Skip to content
PumaBlack edited this page Jan 12, 2016 · 8 revisions

(Tested with MC 1.7.10)

Anchor

Used if you need to anchor to a point consistently. Do it in this order:

  1. place one anchor on the ground an set it as ground-anchor (RIGHT CLICK)
  2. place the second anchor on your ship and set it as ships-anchor (SHIFT RIGHT CLICK)
  3. then activate the anchor-setup at the ships-anchor (RIGHT CLICK on it (no shift))

You can read in the chat, that the position was saved.

Both anchors will aling on top of each other with ONE BLOCK of space. Now if you align within range (about 20 blocks) of the anchor, the ship will snap to the position of the ground anchor!

HINTS TO AVOID GAMECRASHS:

If you move your ship, the Archimedes Ships Mod Plus creates a mobile entity, whitch is wrapped into an invisible four-side box. The edges of this box are the outermost (last) blocks on each side. Make sure, that the ships-anchor-block is the deepest block on the bottom of your ship!!!

If it is not the deepest, the ship tryes to aling with the ground-anchor with one block space. The ground-anchor penetrates the four-side box. That is impossible because you cant fly through a mountain :). This crashes the game.

Clone this wiki locally