fix(Boards, Examples): Fix MAX32690 GPIO Example #2012

Summary
Jobs
- verify
Run details
- Usage
- Workflow file

Workflow file for this run

.github/workflows/Verify_Register_SVD.yml at e926cf2

	name: Verify Register and SVD Files

	concurrency:
	group: ${{ github.workflow }}-${{ github.ref }}
	cancel-in-progress: true

	# Controls when the workflow will run
	on:
	# Triggers the workflow on push or pull request events but only for the "main" branch
	push:
	branches: [ "main" ]
	pull_request:
	branches: [ "main" ]

	# Allows you to run this workflow manually from the Actions tab
	workflow_dispatch:

	env:
	MSDK_DIR: msdk
	MSDK-INTERNAL_DIR: msdk-internal

	# Check effected parts.
	# GLOSSARY:
	# Chip name will mean the designation number of microcontroller like MAX32670 and MAX78000
	# Die name will refer to the die type name of micrcontroller like ME15 and AI85
	# Part will mean the microcontroller product itself, could refer to chip name or die name
	AFFECTED_PARTS: none

	# Don't run the workflow if none of the register files changed.
	DIFF_FILES_FLAG: false

	# A workflow run is made up of one or more jobs that can run sequentially or in parallel
	jobs:
	# The verify job will check the differences with any updated register file.
	verify:
	# The type of runner that the job will run on
	runs-on: [ self-hosted, btm-ci ]

	steps:
	- name: Clean
	continue-on-error: true
	run: \|
	# Remove local modifications
	set +e
	# Attempt to clean the repo
	git scorch
	retval=$?
	# Remove everything if this fails
	if [[ $retval -ne 0 ]]
	then
	rm -rf *
	fi
	set -e

	cd ..
	pwd
	ls

	# Checks-out MSDK and MSDK-INTERNAL repositories under $GITHUB_WORKSPACE, so your job can access it
	- name: Checkout msdk repository
	uses: actions/checkout@v3
	with:
	# Update the submodules below, doing so here will convert ssh to https
	ref: ${{ github.event.pull_request.head.ref }}
	repository: ${{ github.event.pull_request.head.repo.full_name }}
	submodules: false
	fetch-depth: 0
	# path: ${{ env.MSDK_DIR }}

	- name: Checkout msdk internal repository
	run: \|
	cd ..
	pwd
	ls

	# BTM-CI might already have the msdk-internal repo cloned.
	if [[ -d ${{ env.MSDK-INTERNAL_DIR }} ]]; then
	cd ${{ env.MSDK-INTERNAL_DIR }}
	pwd
	git pull
	cd ..
	pwd
	else
	pwd
	git clone [email protected]:Analog-Devices-MSDK/msdk-internal.git
	ls
	fi

	# Use these next steps to verify if register files were updated.
	# Easier to read in Actions' console window if separated by steps.
	- name: Checking if register files or peripheral SVD files were updated.
	run: \|
	pwd
	ls

	enter_msdk=0
	if [[ -d ${{ env.MSDK_DIR }} ]]; then
	cd ${{ env.MSDK_DIR }}
	enter_msdk=1
	fi

	git fetch
	CHANGED_FILES=$(git diff --ignore-submodules --name-only @ remotes/origin/main './Libraries/CMSIS/Device/Maxim//Include/_regs.h' './Libraries/PeriphDrivers/Source//.svd')

	if [[ -n ${CHANGED_FILES} ]]; then
	echo "DIFF_FILES_FLAG=true" >> $GITHUB_ENV
	else
	echo "No register file changed."
	fi

	if [[ $enter_msdk == 1 ]]; then
	cd ..
	fi

	# This step is just to indicate status of job in Actions' console if there are no
	# register file changes.
	- name: No register files changes detected. Verification Completed.
	if: env.DIFF_FILES_FLAG == 'false'
	run: \|
	echo "None of the committed files were updated register files. No need to check differences."
	exit 0

	# Check for any deleted peripheral SVD file
	- name: Verifying any deleted Peripheral SVD files.
	if: env.DIFF_FILES_FLAG == 'true'
	run: \|
	# Workspace doesn't return to home after each step.
	cd ..
	pwd
	ls

	cd ${{ env.MSDK_DIR }}
	PERIPH_SVD_FILE_LIST=$(git diff --ignore-submodules --name-only remotes/origin/main './Libraries/PeriphDrivers/Source//.svd')

	# Save time if there weren't any peripheral SVD file changes.
	if [[ -n $PERIPH_SVD_FILE_LIST ]]; then
	# Keep track of all deleted SVD files.
	DELETED_PERIPH_SVD_FILE_LIST=""

	for svd_file in $PERIPH_SVD_FILE_LIST
	do
	# Make sure deleted peripheral SVD file is a necessary for the register generation.
	is_necessary_svd_files=$(find ../${{ env.MSDK-INTERNAL_DIR }}/SVD/Devices/*/$CHIP_PERIPH -exec grep -s "$svd_file" {} \;)
	if [[ -n $is_necessary_svd_files ]]; then
	# Check for deletion
	if [[ ! -f "$svd_file" ]]; then
	# Add space delimiter for variable string list
	if [[ -n $DELETED_SVD_FILE_LIST ]]; then
	DELETED_PERIPH_SVD_FILE_LIST+=" "
	fi

	DELETED_PERIPH_SVD_FILE_LIST+=$svd_file
	fi
	fi
	done

	# Check fails if any important peripheral SVD file was deleted
	if [[ -n $DELETED_PERIPH_SVD_FILE_LIST ]]; then
	echo -e "\n\e[0;33m==================================================================\n"
	echo -e "\e[0;33mImportant Peripheral SVD Files were deleted."
	echo -e "\n\e[0;33m==================================================================\n"

	for deleted_svd_file in $DELETED_PERIPH_SVD_FILE_LIST
	do
	echo -e "[\e[1;31mERROR\e[0m]: $deleted_svd_file was deleted"
	done

	# Just for log output formatting
	echo -e "\n"

	exit 1
	fi
	fi

	echo -e "\n\e[0;33m==================================================================\n"
	echo -e "\e[0;33mNo Important Peripheral SVD Files were deleted."
	echo -e "\n\e[0;33m==================================================================\n"

	# Exit msdk repo for next step.
	cd ..

	# Generate the register file for all affected parts.
	# Only generate register files if there are committed register files to verify And if the software packages properly installed. \
	# Saves time if there are no register file changes.
	- name: Detected Register File Change(s). Verifying if Register & SVD Files are synced.
	if: env.DIFF_FILES_FLAG == 'true'
	run: \|
	# Verifying register files.

	# Important terms:
	# Changed/Updated files refers to files that were changed in the PR. The files you changed.
	# Generated file (usually register files) are the files that were generated using scripts.
	# Die name - e.g. ME17, AI87, ES17
	# Chip name - e.g. MAX32655, MAX78002, MAX32520

	# Create associative array for dictionary
	declare -A CHIP_TO_DIE_NAMES
	declare -A DIE_TO_CHIP_NAMES

	# Keep track of Changed register files for each part
	declare -A CHANGED_REG_FILES_PER_PART

	# Keep track of all the Changed register files to its corresponding generated register file
	declare -A DIFF_PR_REG_TO_SVD_REG_LIST

	# Keep track of corresponding Changed Register File to its Peripheral SVD File
	declare -A REGISTER_SVD_FILE_LIST

	# Add future parts to this dictionary
	CHIP_TO_DIE_NAMES[MAX78000]=AI85
	CHIP_TO_DIE_NAMES[MAX78002]=AI87
	CHIP_TO_DIE_NAMES[MAX32520]=ES17
	CHIP_TO_DIE_NAMES[MAX32650]=ME10
	CHIP_TO_DIE_NAMES[MAX32660]=ME11
	CHIP_TO_DIE_NAMES[MAX32662]=ME12
	# CHIP_TO_DIE_NAMES[MAX32570]=ME13
	CHIP_TO_DIE_NAMES[MAX32665]=ME14
	CHIP_TO_DIE_NAMES[MAX32670]=ME15
	CHIP_TO_DIE_NAMES[MAX32675]=ME16
	CHIP_TO_DIE_NAMES[MAX32655]=ME17
	CHIP_TO_DIE_NAMES[MAX32690]=ME18
	CHIP_TO_DIE_NAMES[MAX32680]=ME20
	CHIP_TO_DIE_NAMES[MAX32672]=ME21
	#CHIP_TO_DIE_NAMES[MAX32572]=ME55

	DIE_TO_CHIP_NAMES[AI85]=MAX78000
	DIE_TO_CHIP_NAMES[AI87]=MAX78002
	DIE_TO_CHIP_NAMES[ES17]=MAX32520
	DIE_TO_CHIP_NAMES[ME10]=MAX32650
	DIE_TO_CHIP_NAMES[ME11]=MAX32660
	DIE_TO_CHIP_NAMES[ME12]=MAX32662
	# DIE_TO_CHIP_NAMES[ME13]=MAX32570
	DIE_TO_CHIP_NAMES[ME14]=MAX32665
	DIE_TO_CHIP_NAMES[ME15]=MAX32670
	DIE_TO_CHIP_NAMES[ME16]=MAX32675
	DIE_TO_CHIP_NAMES[ME17]=MAX32655
	DIE_TO_CHIP_NAMES[ME18]=MAX32690
	DIE_TO_CHIP_NAMES[ME20]=MAX32680
	DIE_TO_CHIP_NAMES[ME21]=MAX32672
	#DIE_TO_CHIP_NAMES[ME55]=MAX32572

	# This set keeps tracks of all the parts (chip names) with updated register files. (No duplicates).
	# The path to the register files from top of MSDK repo requires chip name.
	AFFECTED_CHIP_SET=()

	# This list keeps tracks of all the parts (die names) with updated register files.
	# The path to the generated register files requires the die name.
	AFFECTED_DIE_LIST=""

	# File containing SVD paths
	CHIP_PERIPH="chip_periph.txt"

	#---------= START - FUNCTION find_linked_register_files =---------
	# Function to check for all register files linked to SVD file.
	# Option to exclude the part that triggered the discovery of the SVD file differences.
	# For example: if ME12's icc_regs.h was changed but not the corresponding icc_reva.svd, then this function
	# will search for any register files dependent on icc_reva.svd but Not the ME12's icc_regs.h
	# since the ME12 is what triggered the icc_reva.svd differences. This is mainly to help format with the log output.
	# This function depends on relative paths from workspace.
	# Inputs:
	# $1 - Current peripheral SVD file that you're comparing all the other register/peripheral SVD files to (You can include path to SVD file or just the file name)
	# $2 - Periperal of current peripheral SVD file
	# $3 - Chip name of current peripheral SVD file.
	# $4 - Path to workspace (outside of msdk and msdk-internal repos)
	# Return:
	# $? - List of register files that are linked and aren't synced to the SVD file.
	function find_linked_register_files() {
	svd_file=$1
	# Make lowercase
	periph=${2,,}
	chip_name=$3
	workspace_path=$4

	# chip_name is used to access an associative array (CHIP_TO_DIE_NAMES). Empty key throws an error.
	if [[ -z $chip_name ]]; then
	chip_name=no_chip_name
	fi

	cd ./${workspace_path}/${{ env.MSDK-INTERNAL_DIR }}/SVD/Devices/

	# Equivalent to SVD_DEVICES=$(ls), but will need to parse SVD_DEVICES
	declare -a SVD_DEVICES
	for file in *
	do
	[[ -d $file ]] \|\| continue

	if [[ ${DIE_TO_CHIP_NAMES[$file]+_} ]]; then
	SVD_DEVICES+=($file)
	fi
	done

	for part in ${SVD_DEVICES[@]}
	do
	# Exclude the part that triggered discovery of SVD file (if any)
	# Exclude any folders not relating to any of the parts
	if [[ ${DIE_TO_CHIP_NAMES[$part]+_} && -d $part && $part != ${CHIP_TO_DIE_NAMES[$chip_name]} ]]; then
	cd $part

	check_if_svd_file_exists=$(find $CHIP_PERIPH -exec grep -s "$svd_file" {} \;)

	if [[ -n $check_if_svd_file_exists ]]; then
	# Need to generate register files for part if it wasn't already generated.
	if [[ ! (-d ./chip_test) ]]; then
	chmod u+x makeRegs.sh
	make=$(bash makeRegs.sh ubuntu)
	fi

	# Currently in msdk-internal/SVD/Device/{PART}/
	# If the "current peripheral SVD file" (Check function notes) was updated, then check all the other peripheral SVD files to the current peripheral SVD file
	# ./chip_test/{$periph}_regs.h should exist since the input was the {$periph}'s' SVD file.
	if [[ -f ../../../../${{ env.MSDK_DIR }}/Libraries/CMSIS/Device/Maxim/${DIE_TO_CHIP_NAMES[$part]}/Include/${periph}_regs.h ]]; then
	check_linked_reg_diffs=$(diff -u ../../../../${{ env.MSDK_DIR }}/Libraries/CMSIS/Device/Maxim/${DIE_TO_CHIP_NAMES[$part]}/Include/${periph}_regs.h ./chip_test/${periph}_regs.h)
	else
	check_linked_reg_diffs=missing
	fi

	check_orig_reg_diffs=""
	# If a register file was changed but not the generic peripheral SVD file.
	if [[ "$chip_name" != "no_chip_name" ]]; then
	check_orig_reg_diffs=$(diff -u ../../../../${{ env.MSDK_DIR }}/Libraries/CMSIS/Device/Maxim/${chip_name}/Include/${periph}_regs.h ../${CHIP_TO_DIE_NAMES[$chip_name]}/chip_test/${periph}_regs.h)
	fi

	if [[ -n $check_linked_reg_diffs \|\| -n $check_orig_reg_diffs ]]; then
	periph="${periph##*/}"
	echo "Libraries/CMSIS/Device/Maxim/${DIE_TO_CHIP_NAMES[$part]}/Include/${periph}_regs.h"
	fi
	fi

	cd ..
	fi

	done

	# Return to workspace
	cd ../../../
	}
	#---------= END - FUNCTION find_linked_register_files =---------

	#---------------------------
	# Grab the part relating to the changed register file and add them to appropriate lists.
	# Note: This only works for register files in this path:
	# msdk/Libraries/CMSIS/Device/Maxim/[CHIP_NAME]/Include/*_regs.h
	echo -e "\n\e[0;33m==================================================================\n"
	echo -e "\e[0;33mScanning for any changes in register files"
	echo -e "\n\e[0;33m==================================================================\n"

	# Workspace doesn't return to home after each step.
	cd ..

	# Find diff in MSDK repo
	cd ${{ env.MSDK_DIR }}
	CHANGED_REGISTER_FILES=$(git diff --ignore-submodules --name-only remotes/origin/main './Libraries/CMSIS/Device/Maxim//Include/_regs.h')
	CHANGED_PERIPH_SVD_FILES=$(git diff --ignore-submodules --name-only remotes/origin/main './Libraries/PeriphDrivers/Source//.svd')

	# This includes all register files linked to any changed peripheral SVD files even if said register files were not changed in the PR.
	CHANGED_OR_AFFECTED_REGISTER_FILES=$CHANGED_REGISTER_FILES
	if [[ -n $CHANGED_PERIPH_SVD_FILES ]]; then
	reg_files_linked_to_changed_svd_files=""

	# Find SVD files and their corresponding register files.
	for changed_svd_file in $CHANGED_PERIPH_SVD_FILES
	do
	# Isolate to file name.
	periph=${changed_svd_file##*/Source}

	# Check if "Peripheral Rev#" SVD File or "SYS/SVD" (e.g. gcr_me14.svd) SVD File.
	if [[ "$periph" =~ "_rev" ]]; then
	periph="${periph##*/AESKEYS}"
	periph="${periph%_rev*}"
	else
	periph="${periph##*/SVD}"

	# Remove attached die type name (Usually SYS register SVD files like gcr_me14.svd and fcr_me18.svd)
	for die_name in ${!DIE_TO_CHIP_NAMES[@]}
	do
	lowercase_die_name=${die_name,,}

	if [[ "$periph" =~ "_${lowercase_die_name}" ]]; then
	periph="${periph%_${lowercase_die_name}*}"
	break
	fi
	done
	fi

	if [[ -n $reg_files_linked_to_changed_svd_files ]]; then
	reg_files_linked_to_changed_svd_files+=" "
	fi

	reg_files_linked_to_changed_svd_files+=$(find_linked_register_files $changed_svd_file $periph "" ../)
	done

	# Add linked register files to changed peripheral files to CHANGED_REGISTER_FILES list.
	if [[ -z $CHANGED_REGISTER_FILES ]]; then
	CHANGED_OR_AFFECTED_REGISTER_FILES=$reg_files_linked_to_changed_svd_files
	else
	# CHANGED_OR_AFFECTED_REGISTER_FILES should already have a list of changed register files, so just add on linked register files.
	for linked_reg_file in $reg_files_linked_to_changed_svd_files
	do
	if [[ ! "$CHANGED_OR_AFFECTED_REGISTER_FILES" =~ "$linked_reg_file" ]]; then
	if [[ -n $CHANGED_OR_AFFECTED_REGISTER_FILES ]]; then
	CHANGED_OR_AFFECTED_REGISTER_FILES+=" "
	fi
	CHANGED_OR_AFFECTED_REGISTER_FILES+=$linked_reg_file
	fi
	done
	fi
	fi

	CHANGED_OR_AFFECTED_REGISTER_FILES=$(echo $CHANGED_OR_AFFECTED_REGISTER_FILES \| tr " " "\n" \| sort \| tr "\n" " ")

	# Check for new parts that haven't been added to the dictionary.
	UNKNOWN_PARTS_DET_FLAG=0
	for changed_reg_file in $CHANGED_OR_AFFECTED_REGISTER_FILES
	do
	# Removing (prefix) path to [CHIP_NAME]/Include/*_regs.h
	CHIP_NAME=${changed_reg_file#*/Maxim/}
	# Remove (suffix) following path /Include/*_regs.h to get the [CHIP_NAME]
	CHIP_NAME=${CHIP_NAME%%/*}

	# Verify the part with the register/svd file changes is a valid part.
	if [[ -v CHIP_TO_DIE_NAMES[$CHIP_NAME] ]]; then
	# Each element (part) of associative array is a list of changed files
	# Add space delimiter if not empty
	if [[ -n ${CHANGED_REG_FILES_PER_PART[${CHIP_TO_DIE_NAMES[$CHIP_NAME]}]} ]]; then
	CHANGED_REG_FILES_PER_PART[${CHIP_TO_DIE_NAMES[$CHIP_NAME]}]+=" "
	fi
	CHANGED_REG_FILES_PER_PART[${CHIP_TO_DIE_NAMES[$CHIP_NAME]}]+=$changed_reg_file
	else
	echo -e "[\e[1;31mERROR\e[0m]: $changed_reg_file"

	# Increment flag to keep track number of unknown register files
	UNKNOWN_PARTS_DET_FLAG=$(expr $UNKNOWN_PARTS_DET_FLAG + 1)

	# Forgo following operations if unknown part was added to the MSDK.
	continue
	fi

	# Keep track of affected parts, don't add duplicates.
	if [[ ! "${AFFECTED_CHIP_SET[*]}" =~ "$CHIP_NAME" ]]; then
	AFFECTED_CHIP_SET+=("$CHIP_NAME")

	# Create list with die name of affected parts for SVD scripts as you go
	# List will have " " (space) as the delimiter
	# Only add space when you're adding more than one item into list.
	if [[ -n "$AFFECTED_DIE_LIST" ]]; then
	AFFECTED_DIE_LIST+=" "
	fi
	AFFECTED_DIE_LIST+="${CHIP_TO_DIE_NAMES[$CHIP_NAME]}"
	fi

	# Keep track of all diff files.
	DIFF_PR_REG_TO_SVD_REG_LIST[./${{ env.MSDK_DIR }}/$changed_reg_file]=./${{ env.MSDK-INTERNAL_DIR }}/SVD/Devices/${CHIP_TO_DIE_NAMES[$CHIP_NAME]}/chip_test/${changed_reg_file##*/}
	echo -e "[\e[1;33mAFFECTED\e[0m]: $changed_reg_file"
	done

	# Halt workflow if an unknown part was detected
	if [[ $UNKNOWN_PARTS_DET_FLAG != 0 ]]; then
	echo -e "\n[\e[1;31mERROR\e[0m]: Unknown part(s) detected. \e[1;31m$UNKNOWN_PARTS_DET_FLAG \e[0mfile(s) linked to unknown part(s)."
	echo -e "[\e[1;31mERROR\e[0m]: Please verify the part relating to the affected register file(s) is valid and defined in the workflow dictionary."
	echo -e "[\e[1;31mERROR\e[0m]: Contact ADI developers for more assistance.\n"

	# TODO(5-1-2023): Uncomment this when MAX32572 and MAX32570 are released.
	# exit 1
	fi

	# Exit out of msdk directory.
	cd ../${{ env.MSDK-INTERNAL_DIR }}/SVD/Devices/

	#---------------------------
	# Generate register files for all affected parts.
	echo -e "\n\e[0;33m==================================================================\n"
	echo -e "\e[0;33mGenerating register files for all affected parts"
	echo -e "\n\e[0;33m==================================================================\n"

	echo -e "Affected Parts: \e[1;33m$AFFECTED_DIE_LIST\n"

	# File with all the paths to each peripheral SVD files relating to the part.
	if [[ -n $AFFECTED_DIE_LIST ]]; then
	for die_name in $AFFECTED_DIE_LIST
	do
	echo -e "[\e[1;33m$die_name\e[0m] Generating Register Files."
	cd $die_name

	if [[ ! (-d ./chip_test) ]]; then
	chmod u+x makeRegs.sh
	makeregs_log=$(bash makeRegs.sh ubuntu)
	fi

	# This list keeps track of all the affected register files for each part.
	# Helps minimize runtime by using a temporary list as a checklist instead of fully reiterating.
	updated_part_list=${CHANGED_REG_FILES_PER_PART[$die_name]}

	# Find parts dependent on current peripheral SVD file.
	# Read chip_periph.txt
	if [[ -n $updated_part_list ]]; then
	# Check whether one of the changed register files matches with SVD path
	for changed_reg_file in ${CHANGED_REG_FILES_PER_PART[$die_name]}
	do
	# Isolate peripheral of changed register file to find corresponding peripheral SVD file
	periph=${changed_reg_file##*/}
	periph="/${periph%_regs.h}"

	# Check if peripheral SVD file matches with changed register file using the peripheral name
	match_line=$(find $CHIP_PERIPH -exec grep -s "$periph" {} \;)
	if [[ -n $match_line ]]; then
	svd_path=${match_line##*./}
	svd_path=${svd_path%%;*}

	REGISTER_SVD_FILE_LIST[$changed_reg_file]=$svd_path

	# Remove found register file from list to minimize run time by remaking list
	new_list=""
	for remaining_file in $updated_part_list
	do
	# Exclude found register file
	if [[ "$changed_reg_file" != "$remaining_file" ]]; then
	# Add a space as a delimiter if list has more than one item
	if [[ -n $updated_part_list ]]; then
	new_list+=" "
	fi

	new_list+=$remaining_file
	fi
	done

	updated_part_list=$new_list
	fi
	done
	fi

	echo -e "[\e[1;33m$die_name\e[0m] Completed.\n"

	cd ../
	done
	fi

	echo -e "\e[0;32mFinished Generating Register Files."

	# Exit current directory and return to workspace.
	cd ../../../

	#---------------------------
	echo -e "\n\e[0;33m==================================================================\n"
	echo -e "\e[0;33mComparing each Updated Register File to Generated Register File."
	echo -e "\n\e[0;33m==================================================================\n"

	# NOTE: This section is heavy on conditional statements to handle all possible log outputs.

	CHECK_FAIL=0
	set +e
	for affected_pr_reg_file in "${!DIFF_PR_REG_TO_SVD_REG_LIST[@]}"
	do
	# Make sure the generated register file exists by checking if there's a same file name register file that was generated by the SVD scripts.
	# If it doesn't, you've added a new register file. Please contact the developers.
	if [[ -f ${DIFF_PR_REG_TO_SVD_REG_LIST[$affected_pr_reg_file]} ]]; then
	echo -e "[\e[0;37mCOMPARING\e[0m] Changed: \e[1;33m$affected_pr_reg_file \e[0m==> Generated: \e[0;32m${DIFF_PR_REG_TO_SVD_REG_LIST[$affected_pr_reg_file]}"
	diff -u $affected_pr_reg_file ${DIFF_PR_REG_TO_SVD_REG_LIST[$affected_pr_reg_file]}
	check_reg_diff_return=$?

	# Find all files linked to
	periph=${affected_pr_reg_file##*/}
	periph=${periph%_regs.h}
	chip_name=${affected_pr_reg_file#*/Maxim/}
	chip_name=${chip_name%%/*}
	linked_reg_files_to_current_svd_file=$(find_linked_register_files ${REGISTER_SVD_FILE_LIST[${affected_pr_reg_file#./*/}]} $periph $chip_name .)

	# Check return for any differences and if there are any linked register files to update
	if [[ $check_reg_diff_return != 0 \|\| -n $linked_reg_files_to_current_svd_file ]]; then
	if [[ $check_reg_diff_return != 0 ]]; then
	echo -e "[\e[0;31mERROR\e[0m] \e[1;33m${affected_pr_reg_file#./*/} \e[0mdoes not match with corresponding SVD File."
	else
	echo -e "[\e[0;31mERROR\e[0m] Register File and corresponding Peripheral SVD File are synced, but there are other parts' register files dependent on this Peripheral SVD File."
	fi

	# DO NOT CHANGE register file if there is no corresponding SVD file. That means the register file is deprecated, and
	# non-deprecated version should be updated
	# REGISTER_SVD_FILE_LIST paths relative to script location being in the msdk repo but running pwd shows it's outside of msdk and msdk-internal repos.
	if [[ -f "./${{ env.MSDK_DIR }}/${REGISTER_SVD_FILE_LIST[${affected_pr_reg_file#./*/}]}" ]]; then
	if [[ $check_reg_diff_return != 0 ]]; then
	echo -e " Please make sure both register file and SVD file are synced:"
	echo -e " \e[1;31m${affected_pr_reg_file#./*/}"
	echo -e " \e[1;31m${REGISTER_SVD_FILE_LIST[${affected_pr_reg_file#./*/}]}"
	fi

	if [[ -n $linked_reg_files_to_current_svd_file ]]; then
	echo -e " Please sync up all other register files linked to the peripheral SVD file - (${REGISTER_SVD_FILE_LIST[${affected_pr_reg_file#./*/}]}):"

	for change_linked_reg_files in $linked_reg_files_to_current_svd_file
	do
	echo -e " \e[1;31m$change_linked_reg_files"
	done
	fi

	# New line for log output readability.
	echo -e "\n"
	else
	# Unsupported (Deprecated) register file. You can update as you like but it won't be added in the user guide if deprecated.
	echo -e "[\e[0;31mERROR\e[0m] The corresponding peripheral SVD file does not exist or was renamed. This register file is most likely deprecated or unsupported. Please contact ADI developers if this is incorrect."
	echo -e "[\e[1;33mWARNING\e[0m] Changes to this file should not be committed. No current MSDK project or library should be dependent on this file. If any MSDK file is dependent on this register file, then please remove support of this register file or contact ADI developers.\n\n"
	fi
	CHECK_FAIL=1
	else
	echo -e "[\e[0;32mVERIFIED\e[0m] Register File and Corresponding Peripheral SVD File are synced.\n"
	fi
	else
	echo -e "[\e[0;37mVERIFYING\e[0m] Changed: \e[1;33m${affected_pr_reg_file#./*/}."

	CHECK_FAIL=1

	# Prevent find error for missing files
	check_for_at_deprecated=""
	if [[ -f $affected_pr_reg_file ]]; then
	check_for_at_deprecated=$(find $affected_pr_reg_file -exec grep -s "@deprecated" {} \;)
	fi

	if [[ -n $check_for_at_deprecated ]]; then
	# Exception for deprecated register files.
	echo -e "[\e[0;31mERROR\e[0m] DO NOT UPDATE. This file is deprecated. Please contact ADI developers for more support.\n\n"

	# Changing Deprecated Files doesn't matter.
	CHECK_FAIL=0
	else
	# Exception for entirely new register files.
	if [[ -n ${REGISTER_SVD_FILE_LIST[${affected_pr_reg_file#./*/}]} ]]; then
	echo -e "[\e[0;31mERROR\e[0m] Could not find ${REGISTER_SVD_FILE_LIST[${affected_pr_reg_file#.//}]} for ${affected_pr_reg_file#.//}. Please add the correct SVD file. Contact the developers if you are adding a new register file.\n\n"
	else
	# Exception for deleted files.
	# If the script reaches this point, then that means an unsupported file was deleted. Typically, that means a deprecated file was deleted.
	# The action will not fail if an unsupported file was deleted, but be wary of what was deleted.
	# Note: If no SVD file was added to REGISTER_SVD_FILE_LIST, then it's likely a deprecated file.
	CHECK_FAIL=0
	echo -e "[\e[0;31mWARNING\e[0m] Could not find corresponding peripheral SVD file for ${affected_pr_reg_file#./*/}. Please confirm this is correct. Contact the developers for any assistance.\n\n"
	fi
	fi
	fi
	done
	set -e

	exit $CHECK_FAIL

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

fix(Boards, Examples): Fix MAX32690 GPIO Example #2012

Workflow file

fix(Boards, Examples): Fix MAX32690 GPIO Example #2012

Jobs

Run details

Workflow file for this run