create MyRole
govc role.create NoDC $(govc role.ls Admin | grep -v Datacenter.)
Options:
-i=false Use moref instead of inventory path
Usage: govc role.ls [OPTIONS] [NAME]
List authorization roles.
If NAME is provided, list privileges for the role.
Examples:
govc role.ls
govc role.ls Admin
Options:
-i=false Use moref instead of inventory path
Usage: govc role.remove [OPTIONS] NAME
Remove authorization role.
Examples:
govc role.remove MyRole
govc role.remove MyRole -force
Options:
-force=false Force removal if role is in use
-i=false Use moref instead of inventory path
Usage: govc role.update [OPTIONS] NAME [PRIVILEGE]...
Update authorization role.
Set, Add or Remove role PRIVILEGE(s).
Examples:
govc role.update MyRole $(govc role.ls Admin | grep VirtualMachine.)
govc role.update -r MyRole $(govc role.ls Admin | grep VirtualMachine.GuestOperations.)
govc role.update -a MyRole $(govc role.ls Admin | grep Datastore.)
govc role.update -name RockNRole MyRole
Options:
-a=false Add given PRIVILEGE(s)
-i=false Use moref instead of inventory path
-name= Change role name
-r=false Remove given PRIVILEGE(s)
Usage: govc role.usage [OPTIONS] NAME...
List usage for role NAME.
Examples:
govc role.usage
govc role.usage Admin
Options:
-i=false Use moref instead of inventory path
Usage: govc session.login [OPTIONS] [PATH]
Session login.
The session.login command is optional, all other govc commands will auto login when given credentials.
The session.login command can be used to:
- Persist a session without writing to disk via the '-cookie' flag
- Acquire a clone ticket
- Login using a clone ticket
- Login using a vCenter Extension certificate
- Issue a SAML token
- Renew a SAML token
- Login using a SAML token
- Avoid passing credentials to other govc commands
- Send an authenticated raw HTTP request
The session.login command can be used for authenticated curl-style HTTP requests when a PATH arg is given.
PATH may also contain a query string. The '-u' flag (GOVC_URL) is used for the URL scheme, host and port.
The request method (-X) defaults to GET. When set to POST, PUT or PATCH, a request body must be provided via stdin.
Examples:
govc session.login -u root:password@host # Creates a cached session in ~/.govmomi/sessions
govc session.ls -u root@host # Use the cached session with another command
ticket=$(govc session.login -u root@host -clone)
govc session.login -u root@host -ticket $ticket
govc session.login -u host -extension com.vmware.vsan.health -cert rui.crt -key rui.key
token=$(govc session.login -u host -cert user.crt -key user.key -issue) # HoK token
bearer=$(govc session.login -u user:pass@host -issue) # Bearer token
token=$(govc session.login -u host -cert user.crt -key user.key -issue -token "$bearer")
govc session.login -u host -cert user.crt -key user.key -token "$token"
token=$(govc session.login -u host -cert user.crt -key user.key -renew -lifetime 24h -token "$token")
# HTTP requests
govc session.login -r -X GET /api/vcenter/namespace-management/clusters | jq .
govc session.login -r -X POST /rest/vcenter/cluster/modules <<<'{"spec": {"cluster": "domain-c9"}}'
Options:
-X= HTTP method
-clone=false Acquire clone ticket
-cookie= Set HTTP cookie for an existing session
-extension= Extension name
-issue=false Issue SAML token
-l=false Output session cookie
-lifetime=10m0s SAML token lifetime
-r=false REST login
-renew=false Renew SAML token
-ticket= Use clone ticket for login
-token= Use SAML token for login or as issue identity
Usage: govc session.logout [OPTIONS]
Logout the current session.
The session.logout command can be used to end the current persisted session.
The session.rm command can be used to remove sessions other than the current session.
Examples:
govc session.logout
Options:
-r=false REST logout
Usage: govc session.ls [OPTIONS]
List active sessions.
All SOAP sessions are listed by default. The '-S' flag will limit this list to the current session.
Examples:
govc session.ls
govc session.ls -json | jq -r .CurrentSession.Key
Options:
-S=false List current SOAP session
-r=false List cached REST session (if any)
Usage: govc session.rm [OPTIONS] KEY...
Remove active sessions.
Examples:
govc session.ls | grep root
govc session.rm 5279e245-e6f1-4533-4455-eb94353b213a
Options:
Usage: govc snapshot.create [OPTIONS] NAME
Create snapshot of VM with NAME.
Examples:
govc snapshot.create -vm my-vm happy-vm-state
Options:
-d= Snapshot description
-m=true Include memory state
-q=false Quiesce guest file system
-vm= Virtual machine [GOVC_VM]
Usage: govc snapshot.remove [OPTIONS] NAME
Remove snapshot of VM with given NAME.
NAME can be the snapshot name, tree path, moid or '*' to remove all snapshots.
Examples:
govc snapshot.remove -vm my-vm happy-vm-state
Options:
-c=true Consolidate disks
-r=false Remove snapshot children
-vm= Virtual machine [GOVC_VM]
Usage: govc snapshot.revert [OPTIONS] [NAME]
Revert to snapshot of VM with given NAME.
If NAME is not provided, revert to the current snapshot.
Otherwise, NAME can be the snapshot name, tree path or moid.
Examples:
govc snapshot.revert -vm my-vm happy-vm-state
Options:
-s=false Suppress power on
-vm= Virtual machine [GOVC_VM]
Usage: govc snapshot.tree [OPTIONS]
List VM snapshots in a tree-like format.
The command will exit 0 with no output if VM does not have any snapshots.
Examples:
govc snapshot.tree -vm my-vm
govc snapshot.tree -vm my-vm -D -i -d
Options:
-C=false Print the current snapshot name only
-D=false Print the snapshot creation date
-c=true Print the current snapshot
-d=false Print the snapshot description
-f=false Print the full path prefix for snapshot
-i=false Print the snapshot id
-s=false Print the snapshot size
-vm= Virtual machine [GOVC_VM]
Usage: govc sso.group.create [OPTIONS] NAME
Create SSO group.
Examples:
govc sso.group.create NAME
Options:
-d= Group description
Usage: govc sso.group.ls [OPTIONS] [NAME]
List SSO groups.
Examples:
govc sso.group.ls
govc sso.group.ls group-name # list groups in group-name
govc sso.group.ls -search Admin # search for groups
Options:
-search= Search
Usage: govc sso.group.rm [OPTIONS] NAME
Remove SSO group.
Examples:
govc sso.group.rm NAME
Options:
Usage: govc sso.group.update [OPTIONS]
Update SSO group.
Examples:
govc sso.group.update -d "Group description" NAME
govc sso.group.update -a user1 NAME
govc sso.group.update -r user2 NAME
govc sso.group.update -g -a group1 NAME
govc sso.group.update -g -r group2 NAME
Options:
-a= Add user/group to group
-d= Group description
-g=false Add/Remove group from group
-r= Remove user/group from group
Usage: govc sso.idp.default.ls [OPTIONS]
List SSO default identity provider sources.
Examples:
govc sso.idp.default.ls
govc sso.idp.default.ls -json
Options:
Usage: govc sso.idp.default.update [OPTIONS] NAME
Set SSO default identity provider source.
Examples:
govc sso.idp.default.update NAME
Options:
Usage: govc sso.idp.ldap.update [OPTIONS] NAME
Update SSO ldap identity provider source.
Examples:
govc sso.idp.ldap.update -FriendlyName CORPLOCAL corp.local
Options:
-AuthPassword= Password
-AuthUsername= Username
-DomainAlias= DomainAlias
-FailoverUrl= FailoverUrl
-FriendlyName= FriendlyName
-GroupBaseDn= GroupBaseDn
-PrimaryUrl= PrimaryUrl
-ServerType=ActiveDirectory ServerType
-UserBaseDn= UserBaseDn
Usage: govc sso.idp.ls [OPTIONS]
List SSO identity provider sources.
Examples:
govc sso.idp.ls
govc sso.idp.ls -json
Options:
Usage: govc sso.lpp.info [OPTIONS]
Get SSO local password policy.
Examples:
govc sso.lpp.info
govc sso.lpp.info -json
Options:
Usage: govc sso.lpp.update [OPTIONS] NAME
Update SSO local password policy.
Examples:
govc sso.lpp.update -PasswordLifetimeDays 0
Options:
-Description= Description
-MaxIdenticalAdjacentCharacters=0 Maximum identical adjacent characters
-MaxLength=0 Maximum length
-MinAlphabeticCount=<nil> Minimum alphabetic count
-MinLength=<nil> Minimim length
-MinLowercaseCount=<nil> Minimum lowercase count
-MinNumericCount=<nil> Minimum numeric count
-MinSpecialCharCount=<nil> Minimum special characters count
-MinUppercaseCount=<nil> Minimum uppercase count
-PasswordLifetimeDays=<nil> Password lifetime days
-ProhibitedPreviousPasswordsCount=0 Prohibited previous passwords count
Usage: govc sso.service.ls [OPTIONS]
List platform services.
Examples:
govc sso.service.ls
govc sso.service.ls -t vcenterserver -P vmomi
govc sso.service.ls -t cs.identity
govc sso.service.ls -t cs.identity -P wsTrust -U
govc sso.service.ls -t cs.identity -json | jq -r .[].ServiceEndpoints[].Url
Options:
-P= Endpoint protocol
-T= Endpoint type
-U=false List endpoint URL(s) only
-l=false Long listing format
-n= Node ID
-p= Service product
-s= Site ID
-t= Service type
Usage: govc sso.user.create [OPTIONS] NAME
Create SSO users.
Examples:
govc sso.user.create -C "$(cat cert.pem)" -A -R Administrator NAME # solution user
govc sso.user.create -p password NAME # person user
Options:
-A=<nil> ActAsUser role for solution user WSTrust
-C= Certificate for solution user
-R= Role for solution user (RegularUser|Administrator)
-d= User description
-f= First name
-l= Last name
-m= Email address
-p= Password
Usage: govc sso.user.id [OPTIONS] NAME
Print SSO user and group IDs.
Examples:
govc sso.user.id
govc sso.user.id Administrator
govc sso.user.id -json Administrator
Options:
Usage: govc sso.user.ls [OPTIONS]
List SSO users.
Examples:
govc sso.user.ls -s
govc sso.user.ls -group group-name
Options:
-group=false List users in group
-s=false List solution users
-search= Search users in group
Usage: govc sso.user.rm [OPTIONS] NAME
Remove SSO users.
Examples:
govc sso.user.rm NAME
Options:
Usage: govc sso.user.update [OPTIONS] NAME
Update SSO users.
Examples:
govc sso.user.update -C "$(cat cert.pem)" NAME
govc sso.user.update -p password NAME
Options:
-A=<nil> ActAsUser role for solution user WSTrust
-C= Certificate for solution user
-R= Role for solution user (RegularUser|Administrator)
-d= User description
-f= First name
-l= Last name
-m= Email address
-p= Password
Usage: govc storage.policy.create [OPTIONS] NAME
Create VM Storage Policy.
Examples:
govc storage.policy.create -category my_cat -tag my_tag MyStoragePolicy # Tag based placement
Options:
-category= Category
-d= Description
-tag= Tag
Usage: govc storage.policy.info [OPTIONS] [NAME]
VM Storage Policy info.
Examples:
govc storage.policy.info
govc storage.policy.info "vSAN Default Storage Policy"
govc storage.policy.info -c -s
Options:
-c=false Check VM Compliance
-s=false Check Storage Compatibility
Usage: govc storage.policy.ls [OPTIONS] [NAME]
VM Storage Policy listing.
Examples:
govc storage.policy.ls
govc storage.policy.ls "vSAN Default Storage Policy"
govc storage.policy.ls -i "vSAN Default Storage Policy"
Options:
-i=false List policy ID only
Usage: govc storage.policy.rm [OPTIONS] ID
Remove Storage Policy ID.
Examples:
govc storage.policy.rm "my policy name"
govc storage.policy.rm af7935ab-466d-4b0e-af3c-4ec6bce2112f
Options:
Usage: govc tags.attach [OPTIONS] NAME PATH
Attach tag NAME to object PATH.
Examples:
govc tags.attach k8s-region-us /dc1
govc tags.attach -c k8s-region us-ca1 /dc1/host/cluster1
Options:
-c= Tag category
Usage: govc tags.attached.ls [OPTIONS] NAME
List attached tags or objects.
Examples:
govc tags.attached.ls k8s-region-us
govc tags.attached.ls -json k8s-zone-us-ca1 | jq .
govc tags.attached.ls -r /dc1/host/cluster1
govc tags.attached.ls -json -r /dc1 | jq .
Options:
-l=false Long listing format
-r=false List tags attached to resource
Usage: govc tags.category.create [OPTIONS] NAME
Create tag category.
This command will output the ID of the new tag category.
Examples:
govc tags.category.create -d "Kubernetes region" -t Datacenter k8s-region
govc tags.category.create -d "Kubernetes zone" k8s-zone
Options:
-d= Description
-m=false Allow multiple tags per object
-t=[] Object types
Usage: govc tags.category.info [OPTIONS] [NAME]
Display category info.
If NAME is provided, display info for only that category.
Otherwise display info for all categories.
Examples:
govc tags.category.info
govc tags.category.info k8s-zone
Options:
Usage: govc tags.category.ls [OPTIONS]
List all categories.
Examples:
govc tags.category.ls
govc tags.category.ls -json | jq .
Options:
Usage: govc tags.category.rm [OPTIONS] NAME
Delete category NAME.
Fails if category is used by any tag, unless the '-f' flag is provided.
Examples:
govc tags.category.rm k8s-region
govc tags.category.rm -f k8s-zone
Options:
-f=false Delete tag regardless of attached objects
Usage: govc tags.category.update [OPTIONS] NAME
Update category.
The '-t' flag can only be used to add new object types. Removing category types is not supported by vCenter.
Examples:
govc tags.category.update -n k8s-vcp-region -d "Kubernetes VCP region" k8s-region
govc tags.category.update -t ClusterComputeResource k8s-zone
Options:
-d= Description
-m=<nil> Allow multiple tags per object
-n= Name of category
-t=[] Object types
Usage: govc tags.create [OPTIONS] NAME
Create tag.
The '-c' option to specify a tag category is required.
This command will output the ID of the new tag.
Examples:
govc tags.create -d "Kubernetes Zone US CA1" -c k8s-zone k8s-zone-us-ca1
Options:
-c= Category name
-d= Description of tag
Usage: govc tags.detach [OPTIONS] NAME PATH
Detach tag NAME from object PATH.
Examples:
govc tags.detach k8s-region-us /dc1
govc tags.detach -c k8s-region us-ca1 /dc1/host/cluster1
Options:
-c= Tag category
Usage: govc tags.info [OPTIONS] NAME
Display tags info.
If NAME is provided, display info for only that tag. Otherwise display info for all tags.
Examples:
govc tags.info
govc tags.info k8s-zone-us-ca1
govc tags.info -c k8s-zone
Options:
-C=true Display category name instead of ID
-c= Category name
Usage: govc tags.ls [OPTIONS]
List tags.
Examples:
govc tags.ls
govc tags.ls -c k8s-zone
govc tags.ls -json | jq .
govc tags.ls -c k8s-region -json | jq .
Options:
-c= Category name
Usage: govc tags.rm [OPTIONS] NAME
Delete tag NAME.
Fails if tag is attached to any object, unless the '-f' flag is provided.
Examples:
govc tags.rm k8s-zone-us-ca1
govc tags.rm -f -c k8s-zone us-ca2
Options:
-c= Tag category
-f=false Delete tag regardless of attached objects
Usage: govc tags.update [OPTIONS] NAME
Update tag.
Examples:
govc tags.update -d "K8s zone US-CA1" k8s-zone-us-ca1
govc tags.update -d "K8s zone US-CA1" -c k8s-zone us-ca1
Options:
-c= Tag category
-d= Description of tag
-n= Name of tag
Usage: govc task.cancel [OPTIONS] ID...
Cancel tasks.
Examples:
govc task.cancel task-759
Options:
Usage: govc tasks [OPTIONS] [PATH]
Display info for recent tasks.
When a task has completed, the result column includes the task duration on success or
error message on failure. If a task is still in progress, the result column displays
the completion percentage and the task ID. The task ID can be used as an argument to
the 'task.cancel' command.
By default, all recent tasks are included (via TaskManager), but can be limited by PATH
to a specific inventory object.
Examples:
govc tasks
govc tasks -f
govc tasks -f /dc1/host/cluster1
Options:
-f=false Follow recent task updates
-l=false Use long task description
-n=25 Output the last N tasks
Usage: govc tree [OPTIONS] [PATH]
List contents of the inventory in a tree-like format.
Examples:
govc tree -C /
govc tree /datacenter/vm
Options:
-C=false Colorize output
-L=0 Max display depth of the inventory tree
-l=false Follow runtime references (e.g. HostSystem VMs)
-p=false Print the object type
Usage: govc vapp.destroy [OPTIONS] VAPP...
Options:
Usage: govc vapp.power [OPTIONS]
Options:
-force=false Force (If force is false, the shutdown order in the vApp is executed. If force is true, all virtual machines are powered-off (regardless of shutdown order))
-off=false Power off
-on=false Power on
-suspend=false Power suspend
-vapp.ipath= Find vapp by inventory path
Usage: govc vcsa.access.consolecli.get [OPTIONS]
Get enabled state of the console-based controlled CLI (TTY1).
Note: This command requires vCenter 7.0.2 or higher.
Examples:
govc vcsa.access.consolecli.get
Options:
Usage: govc vcsa.access.consolecli.set [OPTIONS]
Set enabled state of the console-based controlled CLI (TTY1).
Note: This command requires vCenter 7.0.2 or higher.
Examples:
# Enable Console CLI
govc vcsa.access.consolecli.set -enabled=true
# Disable Console CLI
govc vcsa.access.consolecli.set -enabled=false
Options:
-enabled=false Enable Console CLI.
Usage: govc vcsa.access.dcui.get [OPTIONS]
Get enabled state of Direct Console User Interface (DCUI TTY2).
Note: This command requires vCenter 7.0.2 or higher.
Examples:
govc vcsa.access.dcui.get
Options:
Usage: govc vcsa.access.dcui.set [OPTIONS]
Set enabled state of Direct Console User Interface (DCUI TTY2).
Note: This command requires vCenter 7.0.2 or higher.
Examples:
# Enable DCUI
govc vcsa.access.dcui.set -enabled=true
# Disable DCUI
govc vcsa.access.dcui.set -enabled=false
Options:
-enabled=false Enable Direct Console User Interface (DCUI TTY2).
Usage: govc vcsa.access.shell.get [OPTIONS]
Get enabled state of BASH, that is, access to BASH from within the controlled CLI.
Note: This command requires vCenter 7.0.2 or higher.
Examples:
govc vcsa.access.shell.get
Options:
Usage: govc vcsa.access.shell.set [OPTIONS]
Set enabled state of BASH, that is, access to BASH from within the controlled CLI.
Note: This command requires vCenter 7.0.2 or higher.
Examples:
# Enable Shell
govc vcsa.access.shell.set -enabled=true -timeout=240
# Disable Shell
govc vcsa.access.shell.set -enabled=false
Options:
-enabled=false Enable BASH, that is, access to BASH from within the controlled CLI.
-timeout=0 The timeout (in seconds) specifies how long you enable the Shell access. The maximum timeout is 86400 seconds(1 day).
Usage: govc vcsa.access.ssh.get [OPTIONS]
Get enabled state of the SSH-based controlled CLI.
Note: This command requires vCenter 7.0.2 or higher.
Examples:
govc vcsa.access.ssh.get
Options:
Usage: govc vcsa.access.ssh.set [OPTIONS]
Set enabled state of the SSH-based controlled CLI.
Note: This command requires vCenter 7.0.2 or higher.
Examples:
# Enable SSH
govc vcsa.access.ssh.set -enabled=true
# Disable SSH
govc vcsa.access.ssh.set -enabled=false
Options:
-enabled=false Enable SSH-based controlled CLI.
Usage: govc vcsa.log.forwarding.info [OPTIONS]
Retrieve the VC Appliance log forwarding configuration
Examples:
govc vcsa.log.forwarding.info
Options:
Usage: govc vcsa.net.proxy.info [OPTIONS]
Retrieve the VC networking proxy configuration
Examples:
govc vcsa.net.proxy.info
Options:
Usage: govc vcsa.shutdown.cancel [OPTIONS]
Cancel pending shutdown action.
Note: This command requires vCenter 7.0.2 or higher.
Examples:
govc vcsa.shutdown.cancel
Options:
Usage: govc vcsa.shutdown.get [OPTIONS]
Get details about the pending shutdown action.
Note: This command requires vCenter 7.0.2 or higher.
Examples:
govc vcsa.shutdown.get
Options:
Usage: govc vcsa.shutdown.poweroff [OPTIONS] REASON
Power off the appliance.
Note: This command requires vCenter 7.0.2 or higher.
Examples:
govc vcsa.shutdown.poweroff -delay 10 "powering off for maintenance"
Options:
-delay=0 Minutes after which poweroff should start.
Usage: govc vcsa.shutdown.reboot [OPTIONS] REASON
Reboot the appliance.
Note: This command requires vCenter 7.0.2 or higher.
Examples:
govc vcsa.shutdown.reboot -delay 10 "rebooting for maintenance"
Options:
-delay=0 Minutes after which reboot should start.
Usage: govc version [OPTIONS]
Options:
-l=false Print detailed govc version information
-require= Require govc version >= this value
Usage: govc vm.change [OPTIONS]
Change VM configuration.
To add ExtraConfig variables that can read within the guest, use the 'guestinfo.' prefix.
Examples:
govc vm.change -vm $vm -mem.reservation 2048
govc vm.change -vm $vm -e smc.present=TRUE -e ich7m.present=TRUE
# Enable both cpu and memory hotplug on a guest:
govc vm.change -vm $vm -cpu-hot-add-enabled -memory-hot-add-enabled
govc vm.change -vm $vm -e guestinfo.vmname $vm
# Read the contents of a file and use them as ExtraConfig value
govc vm.change -vm $vm -f guestinfo.data="$(realpath .)/vmdata.config"
# Read the variable set above inside the guest:
vmware-rpctool "info-get guestinfo.vmname"
govc vm.change -vm $vm -latency high
govc vm.change -vm $vm -latency normal
govc vm.change -vm $vm -uuid 4139c345-7186-4924-a842-36b69a24159b
govc vm.change -vm $vm -scheduled-hw-upgrade-policy always
Options:
-annotation= VM description
-c=0 Number of CPUs
-cpu-hot-add-enabled=<nil> Enable CPU hot add
-cpu.limit=<nil> CPU limit in MHz
-cpu.reservation=<nil> CPU reservation in MHz
-cpu.shares= CPU shares level or number
-e=[] ExtraConfig. <key>=<value>
-f=[] ExtraConfig. <key>=<absolute path to file>
-g= Guest OS
-iommu-enabled=<nil> Enable IOMMU
-latency= Latency sensitivity (low|normal|high)
-m=0 Size in MB of memory
-mem.limit=<nil> Memory limit in MB
-mem.reservation=<nil> Memory reservation in MB
-mem.shares= Memory shares level or number
-memory-hot-add-enabled=<nil> Enable memory hot add
-memory-pin=<nil> Reserve all guest memory
-name= Display name
-nested-hv-enabled=<nil> Enable nested hardware-assisted virtualization
-scheduled-hw-upgrade-policy= Schedule hardware upgrade policy (onSoftPowerOff|never|always)
-sync-time-with-host=<nil> Enable SyncTimeWithHost
-uuid= BIOS UUID
-vm= Virtual machine [GOVC_VM]
-vpmc-enabled=<nil> Enable CPU performance counters
Usage: govc vm.clone [OPTIONS] NAME
Clone VM or template to NAME.
Examples:
govc vm.clone -vm template-vm new-vm
govc vm.clone -vm template-vm -link new-vm
govc vm.clone -vm template-vm -snapshot s-name new-vm
govc vm.clone -vm template-vm -link -snapshot s-name new-vm
govc vm.clone -vm template-vm -cluster cluster1 new-vm # use compute cluster placement
govc vm.clone -vm template-vm -datastore-cluster dscluster new-vm # use datastore cluster placement
govc vm.clone -vm template-vm -snapshot $(govc snapshot.tree -vm template-vm -C) new-vm
govc vm.clone -vm template-vm -template new-template # clone a VM template
govc vm.clone -vm=/ClusterName/vm/FolderName/VM_templateName -on=true -host=myesxi01 -ds=datastore01 myVM_name
Options:
-annotation= VM description
-c=0 Number of CPUs
-cluster= Use cluster for VM placement via DRS
-customization= Customization Specification Name
-datastore-cluster= Datastore cluster [GOVC_DATASTORE_CLUSTER]
-ds= Datastore [GOVC_DATASTORE]
-folder= Inventory folder [GOVC_FOLDER]
-force=false Create VM if vmx already exists
-host= Host system [GOVC_HOST]
-link=false Creates a linked clone from snapshot or source VM
-m=0 Size in MB of memory
-net= Network [GOVC_NETWORK]
-net.adapter=e1000 Network adapter type
-net.address= Network hardware address
-on=true Power on VM
-pool= Resource pool [GOVC_RESOURCE_POOL]
-snapshot= Snapshot name to clone from
-template=false Create a Template
-vm= Virtual machine [GOVC_VM]
-waitip=false Wait for VM to acquire IP address
Usage: govc vm.console [OPTIONS] VM
Generate console URL or screen capture for VM.
One of VMRC, VMware Player, VMware Fusion or VMware Workstation must be installed to
open VMRC console URLs.
Examples:
govc vm.console my-vm
govc vm.console -capture screen.png my-vm # screen capture
govc vm.console -capture - my-vm | display # screen capture to stdout
open $(govc vm.console my-vm) # MacOSX VMRC
open $(govc vm.console -h5 my-vm) # MacOSX H5
xdg-open $(govc vm.console my-vm) # Linux VMRC
xdg-open $(govc vm.console -h5 my-vm) # Linux H5
Options:
-capture= Capture console screen shot to file
-h5=false Generate HTML5 UI console link
-vm= Virtual machine [GOVC_VM]
-wss=false Generate WebSocket console link
Usage: govc vm.create [OPTIONS] NAME
Create VM.
For a list of possible '-g' IDs, use 'govc vm.option.info' or see:
https://code.vmware.com/apis/358/vsphere/doc/vim.vm.GuestOsDescriptor.GuestOsIdentifier.html
Examples:
govc vm.create -on=false vm-name
govc vm.create -cluster cluster1 vm-name # use compute cluster placement
govc vm.create -datastore-cluster dscluster vm-name # use datastore cluster placement
govc vm.create -m 2048 -c 2 -g freebsd64Guest -net.adapter vmxnet3 -disk.controller pvscsi vm-name
Options:
-annotation= VM description
-c=1 Number of CPUs
-cluster= Use cluster for VM placement via DRS
-datastore-cluster= Datastore cluster [GOVC_DATASTORE_CLUSTER]
-disk= Disk path (to use existing) OR size (to create new, e.g. 20GB)
-disk-datastore= Datastore for disk file
-disk.controller=scsi Disk controller type
-ds= Datastore [GOVC_DATASTORE]
-firmware=bios Firmware type [bios|efi]
-folder= Inventory folder [GOVC_FOLDER]
-force=false Create VM if vmx already exists
-g=otherGuest Guest OS ID
-host= Host system [GOVC_HOST]
-iso= ISO path
-iso-datastore= Datastore for ISO file
-link=true Link specified disk
-m=1024 Size in MB of memory
-net= Network [GOVC_NETWORK]
-net.adapter=e1000 Network adapter type
-net.address= Network hardware address
-on=true Power on VM
-pool= Resource pool [GOVC_RESOURCE_POOL]
-version= ESXi hardware version [5.0|5.5|6.0|6.5|6.7|7.0]
Usage: govc vm.customize [OPTIONS] [NAME]
Customize VM.
Optionally specify a customization spec NAME.
The '-ip', '-netmask' and '-gateway' flags are for static IP configuration.
If the VM has multiple NICs, an '-ip' and '-netmask' must be specified for each.
The '-dns-server' and '-dns-suffix' flags can be specified multiple times.
Windows -tz value requires the Index (hex): https://support.microsoft.com/en-us/help/973627/microsoft-time-zone-index-values
Examples:
govc vm.customize -vm VM NAME
govc vm.customize -vm VM -name my-hostname -ip dhcp
govc vm.customize -vm VM -gateway GATEWAY -ip NEWIP -netmask NETMASK -dns-server DNS1,DNS2 NAME
# Multiple -ip without -mac are applied by vCenter in the order in which the NICs appear on the bus
govc vm.customize -vm VM -ip 10.0.0.178 -netmask 255.255.255.0 -ip 10.0.0.162 -netmask 255.255.255.0
# Multiple -ip with -mac are applied by vCenter to the NIC with the given MAC address
govc vm.customize -vm VM -mac 00:50:56:be:dd:f8 -ip 10.0.0.178 -netmask 255.255.255.0 -mac 00:50:56:be:60:cf -ip 10.0.0.162 -netmask 255.255.255.0
# Dual stack IPv4/IPv6, single NIC
govc vm.customize -vm VM -ip 10.0.0.1 -netmask 255.255.255.0 -ip6 '2001:db8::1/64' -name my-hostname NAME
# DHCPv6, single NIC
govc vm.customize -vm VM -ip6 dhcp6 NAME
# Static IPv6, three NICs, last one with two addresses
govc vm.customize -vm VM -ip6 2001:db8::1/64 -ip6 2001:db8::2/64 -ip6 2001:db8::3/64,2001:db8::4/64 NAME
govc vm.customize -vm VM -auto-login 3 NAME
govc vm.customize -vm VM -prefix demo NAME
govc vm.customize -vm VM -tz America/New_York NAME
Options:
-auto-login=0 Number of times the VM should automatically login as an administrator
-dns-server=[] DNS server list
-dns-suffix=[] DNS suffix list
-domain= Domain name
-gateway=[] Gateway
-ip=[] IPv4 address
-ip6=[] IPv6 addresses with optional netmask (defaults to /64), separated by comma
-mac=[] MAC address
-name= Host name
-netmask=[] Netmask
-prefix= Host name generator prefix
-type=Linux Customization type if spec NAME is not specified (Linux|Windows)
-tz= Time zone
-vm= Virtual machine [GOVC_VM]
Usage: govc vm.destroy [OPTIONS] VM...
Power off and delete VM.
When a VM is destroyed, any attached virtual disks are also deleted.
Use the 'device.remove -vm VM -keep disk-*' command to detach and
keep disks if needed, prior to calling vm.destroy.
Examples:
govc vm.destroy my-vm
Options:
Usage: govc vm.disk.attach [OPTIONS]
Attach existing disk to VM.
A delta disk is created by default, where changes are persisted. Specifying '-link=false' will persist to the same disk.
Examples:
govc vm.disk.attach -vm $name -disk $name/disk1.vmdk
govc device.info -vm $name disk-* # 'File' field is where changes are persisted. 'Parent' field is set when '-link=true'
govc vm.disk.attach -vm $name -disk $name/shared.vmdk -link=false -sharing sharingMultiWriter
govc device.remove -vm $name -keep disk-* # detach disk(s)
Options:
-controller= Disk controller
-disk= Disk path name
-ds= Datastore [GOVC_DATASTORE]
-link=true Link specified disk
-mode= Disk mode (persistent|nonpersistent|undoable|independent_persistent|independent_nonpersistent|append)
-persist=true Persist attached disk
-sharing= Sharing (sharingNone|sharingMultiWriter)
-vm= Virtual machine [GOVC_VM]
Usage: govc vm.disk.change [OPTIONS]
Change some properties of a VM's DISK
In particular, you can change the DISK mode, and the size (as long as it is bigger)
Examples:
govc vm.disk.change -vm VM -disk.key 2001 -size 10G
govc vm.disk.change -vm VM -disk.label "BDD disk" -size 10G
govc vm.disk.change -vm VM -disk.name "hard-1000-0" -size 12G
govc vm.disk.change -vm VM -disk.filePath "[DS] VM/VM-1.vmdk" -mode nonpersistent
Options:
-disk.filePath= Disk file name
-disk.io.limit=<nil> Disk storage IO per seconds limit (-1 for unlimited)
-disk.key=0 Disk unique key
-disk.label= Disk label
-disk.name= Disk name
-mode= Disk mode (persistent|nonpersistent|undoable|independent_persistent|independent_nonpersistent|append)
-sharing= Sharing (sharingNone|sharingMultiWriter)
-size=0B New disk size
-vm= Virtual machine [GOVC_VM]
Usage: govc vm.disk.create [OPTIONS]
Create disk and attach to VM.
Examples:
govc vm.disk.create -vm $name -name $name/disk1 -size 10G
govc vm.disk.create -vm $name -name $name/disk2 -size 10G -eager -thick -sharing sharingMultiWriter
Options:
-controller= Disk controller
-ds= Datastore [GOVC_DATASTORE]
-eager=false Eagerly scrub new disk
-mode=persistent Disk mode (persistent|nonpersistent|undoable|independent_persistent|independent_nonpersistent|append)
-name= Name for new disk
-sharing= Sharing (sharingNone|sharingMultiWriter)
-size=10.0GB Size of new disk
-thick=false Thick provision new disk
-vm= Virtual machine [GOVC_VM]
Usage: govc vm.guest.tools [OPTIONS] VM...
Manage guest tools in VM.
Examples:
govc vm.guest.tools -mount VM
govc vm.guest.tools -unmount VM
govc vm.guest.tools -upgrade -options "opt1 opt2" VM
Options:
-mount=false Mount tools CD installer in the guest
-options= Installer options
-unmount=false Unmount tools CD installer in the guest
-upgrade=false Upgrade tools in the guest
Usage: govc vm.info [OPTIONS] VM...
Display info for VM.
The '-r' flag displays additional info for CPU, memory and storage usage,
along with the VM's Datastores, Networks and PortGroups.
Examples:
govc vm.info $vm
govc vm.info -r $vm | grep Network:
govc vm.info -json $vm
govc find . -type m -runtime.powerState poweredOn | xargs govc vm.info
Options:
-e=false Show ExtraConfig
-g=true Show general summary
-r=false Show resource summary
-t=false Show ToolsConfigInfo
-waitip=false Wait for VM to acquire IP address
Usage: govc vm.instantclone [OPTIONS] NAME
Instant Clone VM to NAME.
Examples:
govc vm.instantclone -vm source-vm new-vm
# Configure ExtraConfig variables on a guest VM:
govc vm.instantclone -vm source-vm -e guestinfo.ipaddress=192.168.0.1 -e guestinfo.netmask=255.255.255.0 new-vm
# Read the variable set above inside the guest:
vmware-rpctool "info-get guestinfo.ipaddress"
vmware-rpctool "info-get guestinfo.netmask"
Options:
-ds= Datastore [GOVC_DATASTORE]
-e=[] ExtraConfig. <key>=<value>
-folder= Inventory folder [GOVC_FOLDER]
-net= Network [GOVC_NETWORK]
-net.adapter=e1000 Network adapter type
-net.address= Network hardware address
-pool= Resource pool [GOVC_RESOURCE_POOL]
-vm= Virtual machine [GOVC_VM]
Usage: govc vm.ip [OPTIONS] VM...
List IPs for VM.
By default the vm.ip command depends on vmware-tools to report the 'guest.ipAddress' field and will
wait until it has done so. This value can also be obtained using:
govc vm.info -json $vm | jq -r .VirtualMachines[].Guest.IpAddress
When given the '-a' flag, only IP addresses for which there is a corresponding virtual nic are listed.
If there are multiple nics, the listed addresses will be comma delimited. The '-a' flag depends on
vmware-tools to report the 'guest.net' field and will wait until it has done so for all nics.
Note that this list includes IPv6 addresses if any, use '-v4' to filter them out. IP addresses reported
by tools for which there is no virtual nic are not included, for example that of the 'docker0' interface.
These values can also be obtained using:
govc vm.info -json $vm | jq -r .VirtualMachines[].Guest.Net[].IpConfig.IpAddress[].IpAddress
When given the '-n' flag, filters '-a' behavior to the nic specified by MAC address or device name.
The 'esxcli' flag does not require vmware-tools to be installed, but does require the ESX host to
have the /Net/GuestIPHack setting enabled.
The 'wait' flag default to 1hr (original default was infinite). If a VM does not obtain an IP within
the wait time, the command will still exit with status 0.
Examples:
govc vm.ip $vm
govc vm.ip -wait 5m $vm
govc vm.ip -a -v4 $vm
govc vm.ip -n 00:0c:29:57:7b:c3 $vm
govc vm.ip -n ethernet-0 $vm
govc host.esxcli system settings advanced set -o /Net/GuestIPHack -i 1
govc vm.ip -esxcli $vm
Options:
-a=false Wait for an IP address on all NICs
-esxcli=false Use esxcli instead of guest tools
-n= Wait for IP address on NIC, specified by device name or MAC
-v4=false Only report IPv4 addresses
-wait=1h0m0s Wait time for the VM obtain an IP address
Usage: govc vm.keystrokes [OPTIONS] VM
Send Keystrokes to VM.
Examples:
Default Scenario
govc vm.keystrokes -vm $vm -s "root" # writes 'root' to the console
govc vm.keystrokes -vm $vm -c 0x15 # writes an 'r' to the console
govc vm.keystrokes -vm $vm -r 1376263 # writes an 'r' to the console
govc vm.keystrokes -vm $vm -c 0x28 # presses ENTER on the console
govc vm.keystrokes -vm $vm -c 0x4c -la=true -lc=true # sends CTRL+ALT+DEL to console
govc vm.keystrokes -vm $vm -c 0x15,KEY_ENTER # writes an 'r' to the console and press ENTER
List of available aliases:
KEY_0, KEY_1, KEY_102ND, KEY_2, KEY_3, KEY_4, KEY_5, KEY_6, KEY_7, KEY_8, KEY_9, KEY_A, KEY_AGAIN, KEY_APOSTROPHE, KEY_B, KEY_BACKSLASH, KEY_BACKSPACE, KEY_C, KEY_CAPSLOCK, KEY_COMMA, KEY_COMPOSE, KEY_COPY, KEY_CUT, KEY_D, KEY_DELETE, KEY_DOT, KEY_DOWN, KEY_E, KEY_END, KEY_ENTER, KEY_EQUAL, KEY_ERR_OVF, KEY_ESC, KEY_F, KEY_F1, KEY_F10, KEY_F11, KEY_F12, KEY_F13, KEY_F14, KEY_F15, KEY_F16, KEY_F17, KEY_F18, KEY_F19, KEY_F2, KEY_F20, KEY_F21, KEY_F22, KEY_F23, KEY_F24, KEY_F3, KEY_F4, KEY_F5, KEY_F6, KEY_F7, KEY_F8, KEY_F9, KEY_FIND, KEY_FRONT, KEY_G, KEY_GRAVE, KEY_H, KEY_HANGEUL, KEY_HANJA, KEY_HASHTILDE, KEY_HELP, KEY_HENKAN, KEY_HIRAGANA, KEY_HOME, KEY_I, KEY_INSERT, KEY_J, KEY_K, KEY_KATAKANA, KEY_KATAKANAHIRAGANA, KEY_KP0, KEY_KP1, KEY_KP2, KEY_KP3, KEY_KP4, KEY_KP5, KEY_KP6, KEY_KP7, KEY_KP8, KEY_KP9, KEY_KPASTERISK, KEY_KPCOMMA, KEY_KPDOT, KEY_KPENTER, KEY_KPEQUAL, KEY_KPJPCOMMA, KEY_KPLEFTPAREN, KEY_KPMINUS, KEY_KPPLUS, KEY_KPRIGHTPAREN, KEY_KPSLASH, KEY_L, KEY_LEFT, KEY_LEFTALT, KEY_LEFTBRACE, KEY_LEFTCTRL, KEY_LEFTMETA, KEY_LEFTSHIFT, KEY_M, KEY_MEDIA_BACK, KEY_MEDIA_CALC, KEY_MEDIA_COFFEE, KEY_MEDIA_EDIT, KEY_MEDIA_EJECTCD, KEY_MEDIA_FIND, KEY_MEDIA_FORWARD, KEY_MEDIA_MUTE, KEY_MEDIA_NEXTSONG, KEY_MEDIA_PLAYPAUSE, KEY_MEDIA_PREVIOUSSONG, KEY_MEDIA_REFRESH, KEY_MEDIA_SCROLLDOWN, KEY_MEDIA_SCROLLUP, KEY_MEDIA_SLEEP, KEY_MEDIA_STOP, KEY_MEDIA_STOPCD, KEY_MEDIA_VOLUMEDOWN, KEY_MEDIA_VOLUMEUP, KEY_MEDIA_WWW, KEY_MINUS, KEY_MOD_LALT, KEY_MOD_LCTRL, KEY_MOD_LMETA, KEY_MOD_LSHIFT, KEY_MOD_RALT, KEY_MOD_RCTRL, KEY_MOD_RMETA, KEY_MOD_RSHIFT, KEY_MUHENKAN, KEY_MUTE, KEY_N, KEY_NONE, KEY_NUMLOCK, KEY_O, KEY_OPEN, KEY_P, KEY_PAGEDOWN, KEY_PAGEUP, KEY_PASTE, KEY_PAUSE, KEY_POWER, KEY_PROPS, KEY_Q, KEY_R, KEY_RIGHT, KEY_RIGHTALT, KEY_RIGHTBRACE, KEY_RIGHTCTRL, KEY_RIGHTMETA, KEY_RIGHTSHIFT, KEY_RO, KEY_S, KEY_SCROLLLOCK, KEY_SEMICOLON, KEY_SLASH, KEY_SPACE, KEY_STOP, KEY_SYSRQ, KEY_T, KEY_TAB, KEY_U, KEY_UNDO, KEY_UP, KEY_V, KEY_VOLUMEDOWN, KEY_VOLUMEUP, KEY_W, KEY_X, KEY_Y, KEY_YEN, KEY_Z, KEY_ZENKAKUHANKAKU
Options:
-c= USB HID Codes (hex) or aliases, comma separated
-la=false Enable/Disable Left Alt
-lc=false Enable/Disable Left Control
-lg=false Enable/Disable Left Gui
-ls=false Enable/Disable Left Shift
-r=0 Raw USB HID Code Value (int32)
-ra=false Enable/Disable Right Alt
-rc=false Enable/Disable Right Control
-rg=false Enable/Disable Right Gui
-rs=false Enable/Disable Right Shift
-s= Raw String to Send
-vm= Virtual machine [GOVC_VM]
Usage: govc vm.markastemplate [OPTIONS] VM...
Mark VM as a virtual machine template.
Examples:
govc vm.markastemplate $name
Options:
Usage: govc vm.markasvm [OPTIONS] VM...
Mark VM template as a virtual machine.
Examples:
govc vm.markasvm -host host1 $name
govc vm.markasvm -host host1 $name
Options:
-host= Host system [GOVC_HOST]
-pool= Resource pool [GOVC_RESOURCE_POOL]
Usage: govc vm.migrate [OPTIONS] VM...
Migrates VM to a specific resource pool, host or datastore.
Examples:
govc vm.migrate -host another-host vm-1 vm-2 vm-3
govc vm.migrate -pool another-pool vm-1 vm-2 vm-3
govc vm.migrate -ds another-ds vm-1 vm-2 vm-3
Options:
-ds= Datastore [GOVC_DATASTORE]
-folder= Inventory folder [GOVC_FOLDER]
-host= Host system [GOVC_HOST]
-pool= Resource pool [GOVC_RESOURCE_POOL]
-priority=defaultPriority The task priority
-vm= Virtual machine [GOVC_VM]
Usage: govc vm.network.add [OPTIONS]
Add network adapter to VM.
Examples:
govc vm.network.add -vm $vm -net "VM Network" -net.adapter e1000e
govc vm.network.add -vm $vm -net SwitchName/PortgroupName
govc device.info -vm $vm ethernet-*
Options:
-net= Network [GOVC_NETWORK]
-net.adapter=e1000 Network adapter type
-net.address= Network hardware address
-vm= Virtual machine [GOVC_VM]
Usage: govc vm.network.change [OPTIONS] DEVICE
Change network DEVICE configuration.
Note that '-net' is currently required with '-net.address', even when not changing the VM network.
Examples:
govc vm.network.change -vm $vm -net PG2 ethernet-0
govc vm.network.change -vm $vm -net PG2 -net.address 00:00:0f:2e:5d:69 ethernet-0 # set to manual MAC address
govc vm.network.change -vm $vm -net PG2 -net.address - ethernet-0 # set to generated MAC address
govc device.info -vm $vm ethernet-*
Options:
-net= Network [GOVC_NETWORK]
-net.adapter=e1000 Network adapter type
-net.address= Network hardware address
-vm= Virtual machine [GOVC_VM]
Usage: govc vm.option.info [OPTIONS] [GUEST_ID]...
VM config options for CLUSTER.
The config option data contains information about the execution environment for a VM
in the given CLUSTER, and optionally for a specific HOST.
By default, supported guest OS IDs and full name are listed.
Examples:
govc vm.option.info -cluster C0
govc vm.option.info -cluster C0 -dump ubuntu64Guest
govc vm.option.info -cluster C0 -json | jq .GuestOSDescriptor[].Id
govc vm.option.info -host my_hostname
govc vm.option.info -vm my_vm
Options:
-cluster= Cluster [GOVC_CLUSTER]
-host= Host system [GOVC_HOST]
-vm= Virtual machine [GOVC_VM]
Usage: govc vm.power [OPTIONS] NAME...
Invoke VM power operations.
Examples:
govc vm.power -on VM1 VM2 VM3
govc vm.power -on -M VM1 VM2 VM3
govc vm.power -off -force VM1
Options:
-M=false Use Datacenter.PowerOnMultiVM method instead of VirtualMachine.PowerOnVM
-force=false Force (ignore state error and hard shutdown/reboot if tools unavailable)
-off=false Power off
-on=false Power on
-r=false Reboot guest
-reset=false Power reset
-s=false Shutdown guest
-standby=false Standby guest
-suspend=false Power suspend
-wait=true Wait for the operation to complete
Usage: govc vm.question [OPTIONS]
Options:
-answer= Answer to question
-vm= Virtual machine [GOVC_VM]
Usage: govc vm.rdm.attach [OPTIONS]
Attach DEVICE to VM with RDM.
Examples:
govc vm.rdm.attach -vm VM -device /vmfs/devices/disks/naa.000000000000000000000000000000000
Options:
-device= Device Name
-vm= Virtual machine [GOVC_VM]
Usage: govc vm.rdm.ls [OPTIONS]
List available devices that could be attach to VM with RDM.
Examples:
govc vm.rdm.ls -vm VM
Options:
-vm= Virtual machine [GOVC_VM]
Usage: govc vm.register [OPTIONS] VMX
Add an existing VM to the inventory.
VMX is a path to the vm config file, relative to DATASTORE.
Examples:
govc vm.register path/name.vmx
govc vm.register -template -host $host path/name.vmx
Options:
-ds= Datastore [GOVC_DATASTORE]
-folder= Inventory folder [GOVC_FOLDER]
-host= Host system [GOVC_HOST]
-name= Name of the VM
-pool= Resource pool [GOVC_RESOURCE_POOL]
-template=false Mark VM as template
Usage: govc vm.unregister [OPTIONS] VM...
Remove VM from inventory without removing any of the VM files on disk.
Options:
Usage: govc vm.upgrade [OPTIONS]
Upgrade VMs to latest hardware version
Examples:
govc vm.upgrade -vm $vm_name
govc vm.upgrade -version=$version -vm $vm_name
govc vm.upgrade -version=$version -vm.uuid $vm_uuid
Options:
-version=0 Target vm hardware version, by default -- latest available
-vm= Virtual machine [GOVC_VM]
Usage: govc vm.vnc [OPTIONS] VM...
Enable or disable VNC for VM.
Port numbers are automatically chosen if not specified.
If neither -enable or -disable is specified, the current state is returned.
Examples:
govc vm.vnc -enable -password 1234 $vm | awk '{print $2}' | xargs open
Options:
-disable=false Disable VNC
-enable=false Enable VNC
-password= VNC password
-port=-1 VNC port (-1 for auto-select)
-port-range=5900-5999 VNC port auto-select range
Usage: govc volume.ls [OPTIONS] [ID...]
List CNS volumes.
Examples:
govc volume.ls
govc volume.ls -l
govc volume.ls -ds vsanDatastore
govc volume.ls df86393b-5ae0-4fca-87d0-b692dbc67d45
govc disk.ls -l $(govc volume.ls -L pvc-9744a4ff-07f4-43c4-b8ed-48ea7a528734)
Options:
-L=false List volume disk or file backing ID only
-ds= Datastore [GOVC_DATASTORE]
-i=false List volume ID only
-l=false Long listing format
Usage: govc volume.rm [OPTIONS] ID
Remove CNS volume.
Note: if volume.rm returns not found errors,
consider using 'govc disk.ls -R' to reconcile the datastore inventory.
Examples:
govc volume.rm f75989dc-95b9-4db7-af96-8583f24bc59d
Options:
Usage: govc volume.snapshot.create [OPTIONS] [ID] [DESC]
Create snapshot of volume ID with description DESC.
Examples:
govc volume.snapshot.create df86393b-5ae0-4fca-87d0-b692dbc67d45 my-snapshot
govc volume.snapshot.create -i df86393b-5ae0-4fca-87d0-b692dbc67d45 my-snapshot
Options:
-i=false Output snapshot ID and volume ID only
Usage: govc volume.snapshot.ls [OPTIONS] [ID]...
List all snapshots of volume ID.
Use a list of volume IDs to list all snapshots of multiple volumes at once.
Examples:
govc volume.snapshot.ls df86393b-5ae0-4fca-87d0-b692dbc67d45
govc volume.snapshot.ls -i df86393b-5ae0-4fca-87d0-b692dbc67d45
govc volume.snapshot.ls -l df86393b-5ae0-4fca-87d0-b692dbc67d45
govc volume.snapshot.ls -l $(govc volume.ls -i)
Options:
-i=false List snapshot ID and volume ID only
-l=false Long listing format
Usage: govc volume.snapshot.rm [OPTIONS] [SNAP_ID VOL_ID]...
Remove snapshot SNAP_ID from volume VOL_ID.
Use a list of [SNAP_ID VOL_ID] pairs to remove multiple snapshots at once.
Examples:
govc volume.snapshot.rm f75989dc-95b9-4db7-af96-8583f24bc59d df86393b-5ae0-4fca-87d0-b692dbc67d45
govc volume.snapshot.rm $(govc volume.snapshot.ls -i df86393b-5ae0-4fca-87d0-b692dbc67d45)
govc volume.snapshot.rm $(govc volume.snapshot.create -i df86393b-5ae0-4fca-87d0-b692dbc67d45 my-snapshot)
govc volume.snapshot.rm $(govc volume.snapshot.ls -i $(govc volume.ls -i))
Options:
Usage: govc vsan.change [OPTIONS] CLUSTER
Change vSAN configuration.
Examples:
govc vsan.change -unmap-enabled ClusterA # enable unmap
govc vsan.change -unmap-enabled=false ClusterA # disable unmap
Options:
-unmap-enabled=<nil> Enable Unmap
Usage: govc vsan.info [OPTIONS] CLUSTER...
Display vSAN configuration.
Examples:
govc vsan.info
govc vsan.info ClusterA
govc vsan.info -json
Options: