From 2d49f8c4f6873cf1521698f9795704e30cc5f463 Mon Sep 17 00:00:00 2001 From: caternuson Date: Wed, 20 Sep 2023 10:42:00 -0700 Subject: [PATCH 1/2] add example --- .../.feather_esp32s2_tft.test.only | 0 .../PID5752_QuadEncoder_TFTDemo.ino | 143 ++++++++++++++++++ 2 files changed, 143 insertions(+) create mode 100644 examples/encoder/PID5752_QuadEncoder_TFTDemo/.feather_esp32s2_tft.test.only create mode 100644 examples/encoder/PID5752_QuadEncoder_TFTDemo/PID5752_QuadEncoder_TFTDemo.ino diff --git a/examples/encoder/PID5752_QuadEncoder_TFTDemo/.feather_esp32s2_tft.test.only b/examples/encoder/PID5752_QuadEncoder_TFTDemo/.feather_esp32s2_tft.test.only new file mode 100644 index 0000000..e69de29 diff --git a/examples/encoder/PID5752_QuadEncoder_TFTDemo/PID5752_QuadEncoder_TFTDemo.ino b/examples/encoder/PID5752_QuadEncoder_TFTDemo/PID5752_QuadEncoder_TFTDemo.ino new file mode 100644 index 0000000..8986107 --- /dev/null +++ b/examples/encoder/PID5752_QuadEncoder_TFTDemo/PID5752_QuadEncoder_TFTDemo.ino @@ -0,0 +1,143 @@ +/* + * This is a demo for a Feather ESP32-S2 TFT connected to a Quad + * Rotary Encoder board + * https://www.adafruit.com/product/5300 + * https://www.adafruit.com/product/5752 + * + */ +#include "Adafruit_seesaw.h" +#include +#include +#include +// we hvae loooots of PSRAM so lets use a GFX canvas for flicker-free graphics! +GFXcanvas16 canvas(240, 135); +Adafruit_ST7789 display = Adafruit_ST7789(TFT_CS, TFT_DC, TFT_RST); + + +#define SS_NEO_PIN 18 +#define SS_ENC0_SWITCH 12 +#define SS_ENC1_SWITCH 14 +#define SS_ENC2_SWITCH 17 +#define SS_ENC3_SWITCH 9 + +#define SEESAW_ADDR 0x49 + +Adafruit_seesaw ss = Adafruit_seesaw(&Wire); +seesaw_NeoPixel pixels = seesaw_NeoPixel(4, SS_NEO_PIN, NEO_GRB + NEO_KHZ800); + +int32_t enc_positions[4] = {0, 0, 0, 0}; + +void setup() { + Serial.begin(115200); + //while (!Serial) delay(10); + + pinMode(TFT_BACKLITE, OUTPUT); + digitalWrite(TFT_BACKLITE, LOW); + + // turn on the TFT / I2C power supply + pinMode(TFT_I2C_POWER, OUTPUT); + digitalWrite(TFT_I2C_POWER, HIGH); + delay(10); + + Serial.println("Looking for seesaw!"); + + if (! ss.begin(SEESAW_ADDR) || !pixels.begin(SEESAW_ADDR)) { + Serial.println("Couldn't find seesaw on default address"); + while(1) delay(10); + } + Serial.println("seesaw started"); + uint32_t version = ((ss.getVersion() >> 16) & 0xFFFF); + if (version != 5752){ + Serial.print("Wrong firmware loaded? "); + Serial.println(version); + while(1) delay(10); + } + Serial.println("Found Product 5752"); + + ss.pinMode(SS_ENC0_SWITCH, INPUT_PULLUP); + ss.pinMode(SS_ENC1_SWITCH, INPUT_PULLUP); + ss.pinMode(SS_ENC2_SWITCH, INPUT_PULLUP); + ss.pinMode(SS_ENC3_SWITCH, INPUT_PULLUP); + ss.setGPIOInterrupts(1UL << SS_ENC0_SWITCH | 1UL << SS_ENC1_SWITCH | + 1UL << SS_ENC2_SWITCH | 1UL << SS_ENC3_SWITCH, 1); + + + // get starting positions + for (int e=0; e<4; e++) { + enc_positions[e] = ss.getEncoderPosition(e); + ss.enableEncoderInterrupt(e); + } + + Serial.println("Turning on interrupts"); + + pixels.setBrightness(255); + pixels.show(); // Initialize all pixels to 'off' + + display.init(135, 240); // Init ST7789 240x135 + display.setRotation(3); + display.fillScreen(ST77XX_BLUE); + digitalWrite(TFT_BACKLITE, HIGH); + + canvas.setFont(&FreeSans12pt7b); + canvas.setTextColor(ST77XX_WHITE); +} + +uint8_t switch_pins[] = {SS_ENC0_SWITCH, SS_ENC1_SWITCH, SS_ENC2_SWITCH, SS_ENC3_SWITCH}; + +void loop() { + bool changed = false; + canvas.fillScreen(ST77XX_BLACK); + canvas.setCursor(0, 25); + canvas.setTextColor(ST77XX_WHITE); + //canvas.println("Quad Encoder QT Demo"); + + for (int e=0; e<4; e++) { + int32_t new_enc_position = ss.getEncoderPosition(e); + // did we move around? + if (enc_positions[e] != new_enc_position) { + Serial.print("Rot. #"); + Serial.print(e); + Serial.print(" -> "); + Serial.println(new_enc_position); // display new position + enc_positions[e] = new_enc_position; // and save for next round + + // change the neopixel color, mulitply the new positiion by 4 to speed it up + pixels.setPixelColor(e, Wheel((new_enc_position*4) & 0xFF)); + pixels.show(); + changed = true; + } + canvas.setTextColor(ST77XX_WHITE); + canvas.print("Rotary #"); + canvas.print(e); + canvas.print(": "); + canvas.print(enc_positions[e]); + + if (! ss.digitalRead(switch_pins[e])) { + Serial.print("ENC"); + Serial.print("e"); + Serial.println("pressed!"); + canvas.setTextColor(ST77XX_RED); + canvas.print(" DOWN"); + changed = true; + } + canvas.println(); + } + + if (changed) { + display.drawRGBBitmap(0, 0, canvas.getBuffer(), 240, 135); + } +} + + +uint32_t Wheel(byte WheelPos) { + WheelPos = 255 - WheelPos; + if (WheelPos < 85) { + return seesaw_NeoPixel::Color(255 - WheelPos * 3, 0, WheelPos * 3); + } + if (WheelPos < 170) { + WheelPos -= 85; + return seesaw_NeoPixel::Color(0, WheelPos * 3, 255 - WheelPos * 3); + } + WheelPos -= 170; + return seesaw_NeoPixel::Color(WheelPos * 3, 255 - WheelPos * 3, 0); +} From c1eeacc04f67b5b974591e5343d771799799ebb4 Mon Sep 17 00:00:00 2001 From: caternuson Date: Wed, 20 Sep 2023 11:14:56 -0700 Subject: [PATCH 2/2] add feather esp32s2 tft to ci check --- .github/workflows/githubci.yml | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/.github/workflows/githubci.yml b/.github/workflows/githubci.yml index c62f62f..c86c8b9 100644 --- a/.github/workflows/githubci.yml +++ b/.github/workflows/githubci.yml @@ -7,7 +7,7 @@ jobs: strategy: fail-fast: false matrix: - arduino-platform: ["uno", "leonardo", "mega2560", "zero", "esp8266", "esp32", "metro_m4", "nrf52840"] + arduino-platform: ["uno", "leonardo", "mega2560", "zero", "esp8266", "esp32", "feather_esp32s2_tft", "metro_m4", "nrf52840"] runs-on: ubuntu-latest