Skip to content

Latest commit

 

History

History
20 lines (13 loc) · 923 Bytes

README.md

File metadata and controls

20 lines (13 loc) · 923 Bytes
Raw

Mediaknob

mediaknob

This is a DIY media control knob for your computer. Adjust your volume, skip songs, or press & hold the knob for attention mode.

Print the parts, solder the components, and upload the firmware. Go to instruction.md to see how to assemble and run the Mediaknob.

Features

  • Turn Clockwise: Turn volume up
  • Turn Counter-Clockwise: Turn volume down
  • Single Click: Pause/Play
  • Double Click: Next song
  • Tripple Click: Previous song
  • Long Click Hold: Attention mode (Mutes volume while the button is pressed)

Acknowledgements

The knob is our first try at building a physical device. Although this is very different, the initial inspiration came from the Smartknob. This project was a relatively simple test to get our feet wet in 3D printing and electronics.