Skip to content

Latest commit

 

History

History
472 lines (360 loc) · 18.9 KB

opentype-shaping-arabic-general.md

File metadata and controls

472 lines (360 loc) · 18.9 KB
Raw

Arabic-style shaping in OpenType

This document details the general shaping procedure shared by Arabic, N'Ko, Syriac, and Mongolian.

Table of Contents

General information

Several scripts can be supported by the general OpenType shaping model used for Arabic. These writing systems observe similar rules and conventions, even if they are not historically related to Arabic. Therefore, OpenType defines many of the same GSUB and GPOS features as supported for the corresponding script tags. These scripts include:

The information found below is intended to serve as a general guide; script-specific information can be found in the linked document for each script.

Each of these writing systems uses a joining script that uses inter-word spaces. Therefore, each codepoint in a text run may be substituted with one of several contextual forms corresponding to what, if any, characters appear before and after the codepoint. Most, but not all, letter sequences join; shaping engines must track which positions trigger joining behavior for each letter.

Arabic, N'Ko, and Syriac are written (and, therefore, rendered) from right to left. Mongolian is written vertically, from top to bottom. Shaping engines must track the directionality of the text run when scripts of different direction are mixed.

Terminology

OpenType shaping uses a standard set of terms for elements of the supported scripts. The terms used colloquially in any particular language may vary, however, potentially causing confusion.

Base glyph or character is the standard term for a character that is capable of taking a diacritical mark.

Kashida (or tatweel) is the term for a glyph inserted into a sequence for the purpose of elongating the baseline stroke of a letter. Unicode documents use the term "tatweel" most frequently, while OpenType documents use the term "kashida" most frequently. Kashidas are typically inserted in order to justify lines of text.

Glyph classification

In joining (or cursive) scripts, proper shaping of text runs involves identifying the joining behavior of each character, then combining that information with any preceding or subsequent characters to determine the contextually correct form for display.

Joining properties

Characters are assigned a JOINING_TYPE property in the Unicode standard that indicates how they join to adjacent characters. There are six possible values:

  • JOINING_TYPE_LEFT indicates that a character joins with the subsequent character, but does not join with the preceding character.

  • JOINING_TYPE_RIGHT indicates that a character joins with the preceding character, but does not join with the subsequent character.

  • JOINING_TYPE_DUAL indicates that a character joins with the preceding character and joins with the subsequent character.

  • JOINING_TYPE_NON_JOINING indicates that a character does not join with the preceding or with the subsequent character.

  • JOINING_TYPE_TRANSPARENT indicates that the character does not join with adjacent characters and that the character must be skipped over when the shaping engine is evaluating the joining positions in a sequence of characters. When a JOINING_TYPE_TRANSPARENT character is encountered in a sequence, the JOINING_TYPE of the preceding character passes through. Diacritical marks are frequently assigned this value.

  • JOINING_TYPE_JOIN_CAUSING indicates that the character forces the use of joining forms with the preceding and subsequent characters. Kashidas and the Zero Width Joiner (U+200D) are both JOIN_CAUSING characters.

In some scripts (such as Arabic and Syriac), letters are also assigned to a JOINING_GROUP that indicates which fundamental character they behave like with regard to joining behavior. Each of the basic letters in the script typically belongs to its own JOINING_GROUP, while supplemental and accented letters are usually assigned to the JOINING_GROUP that corresponds to the underlying base letter, with no diacritics or other marks.

For example, the Persian letter "Peh" (U+067E) is visually represented as the Arabic letter "Beh" (U+0628), but with two additional below-base "ijam" marks. Consequently, "Peh" is assigned to the BEH JOINING_GROUP.

Mongolian and N'Ko, notably, do not make use of joining groups. Every letter in these scripts belongs to the null or NO_JOINING_GROUP group.

Mark classification

The Unicode standard defines a canonical combining class for each codepoint that is used whenever a sequence needs to be sorted into canonical order.

The marks in most scripts belong to the standard combining classes. For example:

Codepoint Combining class Glyph
U+064B 27 ً Fathatan / Open fathatan
U+064C 28 ٌ Dammatan / Open dammatan
U+064D 29 ٍ Kasratan / Open Kasratan
U+064E 30 َ Fatha / Small fatha
U+064F 31 ُ Damma / Small damma
U+0650 32 ِ Kasra / Small kasra
U+0651 33 ّ Shadda
U+0652 34 ْ Sukun
U+0670 35 ٰ Superscript Alef
220 Other below-base combining marks
230 Other above-base combining marks

The numeric values of these combining classes are used during Unicode normalization. Sequences of marks are sorted by combining class, reordering the sequence into increasing numerical order.

In addition, some Arabic and Syriac marks require special handling when shaping Arabic text, during the mark-reordering stage. These marks fall into two classes of Modifier Combining Marks (MCM) that may need to be repositioned closer to the base character, when they occur in sequences of multiple marks.

The sets are:

  • Below-base (class 220) MCMs
  • Above-base (class 230) MCMs

These classifications are used in the mark-transient-reordering stage.

Lists of the marks that belong to each MCM classes are included in the script-specific shaping documents for Arabic and Syriac.

Character tables

Character tables for all of the scripts, plus important miscellaneous characters, are available here:

The general Arabic-based shaping model

Processing a run of text tagged with any of the scripts supported by the general Arabic shaping model involves seven top-level stages:

  1. Transient reordering of modifier combining marks
  2. Compound character composition and decomposition
  3. Computing letter joining states
  4. Applying the stch feature
  5. Applying the language-form substitution features from GSUB
  6. Applying the typographic-form substitution features from GSUB
  7. Applying the positioning features from GPOS

1. Transient reordering of modifier combining marks

Note: the transient reordering of modifier combining marks is necessary only for scripts that can feature the "Shadda" mark or marks that belong to Modifier Combining Marks (MCM) classes.

Sequences of adjacent marks must be reordered so that they appear in the appropriate visual order before the mark-to-base and mark-to-mark positioning features from GPOS can be correctly applied.

In particular, those marks that have strong affinity to the base character must be placed closest to the base.

This mark-reordering operation is distinct from the standard, cross-script mark-reordering performed during Unicode normalization. The standard Unicode mark-reordering algorithm is based on comparing the Canonical_Combining_Class (Ccc) properties of mark codepoints, whereas this script-specific reordering utilizes the Modifier_Combining_Mark (MCM) subclasses specified in the character tables.

The algorithm for reordering a sequence of marks is:

  • First, move any "Shadda" (combining class 33) characters to the beginning of the mark sequence.

  • Second, move any subsequence of combining-class-230 characters that begins with a 230_MCM character to the beginning of the sequence, before all "Shadda" characters. The subsequence must be moved as a group.

  • Finally, move any subsequence of combining-class-220 characters that begins with a 220_MCM character to the beginning of the sequence, before all "Shadda" characters and before all class-230 characters. The subsequence must be moved as a group.

Note: Unicode describes this mark-reordering operation, the Arabic Mark Transient Reordering Algorithm (AMTRA), in Technical Report 53, which describes it in terms that are distinct from standard, Ccc-based mark reordering.

Specifically, AMTRA is designated as an operation performed during text rendering only, which therefore does not impact other Unicode-compliance issues such as allowable input sequences or text encoding.

However, shaping engines may choose to perform the reordering of modifier combining marks in conjunction with their Unicode normalization functionality for increased efficiency.

2. Compound character composition and decomposition

The ccmp feature allows a font to substitute

  • mark-and-base sequences with a pre-composed glyph including both the mark and the base (as is done in with a ligature substitution)

  • individual compound glyphs with the equivalent sequence of decomposed glyphs (such as decomposing a letter with ijam into a separate fundamental-letter glyph followed by an ijam-only glyph, to permit more precise positioning)

If present, these composition and decomposition substitutions must be performed before applying any other GSUB or GPOS lookups, because those lookups may be written to match only the ccmp-substituted glyphs.

3. Computing letter joining states

In order to correctly apply the initial, medial, and final form substitutions from GSUB during stage 6, the shaping engine must tag every letter for possible application of the appropriate feature.

Note: not all of the rules detailed below apply to every script that is supported by the general Arabic shaping model.

To determine which feature is appropriate, the shaping engine must examine each word in turn and compute each letter's joining state from the letter's JOINING_TYPE and the JOINING_TYPE of the preceding character (if any).

Note: Although the supported scripts use inter-word spaces, the init feature does not refer to word-initial letters only and the fina feature does not refer to word-final letters only.

Rather, both of these terms are defined with respect to whether or not the preceding and subsequent letters form joins with the current letter. The letters at word boundaries will, naturally, take on initial and final forms, but initial and final forms of letters also occur regularly within words, when the letter in question is adjacent to a letter that does not form joins.

This computation starts from the first letter of the word, temporarily tagging the letter for isol substitution. If the first letter is the only letter in the word, the isol tag will remain unchanged.

From here, the algorithm consumes each character in the string, one at a time, keeping track of the JOINING_TYPE of the previous character.

If the current character is JOINING_TYPE_TRANSPARENT, move on to the next character but preserve the currently-tracked JOINING_TYPE at its previous state.

If the preceding character's JOINING_TYPE is LEFT, DUAL, or JOIN_CAUSING:

  • In <syrc> text, if the current character is "Alaph", tag the current character for med2, then update the tag for the preceding character:
    • isol becomes init
    • fina becomes medi
    • init remains init
    • medi remains medi
  • If the current character's JOINING_TYPE is RIGHT, DUAL, or JOIN_CAUSING, tag the current character for fina, then update the tag for the preceding character:
    • isol becomes init
    • fina becomes medi
    • init remains init
    • medi remains medi
  • If the current character's JOINING_TYPE is LEFT or NON_JOINING, tag the current character for isol, then update the tag for the preceding character:
    • medi becomes fina
    • init becomes isol
    • fina remains fina
    • isol remains isol

If the preceding character's JOINING_TYPE is RIGHT or NON_JOINING:

  • Tag the current character for isol, then update the tag for the preceding character:
    • medi becomes fina
    • init becomes isol
    • fina remains fina
    • isol remains isol

After testing the final character of the word, if the text is in <syrc> and current (final) character is "Alaph", perform an additional test:

  • If the preceding character's JOINING_GROUP is DALATH_RISH, tag the current character for fin3, then update the tag for the preceding character:
    • medi becomes fina
    • init becomes isol
    • fina remains fina
    • isol remains isol
  • If the preceding character's JOINING_GROUP is not DALATH_RISH, tag the current character for fin2, then update the tag for the preceding character:
    • medi becomes fina
    • fin2 becomes fina
    • fin3 becomes fina
    • init becomes isol
    • fina remains fina
    • isol remains isol
    • med2 remains med2

Once the last character of the word has been processed, proceed to the next word and repeat the algorithm, starting at the beginning of the next word.

Note: Because the processing of the characters in the algorithm described above is deterministic, shaping engines may choose to implement the joining-state computation as a state machine, in a lookup table, or by any other means desirable.

At the end of this process, all letters should be tagged for possible substitution by one of the isol, init, medi, or fina features.

4. Applying the stch feature

The stch feature decomposes and stretches special marks that are meant to extend to the full width of words to which they are attached. It was defined for use in <syrc> text runs for the "Syriac Abbreviation Mark" (U+070F) but it can be used with similar marks in other scripts.

To apply the stch feature, the shaping engine should first decompose the U+070F glyph into components, which results in a beginning point, midpoint, and endpoint glyphs plus one (or more) extension glyphs: at least one extension between the beginning and midpoint glyphs and at least one extension between the midpoint and endpoint glyphs.

The shaping engine must then calculate the total length of the word to which the mark applies. That length, minus the advance widths of the beginning, middle, and endpoint glyphs of the mark, must be divided by two.

The result, divided by the advance width of the extension glyph and rounded up to the next integer, tells the shaping engine how many copies of the extension glyph must be placed between the midpoint and each end of the mark.

Following this procedure ensures that the same number of extensions is used on each side of the mark so that it remains symmetrical.

Finally, the decomposed mark must be reordered as follows:

  • All of the glyphs in the sequence for the mark, except for the final glyph, are repositioned as a group so that they precede the word to which the mark is attached.
  • The final glyph in the mark sequence is repositioned to the end of the word.

5. Applying the language-form substitution features from GSUB

The language-substitution phase applies mandatory substitution features using the rules in the font's GSUB table. In preparation for this stage, glyph sequences should be tagged for possible application of GSUB features.

The order in which these substitutions must be performed is fixed for all scripts implemented with the Arabic shaping model:

locl
isol
fina
fin2 (only used in Syriac)
fin3 (only used in Syriac)
medi
med2 (only used in Syriac)
init
rlig
rclt
calt

See the individual script pages for further detail on each feature and for script-specific information.

Note: Strictly speaking, the use of localized-form substitutions is not part of the shaping process, but of the localization process, and could take place at an earlier point while handling the text run. However, shaping engines are expected to complete the application of the locl feature before applying the subsequent GSUB substitutions in the following steps.

6. Applying the typographic-form substitution features from GSUB

The typographic-substitution phase applies optional substitution features using the rules in the font's GSUB table.

The order in which these substitution must be performed is fixed for all scripts implemented in the Arabic shaping model:

liga
dlig
cswh
mset

See the individual script pages for further detail on each feature and for script-specific information.

7. Applying the positioning features from GPOS

The positioning stage adjusts the positions of mark and base glyphs.

The order in which these features are applied is fixed for all scripts implemented in the Arabic shaping model:

curs
kern
mark
mkmk

See the individual script pages for further detail on each feature and for script-specific information.